基于模糊逻辑的电动汽车双源混合储能系统能量管理策略

针对电动汽车行驶过程中电池放电电流过大导致的电池容量衰减问题,构建了由锂离子动力电池、超级电容和多端口DC/DC变换器构成的全主动式混合储能系统,其中电流环控制器和电压环控制器分别控制输出电流和直流母线电压。结合超级电容SOC、整车需求功率和车速情况,根据建立的45条模糊控制规则,模糊逻辑控制器调节锂离子动力电池和超级电容的充放电功率,在车辆峰值功率需求较高时避免了高频电流波动对动力电池寿命的影响。同时在功率需求较低时,动力电池给超级电容充电。在HWFET工况下的实验结果表明所提出的全主动式双能量源混合储能系统和基于模糊逻辑的能量管理策略能够有效保护锂离子动力电池免受大电流波动影响,从而达到延长电池寿命的作用。     

电动车制动能量再生反馈控制研究

研究了电动汽车制动过程中的能量回馈，设计了混合励磁无刷电动机在汽车制动过程的能量再生反馈控制系统。以脉宽调制调压调速系统为例，研究各种制动态下的能量回馈过程。并将其安装在EV6600电动汽车上进行试验，结果表明：该控制系统可达到10%左右的能量回收效率。     

Fabrication of composite wire of lead coated on glass fiber by extrusion

1　INTRODUCTIONCoatingglassfiberwithleadproducesakindofnewcontinuouscomposite ,whichcanfindwideap plicationsinmanydifferentfields ,especiallyinthebatteryoftheEVsandHEVsthathasalreadybecomethemostimportantgoalinmostcountries[13] .Withakindofspecialtechnologythiskindofnewcompos itewirecanbeusedtoproducegridsofnewleadacidbatterythatisveryusefultotheEVsandHEVs .Thiskindofnewleadacidbatteryhasmanyadvan tages ,suchashigherspecificenergy ,lessinnerresis tance ,morequicklychargingcapabilityand…     

线控制动系统在轮式工业车辆上的实现

介绍了车辆线控制动系统BBW(Brake By Wire)的基本结构及原理，对线控技术在轮式车辆全动力制动系统上的实现进行了探讨。     

RH真空室插入管喷补车结构与性能分析

RH真空精炼装置的真空室插入管根据情况喷补耐火材料 ,其喷补设备有高架悬挂式与地面台车式两种类型。本文对这两种喷补车的结构和性能进行了分析比较 ,为喷补车的现场使用及设计研究提供了必要的依据     

2000年—2001年磁性功能材料研究和应用新进展

综述了磁性功能材料研究和应用在2000年－2001年间的新进展，其内容包括：（1）自旋电子学；（2）Bi-Fe氧化物的磁性；（3）稀有和稀土金属垂直磁记录材料；（4）新的多层膜磁性材料；（5）磁浮列车。     

蠕墨铸铁在铁道车辆制动系统中的应用研究

在分析车辆制动器摩擦温度场的基础上 ,研究蠕墨铸铁在铁道车辆制动系统中的使用性能 ;研究结果表明 ,在车辆制动器服役条件下 ,摩擦速度与接触压力的提高 ,摩擦副的摩擦系数显著降低 ,磨损率显著增加 ;在所研究的不同石墨形态的铸铁中 ,蠕墨铸铁不但具有低而稳定的磨损率 ,而且具有高而稳定的制动性能 ,是制造车辆制动器部件的合理选材。     

Axial characterization of catalytic activity in close-coupled lightoff and underfloor catalytic converters

A exhaust system consisting of a close-coupled Pd technology 32 in³ lightoff converter and Pt/Rh technology 170 in³ underfloor converter was vehicle-aged for 56000 miles on a vehicle equipped with a 3.8 l engine. Following this aging, the converters were taken off the vehicle and cut into 1″ thick sections along their axis and characterized for lightoff and warmed-up activity using a laboratory reactor to simulate vehicle exhaust. Each section was also analyzed for the quantity of oil additive poisons (phosphorus and zinc) deposited. Following this initial characterization, the phosphorus and zinc deposits were removed, and the sections were characterized again for lightoff and warmed-up activity. This procedure was used to qualitatively determine the relative contribution of oil additive poisoning and thermal sintering to the total activity deterioration as a function of axial position in the catalyst monoliths.

Analysis of the lightoff converter as taken from the vehicle showed a dramatic axial gradient in the lean and stoichiometric lightoff and warmed-up (600°C) performance for HC, CO and NO_x, with most of the deterioration having taken place in the forward-most 1″ section of the converter, which was consistent with the gradient in the deposition of phosphorus (P) and zinc (Zn) in this converter. Comparison of these data sets with those obtained after removal of the P and Zn poisons indicates that most of the total deterioration of lean HC and CO activity can be attributed to P and Zn poisoning of the forwardmost 1″ section. When tested under stoichiometric conditions, most of the deterioration of HC activity is attributable to P and Zn poisoning, while most of the deterioration of CO and NO_x activity is attributable to thermal deterioration. A similar activity and poison deposition gradient was detected in the underfloor converter, but to a smaller extent.     

Predicting and interpreting identification errors in military vehicle training using multidimensional scaling

We compared methods for predicting and understanding the source of confusion errors during military vehicle identification training. Participants completed training to identify main battle tanks. They also completed card-sorting and similarity-rating tasks to express their mental representation of resemblance across the set of training items. We expected participants to selectively attend to a subset of vehicle features during these tasks, and we hypothesised that we could predict identification confusion errors based on the outcomes of the card-sort and similarity-rating tasks. Based on card-sorting results, we were able to predict about 45% of observed identification confusions. Based on multidimensional scaling of the similarity-rating data, we could predict more than 80% of identification confusions. These methods also enabled us to infer the dimensions receiving significant attention from each participant. This understanding of mental representation may be crucial in creating personalised training that directs attention to features that are critical for accurate identification.

Practitioner Summary: Participants completed military vehicle identification training and testing, along with card-sorting and similarity-rating tasks. The data enabled us to predict up to 84% of identification confusion errors and to understand the mental representation underlying these errors. These methods have potential to improve training and reduce identification errors leading to fratricide.     

黑龙江化肥厂锅炉房用煤车、贮存、运输方案的优化设计

通过对原可行性研究报告中的锅炉房用煤采用筒仓群贮存方案的了解、分析、比较后,提出了采用矩形库贮存煤的优化方案设计的成果。