Extraction of penicillin G from simulated media by an emulsion liquid membrane process

The extraction of penicillin G from simulated media was performed by water/oil/water (w/o/w) emulsion liquid membranes (ELMs) and studied under various operational conditions in a batch system. The degree of extraction achieved was between 80% and 95% under specific conditions. A concentration of greater than nine times the initial concentration of penicillin G in the external phase was obtained in the internal phase. The pH of the internal aqueous solution, containing a basic salt, was theoretically calculated on the basis of the amount of penicillin G transported into the internal phase. The calculated results agreed with the experimental data well and were used to select a suitable type and concentration of a basic salt in the internal phase to give a pH within the range 5 to 8 where penicillin G was stable after the termination of extraction. The extraction of penicillin G was successfully performed by the ELM process with sodium carbonate in the internal phase.     

On the permeation rate of copper extraction through liquid membranes

The understanding of the permeation rate of metal ions through liquid membranes is important for the design of such systems. In this paper, the permeation rates of copper ions through liquid surfactant membranes, including interfacial reaction rates and the diffusion rate of the copper ion, were analyzed using a model based on a mobilized hollow spherical globule configuration. The analysis shows that the extracting reaction is dominant at the external interface of the membrane and the stripping reaction is dominant at the internal interface; this means the reactions at both interfaces are not in equilibrium during the course of extraction. It also shows that the extraction rate, the diffusion rate and the stripping rate are not of equal value, especially at the early stage of the run.     

Liquid–liquid extraction of a recombinant protein with reverse micelles

Recombinant cytochrome b₅ was extracted into the reversed micelle phase of an anionic surfactant (AOT) in octane and back-extracted to a final aqueous phase. The extraction of the protein was controlled by an electrostatic mechanism, since it was dependent on the global charge of the protein. This was directly demonstrated by experiments with native and mutant cytochromes obtained by site directed mutagenesis. The back-extraction of cytochrome b₅ to a fresh aqueous phase was decreased by factors that reduced the size of the water pool of the organic phase, such as high salt concentrations (1–2 mol dm^?3 NaCl) and low temperatures (4°C), probably because of an increase in a favourable interaction of this protein with the surfactant at closer distances.     

A survey of CSCW systems

Over the last decade, computer supported cooperative work (CSCW) has emerged as an identifiable research area that focuses on the role of the computer in group work. CSCW is a generic term which combines the understanding of the nature of group working with the enabling technologies of computer networking, systems support and applications. The paper examines the classes of system which have emerged to support cooperative working. A framework for characterising and describing CSCW systems is presented and four major classes of cooperative system identified. Each of these classes of cooperative system are examined highlighting their general characteristics and applicability to CSCW.     

醋酸纤维素—纤维素增强膜的结构特征和分离性能

本文描述了醋酸纤维素－纤维素大孔增强超滤膜的结构特征一分离性能之间的关系。详细论述了膜材料含量和粘连剂含量及其分子量对膜结构和性能的影响。论述了不同配方铸膜液的膜，其孔径，水通量和截留率随操作压力的变化规律。实验证明这种高强度的ＣＡＣ膜经多次重复使用后，其结构性能保持完好。     

聚乙烯醇膜的阻醇及导电性能(Ⅱ)戊二醛交联聚乙烯醇膜

为提高直接甲醇燃料电池(DMFC)用膜的阻醇性能，采用在渗透蒸发领域广泛使用且具有良好分离效果的聚乙烯醇(PVA)为主要材料，制备了戊二醛(GA)交联PVA膜，考察了此类膜的阻醇及质子导电能力。PVA(GA)膜的阻醇效果较目前在DMFC中广泛使用的Nation膜有显著提高，但其自身不具有质子导电能力，需外加电解质溶液以提高其电导率。     

The Problem of Estimating the Uncertainty of the Fixed Point Temperature Due to the Presence of Impurities

The main problems in estimating the uncertainty due to the presence of impurities in the material: the absence in the documents of a unique definition of the quantity being measured – the fixed point temperature, the lack of agreed methods of realizing the fixed points and the insufficient justification of the equations used for the estimate, are analyzed. The results of a measurement of the melting point of gallium are presented, which differ in the conditions in which they were realized – with one and two liquid-solid interfaces and different solidification conditions, are presented. The reasons for the considerable difference between the values of the temperatures obtained in these experiments are discussed.     

Effect of carbide additions on grain growth in TiC−Ni cermets

The growth of carbide particles in TiC-XC-2 vol.% Ni and TiC-XC-30 vol.% Ni alloys, where X=Zr, Cr, W, Ta and Mo, was fitted to an equation of the form d³-d_o ³=Kt. The grain growth behavior during liquid phase sintering at 1673K decreased markedly with the addition of Mo₂C or WC, changed little for TaC, and increased with the addition of ZrC or Cr₃C₂. The grain contiguity decreased with increasing Ni content in the TiC−Mo₂C−Ni alloy and was greater in the alloys with smaller growth rate constant. Consequently, the effect of carbide addition on the grain growth of 2 vol.% Ni alloys was found to be similar to that of 30 vol.% Ni alloys. The grain growth mechanism could be explained by the effect of contiguous carbide grain boundaries in restricting the overall grain growth, as well as the area of the solid/liquid interfaces in the alloy by the usual solution/reprecipitation model.     

A study on the interaction between ibuprofen and bilayer lipid membrane

Ibuprofen is a well-known nonsteroidal anti-inflammatory drug, which can interact with lipid membranes. In this paper, the interaction of ibuprofen with bilayer lipid membrane was studied by UV-vis spectroscopy, cyclic voltammetry and AC impedance spectroscopy. UV-vis spectroscopy data indicated directly that ibuprofen could interact with lipid vesicles. In electrochemical experiments, ibuprofen displayed a biphasic behavior on bilayer lipid membrane supported on a glassy carbon electrode. It could stabilize the lipid membrane in low concentration, while it induced defects formation, even removed off bilayer lipid membrane from the surface of the electrode with increasing concentration. The mechanism about the interaction between ibuprofen and supported bilayer lipid membrane was discussed.