Thiophene-based dendronized macromonomers and polymers

The synthesis of thiophene-containing second (G2) and third generation (G3) dendronized macromonomers with methacrylate polymerizable units as well as their corresponding dendronized polymers is reported. The dendrons are prepared from branched thiophene oligomers and are decorated with straight alkyl chains for solubility reasons. The polymerization reactions were done with AIBN as initiator and the polymers were characterized by NMR spectroscopy, elemental analysis and GPC. Molar masses are in the range of 2.2-5.4 × 10⁵ g mol⁻¹ (G2) and 1.3-3.0 × 10⁴ g mol⁻¹ (G3) for different runs. These polymers are investigated by cyclic voltammetry and optical spectroscopy.     

日本水处理混凝剂行业考察

日本在水处理混凝剂研发、生产、管理和应用方面都具有国际先进水平。介绍了日本水处理主宴混凝剂——聚氯化铝（PAC）和硫酸铝（AS）的产业现状，新混凝剂聚硅氯化铁的研发推广工作，水处理药剂标准的制定和管理，以及混凝剂的生产应用效果。文中有详尽的统计资料，可供中国水处理行业参考。     

Photopolymerization of HEMA/DEGDMA hydrogels in solution

Photopolymerization is a widely used technique to synthesize polymers and hydrogels. The commonly used ultraviolet (UV)-curable mono-, di- or multifunctional vinylated monomers are often volatile, causing difficulty in kinetics analysis such as photo-differential scanning calorimetry (PhotoDSC). In this work, the DSC sample pan is chemically and physically modified such that the resin can be placed uniformly in the sample pan with minimum sample weight loss during measurement. This approach substantially improved experimental accuracy, which in turn provides a better understanding of the reaction kinetics of UV-curable polymers. Kinetic experiments were carried out for poly(2-hydroxyethyl methacrylate) (HEMA)-based hydrogels. The effects of light intensity and water concentration on the reaction kinetics and rheological change was investigated. It was found that increasing the light intensity enhances the polymerization, but too high an intensity slows down the reaction at the later stage. The addition of solvent and high light intensity facilitates the cyclization, delaying macrogelation. The viscosity rise of the resin system and the formed polymer size were also measured using a photorheometer and a particle size analyzer, respectively. The measured gel time, gel conversion and polymer size distribution agree with the kinetic analysis.     

Thermal stability of NO 2 ⋅ and NO⋅ radicals formed in an Al23 catalyst during its preparation from a nitrate precursor

During the preparation of alumina as a catalyst support from aluminium nitrates by precipitation with a NH₄OH base, NO ₂ ^⋅ radicals have been formed in the catalyst after calcination under air in the solid at different temperatures. These radicals remained stable until a calcination temperature of 800°C. When the calcined catalyst was degassed under vacuum above 300 °C, the NO ₂ ^⋅ was reduced to give NO^⋅ and O^- species which were both tightly trapped in the solid. These latter species remained stable until vacuum treatment at 800 °C. This revised version was published online in July 2006 with corrections to the Cover Date.     

硫酸氢钠催化合成苯甲酸正丁酯的研究

以硫酸氢钠为催化剂，催化合成了苯甲酸正丁酯，并用正交实验法确定了反应的最佳条件：催化剂用量为0．6g／0．1mol苯甲酸，醇酸物质的量比为2：1，回流时间为3．5-4．0h。苯甲酸的酯化率可达98％。该催化剂催化效果好，用量少，酯化率高，污染小，价廉易得，具有工业应用价值。     

Graft Copolymerization of Acrylamide onto Oil Palm Empty Fruit Bunch (OPEFB) Fiber

Grafting of acrylamide (AAm) onto oil palm empty fruits bunch fiber using hydrogen peroxide as initiator and methyl acrylate as comonomer was investigated. The amount of comonomer needed to make grafting of acrylamide possible was determined. The percentage of poly(acrylamide) and the comonomer in the final graft copolymer was estimated by elemental analysis. Results obtained indicated that methyl acrylate facilitated the incorporation of acrylamide monomer onto OPEFB. The reactivity ratios for both monomers were determined by using Fineman–Ross plot. The effects of reaction temperature and period as well as amount of the initiator, solvent, monomer and comonomer on the percentage of grafting at fixed amount of comonomer (11 mmol) were studied. Maximum percentage of grafting was achieved when the amount of initiator and solvent 3.98×10⁻³ mol and 50 mL respectively. The optimum reaction temperature was 50 ^○C and the reaction period was 90 min. Highest percentage of grafting was 232% when 25.6 mmol of acrylamide was used under these optimum conditions. The presence of functional group in the grafted polymer is characterized by infrared spectroscopy and the surface morphology is observed by scanning electron microscopy. Thermoanalytic investigation on OPEFB and OPEFB-g-PAAM were carried out to evaluate the thermal stability and respective activation energy of the materials.     

Barocalorimetric technique for monitoring pressurized copolymer reactors

The problem of on‐line estimation of the conversion and composition evolutions in a pressurized batch copolymer reactor with temperature and pressure measurements was addressed. The estimation model consisted of mass and energy balances with a pressure equation built from phase‐equilibrium considerations. The application of a nonlinear geometric estimation approach yielded the underlying solvability condition with physical meaning, a straightforward estimator construction, and a conventional‐like tuning procedure. The resulting barocalorimetric estimator was an on‐line dynamic measurement processor with a model‐based predictor and a measurement‐driven corrector, and whose implementation did not require the polymerization rates and heat‐transfer coefficient function dependencies. The technique was tested with a representative laboratory styrene–butadiene system. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 475–482, 2005     

油田废水电解杀菌研究

采用电解杀菌技术处理油田废水，研究了电解时间、电流强度、极板间距以及电极联结方式等因素对废水中硫酸盐还原菌杀灭效果的影响。结果表明，油田废水经3min电解杀菌，硫酸盐还原菌杀灭率高达99．90％。随着电解时间的增加，硫酸盐还原菌的杀菌率进一步提高；电流强度增加，硫酸盐还原菌的杀灭率升高。在电流强度保持不变的情况下，随着极板间距增加，极板之间电压升高，更有利于杀灭硫酸盐还原菌。在极板间电流强度相同的条件下，两种电极联结方式的杀菌率差别不大，杀菌率均在99．9％以上。     

Effects of the solvent polarity on the atom transfer radical polymerization of methyl methacrylate initiated by 4‐(chloromethyl)phenyltrimethoxysilane

The controllability of the atom transfer radical polymerization of methyl methacrylate in the polar solvent N,N‐dimethylformamide and the nonpolar solvent xylene with 4‐(chloromethyl)phenyltrimethoxysilane as an initiator and with CuCl/2,2′‐bipyridine and CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine as catalyst systems was studied. Gel permeation chromatography analysis established that in the nonpolar solvent xylene, much better control of the molecular weight and polydispersity of poly(methyl methacrylate) was achieved with the CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine catalyst system than with the CuCl/2,2′‐bipyridine as catalyst system. In the polar solvent N,N‐dimethylformamide, unlike in xylene, the polymerization was more controllable with the CuCl/2,2′‐bipyridine catalyst system than with the CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine catalyst system. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2751–2754, 2007     

Configurational statistics of copolymers prepared by complex-radical polymerization

Radical copolymerization is considered theoretically taking into account the effect of complexing on the configurational statistics of macromolecules formed. Akinetic model has been developed that considers, apart from the ordinary addition of single monomer units to a propagating chain, the possible addition of monomer unit pairs along with a complexing agent in the form of a ternary complex. Within the framework of this model, the problem of calculating the probabilities of formation of any sequences of monomer units (taking into account their microtacticity) in a macromolecule has been rigorously solved as well as the problem of finding the composition distribution of the copolymer formed. It has been shown that this distribution is described by a conventional Gauss law and the appropriate parameters are given. Possible generalizations of the suggested approach are indicated.