固相萃取技术在农药残留分析中的应用

固相萃取是一种新型的样品预处理技术，操作简便，节省有机溶剂，易于实现自动化操作，已广泛应用于环境保护、药物检测、食品检验检疫等领域。在农药残留分析中，固相萃取技术的应用还使得提取不同类别农药的选择性增强，样品回收率提高，尤其是结合HPLC—MS、GC-MS、CE-MS等仪器的联合鉴定，可实现自动化分析，能简单、快速、灵敏地提取定量许多物质，从而大大提高了分析效率和精密度，具有广阔的发展前景。     

De-oiling contaminated bleaching clay by high-pressure extraction

The disposal and re-use of spent bleaching clay from the vegetable oil processing industry is a problem of growing importance. Although today the only practical way of removal of the spent material is disposal, extraction with organic solvents is a well-known method of de-oiling contaminated bleaching clay. In our investigations we compare the extractibility of two different types of bleaching clays with CO₂ as a solvent. All experiments were carried out with a high-pressure extraction plant. The extraction and separation conditions, temperature and pressure, as well as the CO₂ mass flow, were varied during experiments. The aim of our investigations was a complete separation of the oil from the adsorbent. The latter should then be re-used as bleaching clay. The oil and the bleaching clay were analyzed and tested, respectively. The results show that oil of good quality can be recovered and the bleaching clay still has an activity approximately 50% of fresh clay.     

橡胶对HIPS树脂落锤指标的影响

通过对高抗冲聚苯乙烯树脂出现产品落锤指标偏低问题的分析，从橡胶配量及其粒径大小上进行了改进，同时改进了工艺操作，采取了提高反应釜搅拌速度、降低乙苯浓度等措施。结果产品合格率达到９９％以上，优级品率达到９８％以上。     

Solvent extraction of oil from soybean flour II— pilot plant and two-solvent extractions

The process of grinding soybeans to a fine flour and extracting the flour with hexane was studied on a pilot plant scale. The crude oil from the pilot plant study had 15 ppm phosphorus and was suitable for physical refining after a light acid pretreatment and bleaching. The refined oil showed a Lovibond color of 1.4 yellow and 0.3 red. The pilot plant study also showed that grinding of the soybeans and the separation of solid from miscella were the most difficult steps in solvent extraction with fine flour. A laboratory study on separation of miscella from meal by aqueous ethanol reduced the hold-up volume, but it did not remove all the miscella. A test with betacarotene showed that only the miscella outside the flour particles was displaced. Aqueous ethanol solutions used as a second solvent extracted additional nontriglyceride materials (primarily phospholipids) from the meal. Also, the free fatty acid content of the oil was increased with aqueous ethanol solution wash. The quality of the extracted crude oil was lowered by using a second solvent, but it had the advantage of needing only one centrifugation to separate miscella from meal.     

Effect of sample size on solvent extraction for detecting cocontinuity in polymer blends

The effect of sample size on the results of solvent extraction measurements for detecting cocontinuity in polymer blends was investigated. Poly(ethylene oxide)/polystyrene (PEO/PS) blend samples of several thicknesses were analyzed by removing the PEO phase using water extraction. The experimental degree of continuity was shown to have a linear dependence on the reciprocal of sample thickness. A model is proposed to explain this dependence and to allow the bulk or true degree of continuity to be determined. Measurement of the bulk degree of continuity is useful for understanding properties of cocontinuous polymer blends such as electrical conductivity, impact strength, or tensile strength.     

Alekseevskii-Tate revisited:An extension to the modified hydrodynamic theory of long rod penetration

The modified hydrodynamic theory of long rod penetration into semi-infinite targets was established independently by Alek-seevskii and Tate over forty years ago and since then many investigators contributed much to the development of the high speed penetration mechanics.However,in all the models proposed so far,the target resistance Rt is not well defined and usually determined by adjusting it until the predicted depth of penetration comes to an agreement with experimental data.In this paper,assumptions are...     

基于多特征融合的运动物体识别方法研究

为了实现运动目标的实时检测,本文基于多特征融合,提出了一种运动物体分级识别方法.首先通过对运动目标的分割,分析得到各个物体的形状矩特征、面积大小及运动速度.对上述特征,采用支持向量机方法对其矩特征进行快速的一级分类,然后对一级分类结果及各物体的面积、速度等信源根据其对分类的重要程度,采用模糊积分技术进行多特征融合分类.实验表明,本方法具有较强的学习能力及较高的识别精度,可有效地应用于道路监控等系统.     

基于KPCA和SVM的火箭发动机试验台故障诊断方法

为了解决液体火箭发动机试验台的故障诊断问题,提出了一种基于核主元分析(KPCA)特征提取和支持向量多分类机(SVM)的故障诊断方法,该方法首先利用核主元分析对试验台标准故障样本进行特征提取,通过特征分析,建立适合于试验台故障状态识别的层次多分类支持向量机,并对其进行训练,然后将试验数据在主元上投影,输入到训练好的支持向量多分类器,对试验台故障状态进行识别.该方法充分利用了核主元分析强大的非线性特征提取能力和支持向量分类机良好的小样本泛化特性,解决了试验台故障诊断中的小样本、非线性模式识别问题.对试验台的试验结果表明,该方法是有效的、可行的.     

红外与可见光复合寻的制导中的快速图像配准方法

对现有多传感器图像配准方法在红外与可见光复合寻的制导应用中存在的计算量大等不足,提出了一种基于部分Hausdorff距离的快速方法和一种两集合相似度的定义,从而实现了有效减小误匹配特征点对的红外与可见光图像快速配准方法.此算法通过分别提取两幅图像边缘上显著特征点,再根据提出的快速方法和两集合相似度定义,粗略估计出图像间的旋转角度、平移量;然后依据此估计值,缩小特征点匹配时匹配特征点搜索范围,求得一致特征点对;最后用最小二乘法求解最优变换参数.实验结果表明了该方法的有效性、快速性.     

一种基于步幅长度及频域特征的步态识别方法

步态识别作为一种较新的生物认证技术有其独特优势,它旨在根据人行进过程中的行走步态模式来识别其身份.提出一种基于步幅长度及频域特征的步态识别方法:首先采用背景减除算法实现运动人体检测,并根据步幅长度变化特征进行周期分割.然后提取步幅长度极值结合关键帧的频幅均值构成五维特征向量,最后用标准模式分类器在中科院自动化所提供的CASIA步态数据库中进行实验,在降低了算法复杂度的同时,获得了令人鼓舞的实验结果.