A Model Coupling Method for Shape Prediction

 The shape of strip is calculated by iterative method which combines strip plastic deformation model with rolls elastic deformation model through their calculation results, which can be called results coupling method. Because the shape and rolling force distribution are very sensitive to strip thickness transverse distribution′s variation, the iterative course is rather unstable and sometimes convergence cannot be achieved. In addition, the calculating speed of results coupling method is low, which restricts its usable range. To solve the problem, a new model coupling method is developed, which takes the force distribution between rolls, rolling force distribution and strip′s exit transverse displacement distribution as basic unknowns, and integrates strip plastic deformation model and rolls elastic deformation model as a unified linear equations through their internal relation, so the iterative calculation between the strip plastic deformation model and rolls elastic deformation model can be avoided. To prove the effectiveness of the model coupling method, two examples are calculated by results coupling method and model coupling method respectively. The results of front tension stress, back tension stress, strip′s exit gauge, the force between rolls and rolling force distribution calculated by model coupling method coincide very well with results coupling method. However the calculation course of model coupling method is more steady than results coupling method, and its calculating speed is about ten times as much as the maximal speed of results coupling method, which validates its practicability and reliability.     

Effect of element Ru on microstructure and creep behaviour of single crystal nickel-based superalloy

By means of creep property measurement and microstructure observation, the influence of element Ru on the microstructure and creep behaviour of single crystal nickel-based superalloy is investigated. The results show that the plate-like μ phase is precipitated along {111} plane of the Ru-free alloy during thermal exposure at 1080°C and creep at 980°C. And the precipitation of μ phase in the alloy with 6(wt)%Mo and 6(wt)%W may be restrained by adding 2% Ru element. Compared to Ru-free alloy, the creep life of the 2% Ru single crystal alloy at 980°C200 MPa increases form 123 h to 333h. Compared to the 2% Ru alloy, the precipitated plate-like μ phase in the Ru-free alloy may promote the initiation and propagation of cracks along the γ matrix up to fracture, which is thought to be the main reason of the alloy having a lower creep resistances and shorter lifetime.     

深层优质碎屑岩储层全生命周期分析方法论

油气勘探领域的深层是指沉积盆地中埋深在3 500~4 500 m及以深的地层。在含油气盆地的深层碎屑岩储层中，优质储层是重要的勘探目标。优质储层具有大量孔隙，其形成与沙或砂岩的沉积条件、埋藏方式、区域温压场、膏盐岩效应等多种因素有关。通过系统研究全球不同区域不同时代不同类型深层碎屑岩储层，提出优质深层碎屑岩储层的全生命周期研究方法，即从储层形成演变的全部时间出发，将深部储层的形成过程划分为早期剥蚀搬运沉积阶段、中期埋藏阶段、中期或/和晚期改造阶段，从全生命周期的尺度分阶段综合分析深层碎屑岩储层的形成及演化过程，推演在地质历史时期中的优质储层演化时序及发育阶段、分布位置。     

Ahdeb油田水平井控水完井及一体化耦合模型

Ahdeb油田上部主力层系采用水平井注采井网开发，前期取得了较好开发效果，但开发过程中部分井组稳产与高含水矛盾日益突出，亟需开展水平井调流控水研究。针对Ahdeb油田这类边水或注入水在高渗层或断层裂缝带突窜引起的水平井见水，基于不同钻遇储层特征，形成了水平井控水完井分类治理方案，并建立了一套同时适用于盲筛分段组合、中心管和ICD控水完井工艺的井筒-油藏一体化耦合数值模型。该模型重点考虑了水平井筒受多种作用力下的变质量流动过程，提高了单井的模拟和实际含水率匹配度。研究表明：对于根部见水的水平井，ICD完井及中心管完井均有较好控水效果，含水率从49.8%分别下降至37.8%和35.0%。完井控水装置的限流范围应略大于出水井段，才能有效控制含水率。调流控水装置下入时机应选择在水平井见水前，能够最大程度降低整个生产过程中的含水率，从而提高单井累产油量。     

基于地质雷达与孔内摄像的爆破防漏施工方法

为了解决在裂隙溶洞岩体条件下,散装炸药由于良好的流动性,容易发生炸药泄漏,形成安全隐患并影响爆破效果的问题。结合具有典型喀斯特地貌特征的贵阳龙洞堡机场三期扩建工程中露天爆破施工的实际情况,以检测数据为基础,提出了一种适用于不良地质条件的散装炸药施工新方法。设计前,对爆区采用地质雷达进行地质检测,探测地下溶洞等不良构造,基于探测数据有针对性的进行爆破设计;使用孔内摄像技术对炮孔内部条件进行检测,从而确定可能发生炸药泄漏的位置。在施工过程中,采用分段装药、包装炸药隔离、高强度聚乙烯膜柔性隔离等技术控制炸药泄漏。在龙洞堡机场扩建工程的露天爆破中应用结果表明,合理运用该技术,可以有效避免混装炸药因泄漏而流失,从而改善裂隙岩体条件的爆破效果。     

Developing a four‐layer system rutting model in highway

Abstract

A four‐layer rutting model was developed to account for material property changes in the progression of accumulated compressive plastic strains in all roadway layers on the basis of traffic passing in this study. This paper demonstrates that incorporating the mechanistic‐empirical approach in the prediction of rutting provides value information on the contribution of each layer to rutting in flexible pavements.     

A finite deformation constitutive model for shape memory polymers based on Hencky strain

In many engineering applications, shape memory polymers (SMPs) usually undergo arbitrary thermomechanical loadings at finite deformation. Thus, development of 3D constitutive models for SMPs within the finite deformation regime has attracted a great deal of interest. In this paper, based on the classical framework of thermodynamics of irreversible processes, employing the logarithmic (or Hencky) strain as a more physical measure of strain, a 3D large-strain macromechanical model is presented. In the constitutive model development, we adopt a multiplicative decomposition of the deformation gradient into elastic and stored parts. In addition, employing the averaging scheme, the logarithmic elastic strain tensor is decomposed into the rubbery and glassy parts. The evolution equations for internal variables are introduced for both cooling and heating processes. The time-discrete form of the proposed model in the implicit form is also presented. Comparing the predicted results with experimental data reported in the literature, the model is validated. Finally, using the finite element method, two boundary value problems e.g., a 3D beam and a medical stent made of SMPs are numerically simulated.     

隧洞开挖典型掏槽设计方法

针对目前隧洞开挖爆破施工中缺少具体、详细的掏槽设计方法的现状,提出了最常用的2种典型掏槽方式,并详细论述了其设计方法。这些掏槽方式及设计方法均在实际施工中得到了推广应用,并且取得了良好的爆破效果。实际应用表明:这些典型掏槽方式及设计方法能有效提高硬质岩石开挖的钻孔利用率,能将钻孔利用率提高到98%～100%,实现掌子面基本无残孔,从而有效提高单循环进尺,加快开挖进度,降低开挖成本。     

层状岩体爆破抛掷方向对大块率的影响

层状岩体的爆破效果往往较差,易引起较高大块率。通过理论分析层状岩体软弱结构面,并结合单个爆破漏斗试验可知,结构面间粘结力、应力波振幅和入射角度是影响爆破效果的主要原因,以此为理论基础并总结前人的科研成果,建立抛掷方向和岩层走向的夹角θ与大块率的关系。     

Grain refinement in low SFE and particle-containing nickel aluminium bronze during severe plastic deformation at elevated temperatures

The influence of particle size and morphology on grain refinement in low stacking fault energy(SFE)alloys was studied by comparing the grain structures in single-and multi-phase Al-bronze(AB)alloys following equal channel angular pressing(ECAP)between 350 and 500℃.In particular,nickel aluminium bronze(NAB)was chosen as it contained both coarse and fine rounded particles,as well as a lamellar phase which evolved during ECAP.Grain refinement in the single-phase alloy was achieved through dynamic recrystallisation initiated at deformed twin boundaries.By contrast,different mechanisms were observed in the particle-containing NAB.Recrystallisation around the coarse κⅡ particles(～5 μm)was promoted through particle stimulated nucleation(PSN),whereas recrystallisation in the region of the fine κⅣ(～0.4μm)was delayed due to the activation of secondary slip.Grain refinement in areas of the lamellar κⅢ showed significant variation,depending on the lamellar orientation relative to the shear plane of ECAP.As the lamellae deformed,numerous high angle grain boundaries were generated between fragments and served as nucleation sites for recrystallisation,while PSN occurred around spheroidised lamellae.The spreading of the κⅢ particles by ECAP then enhanced the total area of recrystallised grains.