Geochemical characteristics of the Yufuin outflow plume, Beppu hydrothermal system, Japan

Thermal water at Yufuin (Kyushu Island, Japan) is tapped through about 820 shallow wells and used mainly for hot-spring bathing purposes. Chemical and isotopic data for fluids from wells and fumaroles in Yufuin and Beppu indicate that the thermal activity at Yufuin represents a dilute, westward-flowing hydrothermal outflow plume from the Beppu hydrothermal system. Two other (eastward-flowing) outflow plumes have long been recognized at Beppu, but the Yufuin outflow plume is first recognized here. The Yufuin outflow plume is apparently a mixture of two end-member fluids: (1) deep high-temperature (250–300°C) fluid from the Beppu system having high chloride concentration (1400–1600 mg/L) and a δ¹⁸O value near −6.0%, and (2) meteoric water having low chloride concentration (≤7 mg/L) and a δ¹⁸O value near −9.2%.A permeable conduit for the vertical and lateral transport of deep fluid from the Beppu system is provided by the Yufuin Fault zone, which extends westward from the southern flank of Mt. Tsurumi volcano to the town of Yufuin. Stable isotope ratios and chloride concentrations for shallow groundwaters near the eastern end of the fault, at an elevation near 700 m, are consistent with those required for the low-chloride meteoric end-member of the Yufuin thermal waters. Recharge of this meteoric water, as well as mixing with the Beppu deep fluid, may occur along the Yufuin Fault. Enthalpy-chloride relations indicate additional conductive heating of the Yufuin waters, in the amount of 350–500 kJ/kg beyond that which can be accounted for by mixing between Beppu deep fluid and meteoric water. This could be a result of conductive heating with convection to a depth of 1–2 km. Estimates of the magnitude of the heat source for the Beppu hydrothermal system should take into account the heat being discharged at Yufuin.     

[NZP]陶瓷零膨胀性能的设计

研究了「ＮＺＰ」材料的零膨胀性能，并尝试对零膨胀的「ＮＺＰ」陶瓷作了设计，从晶体结构、原子复合、各向异性、显微结构和复合材料等方面提出了设计思路。     

HCMOS器件γ辐射损伤电路分析

本文对最基本的HCMOS器件(反相器和与非门)作了γ辐射损伤实验。通过器件性能变化,分析了γ辐射对电路的作用。     

AHMED experiments on hygroscopic and inert aerosol behaviour in LWR containment conditions: experimental results

Hygroscopic NaOH, CsI, CsOH and inert Ag aerosol behaviour at different temperatures and relative humidities (RH) has been studied in a well instrumented and controlled vessel of 1.81 m³ total free volume. Homogeneous thermal-hydraulic conditions for aerosol measurement in the vessel were achieved. The aerosol number and mass concentration were measured continuously during the experiments using a Condensation Nucleus Counter and a Tapered Element Oscillating Microbalance. The particle size distribution and chemical composition in the test conditions were measured by Berner low pressure impactors. In the case of NaOH the half life of the aerosol mass concentration was more than four times longer at low RH (22%) as compared to high RH (96%). The half lives of the CsOH and CsI aerosols were only twice as long at low RH as compared to high RH. Thus at high RH (96–97%) the half lives of CsOH and CsI were twice as long as the half life for the NaOH aerosol. The faster decay of the NaOH aerosol is due to the smaller density decrease of NaOH during water condensation. CsOH particles grew rapidly to their equilibrium size at all humidities. The measured equilibrium size for CsOH aerosol agree well with the calculated particle size at different RHs. Experimental results were also compared with calculations obtained by severe accident computer codes. These calculated results will be presented in a later paper.     

蒸汽压法测定导热油热分解温度的研究

根据克拉贝龙—克劳修斯方程，建立了国内外文献未见报道的测定导热油热分解温度的试验装置和试验方法，测定了大量国内外导热油的热分解温度，数据表明该法具有准确、简单、实用、省时、省力等优点     

热分层流动计算中若干差分格式的比较

本文应用常规的守恒方程及湍流模型，对二维池内热分层流动建立了数学模型，并在Ｐａｔａｎｋａｒ的压力校正法基础上对该数学模型进行了数值计算，计算中的差分格式为乘方格式、一阶迎风、二阶迎风和ＱＵＩＣＫ。通过与实验的比较分析，建议计算应采用ＱＵＩＣＫ格式，并在进行风格独立性试验的基础上使用加密网络。     

Prediction of High-Temperature Long-Term Strength for Damaged Structures

A method is proposed for analytical estimation of the high-temperature long-term strength of structures with material discontinuities, which are stress raisers. We consider the processes involving the formation of diffusion pores. Diffusion processes in metals are strongly enhanced with increasing temperature and stresses.     

快重离子在石墨中引起表面及体径迹的STM研究

用多种快重离子辐照高定向石墨（HOPG），借助扫描隧道显微镜（STM）系统地研究了表面及体内缺陷，结果表明，离子在表面及解理面上都形成了小丘状的缺陷，且在表面较容易形成，可以用非连续损伤径迹结构来对其进行解释。     

含预制分层损伤复合材料层合板在压缩载荷下破坏过程和剩余强度的模拟

本文运用一种具有较高精度的高阶位移模式,结合特定的损伤判据和刚度折减方法,建立了一种含损伤有限元模型,并利用其对多个含预制分层损伤的复合材料层合板在压缩载荷下的破坏过程进行了数值模拟,并最终得到这些层合板的剩余强度。与实验结果的对比表明,该数值模拟方法具有较高的精度和有效性。     

Ion irradiation—induced structure damage to botanic samples using the ion transmission energy spectrum

1 INTRODUCTIONThe new aPplications of low energy heavy ion beam in irradi4ted botanical materialswere studied in recellt yeaxs. The beaminduced mutation effect on crop seeds has causedthe attention of physicist and biologists.[1l:] FOr examPle, 1ow energy ions can induceremarkable mutation to rice seeds.[3] There are many special phenomena when heavyions bombard botanic sW1e due to its special structure. Some studies showed that tllepenetration depths of some ions were far larger than t…