城市燃气管网设计若干问题的探讨

分析了哈依燃气管道工程在施工及管理过程中存在的问题，并就如何解决这些问题提出了建议。     

计算机辅助设计中浓淡曲线的设计

本文介绍利用Super Frame软件进行色彩浓淡设计的原理、方法和步骤。据此原理和方法,使用C语言设计开发出了应用实例——折线浓淡分布曲线。     

Electrochemical impedance spectroscopy of a free-standing oxide film

The corrosion of low carbon steel in natural sea-water is characterized by the formation and growth of compact and thick layers composed of oxides, insoluble salts and organic materials. These layers are the result of corrosion processes induced by local environmental conditions, water oxygen supply; ionic species; bacteria and organic matter. The exchange of various species (ions, molecules, gas) between sea-water and the rust layers or the metal depends both on the kinetics of the Faradaic reactions of the entities with either the oxides or the metal, as well as on their transport properties through the different strata of the rust layers. In this work, an impedance study was carried out using the 4-electrodes cell arrangement with corrosion products picked up on steel sheet piling immersed for 25 years and analyzed as free standing membranes. This new approach is a good way to reach the specific transport and transfer properties of the oxide without being blurred by the metal influence. The physical model developed in this work was based on a transmission line, and accurately described the experimental diagrams. The electronic resistivity of the oxide layer, its porosity, the mean pore size and the reaction kinetics parameters could be determined from the fittings.     

Sensorless control of synchronous reluctance motors using on‐line parameter identification method not affected by position estimation accuracy

This paper presents a novel on‐line parameter identification method for sensorless control of Synchronous Reluctance Motors (SynRMs). Although conventional sensorless control methods based on mathematical models usually need some complex measurements of motor parameters in advance, the proposed identification method does not require them and can be realized on‐line. The proposed method identifies motor parameters under sensorless control, so rotor position and velocity cannot be used to identify these parameters. However, the proposed method does not need rotor position and velocity, and identified parameters are not affected by these estimation errors. The sensorless control using identified motor parameters is realized, and the effectiveness of the proposed method is verified by experimental results. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 155(3): 62–69, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20258     

A novel robust current control approach using adaptive line enhancer for three‐phase current‐source active power filter

An effective system control method is presented for applying a three‐phase current‐source PWM converter with a deadbeat controller to active power filters (APFs). In the shunt‐type configuration, the APF is controlled such that the current drawn by the APF from the utility is equal to the current harmonics and reactive current required for the load. To attain the time‐optimal response of the APF supply current, a two‐dimensional deadbeat control scheme is applied to APF current control. Furthermore, in order to cancel both the delay in the two‐dimensional deadbeat control scheme and the delay in DSP control strategy, an Adaptive Line Enhancer (ALE) is introduced in order to predict the desired value three sampling periods ahead. ALE has another function of bringing robustness to the deadbeat control system. Due to the ALE, settling time is made short in a transient state. On the other hand, total harmonic distortion (THD) of source currents can be minimized compared to the case where ideal identification of the controlled system can be made. The experimental results obtained from the DSP‐based APF are also reported. The compensating ability of this APF is very high in accuracy and responsiveness although the modulation frequency is rather low. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(1): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20014     

高职教育网上成绩考核系统的总体设计

本文对网上成绩考核系统进行了总体设计.其中,设计了校园网的网络结构模型、网上成绩考核系统的模块结构及其数据库和数据表.     

一种光时分制交换时隙分配计算算法

介绍了一种专为时分复用系统设计的时院分配计算算法。这种算法中主要用到的技术是从一个话务矩阵的各行选出一个区别代表的系统方法。对于任何话务矩阵，这种算法的分配效率都能达到１００％，所产生的模式矩阵个数最多为ｎ２－２ｎ＋２个（对于ｎ×ｎ矩阵）。     

Machining with tool–chip contact on the tool secondary rake face—Part II: analysis and discussion

The forces, chip thickness, and natural tool–chip contact length in machining with a double-rake-angled tool are predicted in Part II of the present study. It is revealed that in comparison with a single-rake-angled tool, a double-rake-angled tool increases the forces, especially the thrust force. However, the increase in chip thickness and tool–chip contact length is not significant under the input conditions specified in the present study. The effect of seven input variables of the proposed model is quantitatively investigated. The predicted variations of forces, chip thickness, and natural tool–chip contact length are in good agreement with theoretical and experimental results obtained by other researchers. The interrelationships among the resultant force, the chip thickness, and the natural tool–chip contact length are established, which provides a new and promising method to estimate the tool–chip contact length by employing the resultant force. It is demonstrated that the model can also be extended to study the problem of machining with a groove-type chip breaker tool.     

T8钢—聚有机硅氧烷仿生减粘降阻复合涂层的特性

研究了Ｔ８钢－聚有机硅氧烷仿生减粘降阻复合涂层的表面润湿性，磨料磨损性及土壤的减粘降组性能，与金属材料相比，仿生复合涂层的表面憎水性显著提高，水在其表面上的接触角达９２°；与４５钢相比，其磨料磨损的体积相对耐磨系数为６３％，降阻率达１５．２２％－－２２．２７％。     

Adhesive Contact of a Membrane with a Hemispherical Indenter: Theoretical Analysis and Model Liquid System

The axisymmetric Laplace equation is solved numerically to extract contact-angle data for a flat liquid/vapor interface contacting a submerged hemispherical solid. The liquid/vapor interface is treated as a membrane, with a membrane tension equal to the surface energy of the liquid. By measuring the vertical displacement of the membrane and the projected contact area the membrane makes with the hemisphere, the contact angle and correspondingly the driving force for motion of the contact line can be measured. We show that characteristic receding and advancing contact angles can be obtained by measuring the contact radii formed upon initial contact between the interface and hemisphere and final contact just prior to detachment of the interface, respectively. Use of the technique is illustrated with a model experiment involving the contact of an air/water interface with a poly(methyl methacrylate) surface.