Fatigue behaviour of a phenolic matrix composite

This paper presents results of a fatigue life investigations carried out in plate specimens of a fibre-glass-reinforced phenolic matrix composite. Tensile and Young's modulus data were obtained at four different testing temperatures (room temperature, 100, 150 and 200 °C). The fatigue S−N data were obtained at room temperature only and for two stress ratio values (R=0 and 0.4). Fatigue and tensile behaviour was assesesed in the composite with the fibres aligned in the longitudinal loading direction. The results were obtained for two values of volume fraction (0.28 and 0.42) and three different glass surface treatments. A detailed comparison of fatigue results is given taking into account several fatigue parameters and also the testing variables. Results of observations of SEM fracture surfaces are also presented.     

Cure reaction for modified diallylbisphenol A/diaminodiphenylsulfone/bismaleimide

The glass‐transition temperature as a function of curing conversion for a modified diallylbisphenol A/diaminodiphenylsulfone/bismaleimide (BMI) resin was investigated at different temperature regimes and modeled using a modified Di Benedetto equation. Although the relationship between the glass‐transition temperature and conversion of the BMI system conforms to the Di Benedetto equation for α < 0.6 and at lower cure temperatures, at higher cure temperatures the results deviated significantly from the equation; thus, it was an inadequate model for the system. Fourier transform IR analysis showed that the major crosslinking reactions did not occur during cure for the modified BMI at and below 150°C. However, as the cure temperature was increased, the crosslinking reactions responsible for 3‐dimensional network structures became more dominant. At 190°C the C? N? C_stretch vibration of the uncured maleimide ring converted into succinimide rings in the curing process. Simultaneously, a decrease was observed for the absorbance bands of ? C? H_bending (maleimide). The higher cure temperatures induced a significantly faster initial crosslinking rate and also resulted in a shorter period of time after which further crosslinking was retarded, because the increase in the crosslinks also physically slowed further crosslinking activity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 227–235, 2002     

片式多层电容电阻复合元件的研制

采用低温共烧陶瓷(LTCC)技术将电容、电阻元件集成在多层陶瓷基板里,构成了一种新型的片式多层复合元件,并研究了其制造工艺性能和频率特性。结果表明,片式多层电容电阻复合元件制造工艺适合批量化生产,并为片式多层LC滤波器、LTCC基板及器件的研发提供了极好的参考价值。     

波在PTL介质中传播的旅行时反演

本文对Byun(1990)的横向各向同性介质的旅行时反演方法作了两点改进:其一是根据优化后的V_r值计算一个初始的F值,然后再根据这个初始值进行最小均方误差分析;其二是对初始值进行优化分析时,提出用测量值(或由式(4)和式(10)计算的理论值)作为实际值进行拟合,而Byun的方法是用式(11)的计算来得到一个实际值。理论模型证明:本文所述方法有一个比较宽的适应性,而Byun方法只在弱各向异性时才可以得到较精确的结果。     

无约束淬火机目标温度神经网络预报

淬火、控制冷却的冷却速度和目标温度是关系到钢板性能的关键因素 ,但由于冷却过程的水量、水温、辊道速度等对冷却目标温度的影响属多变量非线性过程 ,用简单的解析模型通常精度较低 ,难以达到精确控制的要求。采用人工神经网络技术对无约束淬火机目标温度进行快速预报 ,结果表明 ,预测精度高 ,快速准确     

叠后地震剖面的线性化波阻抗反演

本文提出了由井旁道出发逐道进行的叠后地震剖面的线性化波阻抗反演方法。每一道反演采用逐次线性化对波阻抗进行修正，反演的纵向分辨率为一个采样时间间隔，并以合成记录道与实际地震道的相似系数作为迭代收敛准则，已处理的地震道波阻抗作为下一道反演初始值。实际资料处理表明，该方法具有较高的分辨率和运算速度快的优点。     

Complexity of the color appearance of objects with nonuniform illumination

An inversion relationship is clarified between lightness and brightness, and also between chroma and colorfulness under nonuniform illumination with different illuminance levels (high and low) within the same visual field. Brightness (or colorfulness) of object color with low lightness (or chroma) under high illuminance level is perceived higher than that of another object color with high lightness (or chroma) under low illuminance level. Two color images are given for showing the inversion phenomena on brightness–lightness and colorfulness–chroma between object colors under different illuminance levels. These color images are useful for making researchers on color understand the differences in concept between brightness and lightness, and also between colorfulness and chroma. In particular, the concept of colorfulness is important, but difficult to understand. © 2007 Wiley Periodicals, Inc. Col Res Appl, 32, 372–377, 2007     

济钢350m^3高炉高富氧生产技术

分析了济钢350m^3高炉高富氧对产量,理论燃烧温度,炉况顺行状况,焦比和生产效益的影响,高富氧可提高产量,但升高焦比和高炉理论燃烧温度,一定程度上影响高炉顺行,存在富氧效益最大化的适宜富氧率.高炉生产应低富氧高喷煤,根据钢目前的情况,富氧率经2%-3%为宜.     

自控温电伴热材料在仪表测量管线上的应用

文章就化工自动化仪表测量管线的伴热问题,介绍了自控温电伴热材料的特点、伴热设计、施工方案以及运行中的注意事项。     

用改进的逐次逼近解法计算二维井间电磁场

提出了一种计算积分方程的新方法——改进的逐次逼近解法 (MSAM) ,并用该方法计算了轴对称二维井间电磁场。与传统的逐次逼近解法 (SAM)相比 ,该方法收敛性强 ,应用范围广 ,可适用于高电导率对比地层。由于不必进行直接的大型矩阵求逆运算 ,因此与积分方程的直接解法 (IE)相比 ,该方法计算速度更快 ,所需内存更少。采用矩阵求逆方法计算了成层介质中的二维 Green函数 ,并对含 Green函数的积分进行了简化 ,从而加快了计算速度。数值计算结果显示 ,在地层电导率对比度达到 2个数量级时 MSAM仍收敛 ,且计算结果与直接求解积分方程的结果一致 ,因此 MSAM是一种有效的计算轴对称二维井间电磁场的方法