C pm MPPAC for manufacturing quality control applied to the precision voltage reference process

The multiprocess performance analysis chart (MPPAC) based on the process capability index C_pm, called C_pm MPPAC, is developed for analysing the manufacturing quality of a group of processes in a multiple process environment. The C_pm MPPAC conveys critical information of multiple processes regarding the departure of the process and process variability from one single chart. Existing research works on MPPAC are restricted to obtaining quality information from one single sample of each process ignoring sampling errors. The information provided from existing MPPAC charts, therefore, is unreliable and misleading and results in incorrect decisions. In this paper, we consider the natural estimator of C_pm based on multiple samples. Based on the natural estimator of C_pm, we consider the sampling errors by providing an explicit formula with the Matlab program to obtain the estimation accuracy of the C_pm. We tabulate the sampling accuracy of C_pm for sample size determination so that the engineers/practitioners can use it for their in-plant applications. An example of multiple precision voltage reference (PVR) processes is presented to illustrate the applicability of C_pm MPPAC for manufacturing quality control.     

小高跨比单层单跨实腹门式刚架平面内弹性整体稳定分析

采用精确的有限元非线性分析方法对小高跨比单层单跨实腹门式刚架的平面内弹性整体稳定性进行了大量的参数分析，指出在梁上均布荷载作用下，当柱梁高跨比小于某一数值时，一般不发生传统理论所认为的反对称失稳模式，而是以对称失稳模式为主。给出了修正的柱计算长度系数，并与规范给出的数值进行了对比，认为这种对称失稳模式更不利于门式刚架的整体稳定，应该引起足够的重视。     

Benchmarking of electricity networks: Practical problems with its use for regulation

Benchmarking is a technique derived for management purposes, intended to identify outliers in any population as possible problems for resolution. Several regulatory agencies have tried to use benchmarking to define the degree of inefficiency of regulated companies, by reference to some target or frontier. This paper identifies the main problem inherent in trying to adapt a management technique to a regulatory purpose – namely that it requires the exercise of subjective judgements. The resulting lack of predictability and objectivity is not conducive to the provision of efficient regulatory incentives.This paper explains where subjective judgement enters into regulatory applications of benchmarking, which is not always apparent. The choice of model and selection of data sets are two obvious areas, but the main problem arises over the assumption that any costs not explained by the model must be due to inefficiency. Such assumptions are simply unsupported by evidence and lead to cost targets (or cost reduction targets defined over several years) that are little better than subjective guesses. There are other, superior ways to set cost reduction targets, based on long-term trends in total factor productivity for the regulated sector, which are used in the US and in other countries. However, some regulators feel obliged to use benchmarking and the paper concludes with recommendations as to how benchmarking should support further and more objective investigations into the costs of regulated utilities.     

THE IMPORTANCE OF NEUTRAL EXAMPLES FOR LEARNING SENTIMENT

Most research on learning to identify sentiment ignores "neutral" examples, learning only from examples of significant (positive or negative) polarity. We show that it is crucial to use neutral examples in learning polarity for a variety of reasons. Learning from negative and positive examples alone will not permit accurate classification of neutral examples. Moreover, the use of neutral training examples in learning facilitates better distinction between positive and negative examples.     

On stability of second-order quasi-polynomials with a single delay

In this note the stability of a second-order quasi-polynomial with a single delay is studied. Although there is a vast literature on this problem, most available solutions are limited to some particular cases. Moreover, some published results on this subject appear to contain imprecise, or even wrong, conditions. The purpose of this note is to show that by accurate application of known theories, a complete explicit characterization of stability regions can be derived in a most general case. As a byproduct of the proposed analysis, we show that in the high-order case the quasi-polynomial is delay-independent unstable whenever its delay-free version has an odd number of unstable roots (or, equivalently, a negative static gain).     

95W-Ni-Fe 合金工艺缺陷的 SAM 和 XPS 分析

藉助扫描俄歇探针、Ｘ射线光电子谱等分析了９５Ｗ－Ｎｉ－Ｆｅ合金碳污染和氧化的本质。发现，碳污染试样中碳的化学状态主要为石墨，少量为铁或镍的有机化合物，这些物质的界面富集使材料脆化。钨合金氧化后，氧大量富集于钨／粘结相界面，使沿着该界面的断裂更容易发生。     

速溶奶粉中卵磷脂含量的测定

叙述了速溶奶粉中卵磷脂的测定方法，样品通过一系列处理后，测定其磷含量，回收率为９６％￣９８％。     

经纬仪竖盘检测新方法及综合检验仪

本文提出一种检定经纬仪竖直盘测角误差的新方法．该方法精度高，稳定性好，能直接与国家角度标准溯源．由它组成的“经纬仪综合检验仪”可以检测ＪＪＧ４１４—９４光学经纬仪检定规程中所有的项目及细分误差，其总不确定度为０．４″．被测仪器包括各种类型及精度的光学经纬仪、电子经纬仪、水准仪等．     

前向人工神经网络模型用于时间序列分析

介绍前向人工神经网络模型，并与传统的统计学线性模型进行比较。为了适应时间序列变量的特点，对逆传播模型进行了改进，并对太阳黑子活动的观察值这一典型的时间序列进行了分析，并检验了模型的预测能力，取得了较好的结果     

ZS1756振动筛动态分析

应用ＳＡＰ５Ｐ软件计算矿用振动筛前４０阶固有模态，从提高寿命观点看，第１阶，第３－４阶和第６阶模态应采取抑制措施；从队噪观点看，前６阶模态应给予注意。