沈从文与服饰史研究的三重证据法

沈从文的《中国古代服饰研究》实际上已意识到服饰史料的三个种类:实物、图像、文献,惜其未能详尽其言。本文从其中分析出最适合服饰史研究的三重证据法,并结合罗兰·巴特对于服饰符号体系的三分进行了进一步阐述,参照西方服装史的研究,提出运用三重证据法研究中国服饰史的重要意义。     

浅谈外墙外保温外饰面砖施工技术

结合工程实例从粘结机理、保温层受力情况、安全系数等方面进行了讨论,初步分析了墙体外墙外保温外饰面贴砖的安全性,提出了在施工中应采取的质量控制措施。     

Analysis of factors of top coal caving in fully mechanized sublevel caving face in soft coal and control

According to the analysis of the mechanism of top coal caving, the caving condition was pointed out, and many factors of caving were also determined. Then the relationship between factors and caving was studied. Based on the above research, one effective method by using field monitoring was brought forward to determine the controlling factor. Then some related key technologies were provided, such as keeping the integrality of the top-coal, raising the horizontal resistance of supports and decreasing the real end-face distance etc.. At last one application of this method was presented, and it was proved to be an effective method.     

Breakability analysis of the elastic rock beam based on the winkler model

Based on the Winkler model, a mechanic model was established with formulas derived concerned with the deformations before and after a roof breakage at places in front of and at the back of the working face. In accordance with the theory for rock beam breakage, the beam breaking position in front of the working face is specified. In addition, the formulas were developed for the velocity of the subsidence at observatory point A in front of the working face when the coal wall serves as the coordinate center and the advance distance at time t as the dynamic coordinate. In the application of the above-mentioned achievements to the practice of Xieqiao Mine and the mines of the Eastern Panji Company of Huainan Mining（Group） Co. Ltd., the results concerned with the velocity with which the roof stratum tends to subside before and after breakage as derived from the mechanic model are well compatible to the results based on in-situ observations and measurements.     

摩擦改进剂对改善燃油经济性的影响研究

采用四球机试验,考察了钼胺化合物、二烷基二硫代氨基甲酸钼、无灰型摩擦改进剂与摩擦因数的关系以及它们之间的复配作用。结果表明：摩擦改进剂（FM）降低摩擦因数的效果与其化学结构有关;加入量提高,摩擦因数的改善效果明显;不同化学结构的摩擦改进剂复配使用,可以减低整个温度区的摩擦因数。     

环锭纺的发展潜力

目前存在3个关键因素导致环锭纺产量无法进一步提高。介绍了一些有利于未来环锭纺技术进一步发展的基本情况。详细分析了环锭纺工序中的能耗问题,这是性能能否提高的基础。环锭纺产量的提高,不仅是技术上是否可行的问题,更重要的是能够获得良好的经济效益。     

钙质砂地基中桶形基础垂直动载响应实验研究

首先进行了垂直静极限承载力实验,为确定垂直动载荷幅值的选择提供参考。然后重点针对栽荷幅值和频率的影响进行了系列的室内小模型实验,并对结果进行了分析,获得了垂直动载下桶形基础在钙质砂地基中的响应特点。     

一维声子晶体杆状结构纵向振动带隙特性

基于传递矩阵法,以一维声子晶体杆状结构纵向振动带隙特性为研究对象,应用MATLAB编程,数值模拟了A为金、铜、铝和碳,B为环氧树脂时纵向振动带隙特性,得到铜与与环氧树脂构成一维声子晶体时,形成最大振动带隙宽度3．39KHz ,其中金能够形成较多的带隙区间。数值模拟了A为铜,B为硅橡胶、有机玻璃1、有机玻璃2和塑料时,得到A为铜,B为塑料时形成最大带隙在0．51KHz -7．06KHz ,带隙宽度为6．55KHz ,这两种组合形成了最大带隙宽度。A为铜,B为有机玻璃1时形成较多的带隙结构。研究结论为一维声子晶体器件制作提供参考。     

电子战半实物仿真系统

介绍了Windows NT RTX及广播内存网在实时性方面的特点及其软硬件组成,对电子战系统的半实物仿真进行了详细综述,阐明了电子战半实物仿真系统的系统构成,并对系统的各组成部分进行了讨论。     

测定饮料中山梨酸、苯甲酸的国标法改进

本通过对高校建立一支高素质的管理队伍的紧迫性和必要性的分析,结合目前高校管理队伍中存在的问题,提出了一些切实可行的方法。