富集均三甲苯塔的模拟与优化

在满足工艺要求的基础上，通过富集均三甲苯塔模拟与优化给出最佳操作条件，用于指导实际操作和设备改造．优化生产参数。     

Tensile Stress Relaxation of Alumina at High Temperature

The development of a tensile testing methodology for ceramics which enables a stress vs strain-rate response to be measured at high temperature is described. The test involves a carefully controled stress relaxation test at constant total strain using an experimental procedure and phenomenological analysis previously developed for metallic materials. It is demonstrated here with preliminary tests on alumina at 1050° and 1150°C. This offers, with further development, the possibility of establishing design stresses associated with low strain-rate behavior for structural applications. The results demonstrate that data covering four decades of strain rate may be generated in tests lasting a few hours. The inelastic strain consists of substantial anelastic recoverable strain in addition to a permanent creep strain.     

COMPUTER SIMULATION OF HYDRODEMETALLATION IN FIXED-BED REACTORS

An isothermal model for hydrodemetallation (HDM) of crude oils in catalytic fixed-bed reactors is proposed. This model involves a consecutive reaction mechanism, which is capable of accounting for particle deposit profiles with interior maxima. Consistent with the fact that HDM catalysts are conglomerates formed by precipitation, the porous catalyst itself is modeled as randomly overlapping spheres of equal size. The metal is deposited as growing metal sulfide crystallites on the inner surface of the catalyst. These crystallites originate from a certain number of randomly scattered nuclei and increase in size as the deposition proceeds. The random sphere model for the catalyst and the deposit provides the changes in the catalyst pore structure—local porosity and surface area.

The mass transport within the domain of the particle is due to restricted liquid diffusion, since the diameter of the metal bearing compound (porphyrin) and the intermediate are comparable to the pore size. The diffusion restrictions taken into account are the enhanced drag imposed on a molecule by adjacent pore walls and steric partitioning.

Since the deposition process is much slower than diffusion and reaction, the pseudo-steady-state assumption can be justified. The equations of conservation for mass are solved by orthogonal collocation on finite elements. Based on this solution technique a computer simulation program of HDM is designed that allows two modes of operation: constant temperature and constant conversion. The simulation program “SIMULA” is highly flexible with regard to reaction kinetics, catalyst structure, reactor design, and operating conditions. In comparison to a base case with uniform activity, the effect of intraparticle (radial) and bed (axial) activity profiles on the conversion rate is discussed. For the case investigated, a radial distribution of activity higher at the center of the particle than at the edge can increase catalyst life by 25%, but axial distribution was less successful.     

高柔韧性聚氨酯丙烯酸酯的合成及应用

选用不同结构的多元醇作骨架，合成一系列高性能的聚氨酯丙烯酸树脂，并通过对聚氨酯丙烯酸树脂性能的对比研究，发现以聚丁二烯二元醇为骨架的聚氨酯丙烯酸酯树脂具有极佳的柔韧性和优异的低温耐曲折性。     

SIMULATION AND ESTIMATION OF LONG MEMORY CONTINUOUS TIME MODELS

Abstract. Some general properties of long memory continuous time processes are recalled or proved. Methods of simulation are studied. A comparison with the usual discrete time autoregressive fractionally integrated moving-average filter is made and illustrations are provided. Then, two methods of estimation of the parameters of such a model from a discrete sample are studied, both theoretically and empirically, with Monte Carlo experiments.     

低密度泡沫玻璃的研究与应用

低密度泡沫玻璃是利用碎玻璃制造的一种气孔率大于90%的隔热保温材料,它具有强度高、导热系数小、吸水率低、不吸湿、耐腐蚀等特性,在潮湿环境下抗冻性能好,是一种优良的低温、超低温隔热保温材料。该产品用途广泛,所用的原材料简单易得,但生产工艺过程比较复杂,生产过程控制精度要求较高,容易产生各种缺陷而影响产品的质量。本文对低密度泡沫玻璃的生产工艺过程进行详细的分析研究,提出相应的措施,确保产品的低密度和高成品率,提高产品的性能,扩大产品的使用范围。     

近十年常温干法精脱硫专利技术发展动态

收集了近十年来国内的常温干法精脱硫专利，并分类列举出各种脱硫剂的物化性质和几种常温精脱硫工艺，重点阐述了该技术的优缺点及其未来发展方向。     

High temperature polymerization of propylene catalyzed by MgCl2‐supported Ziegler–Natta catalyst with various cocatalysts

Four cocatalysts, referred to as ethylaluminoxanes, were synthesized by the reaction between triethylaluminium (AIEt₃) and water under various molar ratios of H₂O/Al at ?78°C. Aluminoxanes were used as cocatalysts for a MgCl₂‐supported Ziegler–Natta catalyst for propylene polymerization at temperatures ranging from 70 to 100°C. When the polymerization was activated by AlEt₃, the activity as well as the molecular weight and isotacticity of the resulting polymer gradually dropped as the temperature varied from 70 to 100°C. When ethylaluminoxane was employed as the cocatalyst, good activity and high molecular weight and isotacticity were obtained at 100°C. Furthermore, when the cocatalyst varied from AlEt₃ to ethylaluminoxane, the atactic fraction and polymer fraction with moderate isotacticity decreased and the high isotactic fraction slightly increased, which indicated that the variation of the cocatalyst significantly affects the isospecificity of active sites. It was suggested that the reactivity of the Al‐Et group and the size of the cocatalyst were correlated to the performance of the Ziegler–Natta catalyst at different temperatures. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1978–1982, 2006     

Effect of Twin-Plane Reentrant Edge on the Coarsening Behavior of Barium Titanate Grains

When BaTiO₃ ceramics were sintered at relatively low temperatures (≤1250°C), the grains with reentrant edges caused by a (111) double twin grew exclusively. As a result, a microstructure with a bimodal grain-size distribution composed of platelike large grains and fine matrix grains was obtained. In contrast, at the usual sintering temperature between 1250° and 1350°C, grains containing a (111) double twin did not exhibit any growth advantage. In this case, a coarse and uniform microstructure was obtained. When this coarse-grained specimen was further heat-treated at 1365°C, the grains possessing a double twin were observed to grow exclusively again. The results were explained in terms of a coarsening process controlled by two-dimensional nucleation.     

A203型低温氨合成催化剂使用小结

对Ａ２０３型低温氨合成催化剂的使用进行总结，介绍了该催化剂的装填，升温还原情况及使用效果。