AHMED experiments on hygroscopic and inert aerosol behaviour in LWR containment conditions: experimental results

Hygroscopic NaOH, CsI, CsOH and inert Ag aerosol behaviour at different temperatures and relative humidities (RH) has been studied in a well instrumented and controlled vessel of 1.81 m³ total free volume. Homogeneous thermal-hydraulic conditions for aerosol measurement in the vessel were achieved. The aerosol number and mass concentration were measured continuously during the experiments using a Condensation Nucleus Counter and a Tapered Element Oscillating Microbalance. The particle size distribution and chemical composition in the test conditions were measured by Berner low pressure impactors. In the case of NaOH the half life of the aerosol mass concentration was more than four times longer at low RH (22%) as compared to high RH (96%). The half lives of the CsOH and CsI aerosols were only twice as long at low RH as compared to high RH. Thus at high RH (96–97%) the half lives of CsOH and CsI were twice as long as the half life for the NaOH aerosol. The faster decay of the NaOH aerosol is due to the smaller density decrease of NaOH during water condensation. CsOH particles grew rapidly to their equilibrium size at all humidities. The measured equilibrium size for CsOH aerosol agree well with the calculated particle size at different RHs. Experimental results were also compared with calculations obtained by severe accident computer codes. These calculated results will be presented in a later paper.     

双弧线纠偏法的二维求解

传统使用的单弧形纠偏法难以满足高精度定向孔定向纠偏的需要。本文提出了双弧线纠偏模式，并推导了二维求解的公式。     

灰铸铁石墨形态的研究

文本研究了化学成份与冷却速度及孕育处理对灰铸铁石、墨形态的影响．并对形成的地B、C、D、E、F等六种衣铸铁石墨形态的形成条件作了讨论．     

粘土矿物对低渗透储层性质的影响——以鄂尔多斯盆地三叠系低渗透储层为例

粘土矿物是低渗砂岩储层的主要胶结物，对储层物性及开发过程中储层物性变化趋势有着重要的影响和控制作用。另外，粘土矿物也蕴含着大量沉积环境介质的物理化学信息，认识其自然规律，可以有效地指导预测有利储层，认识和改造油层。以鄂尔多斯盆地砂岩储层中的粘土矿物为研究对象，探讨分析粘土矿物对低渗储层性质的影响，该研究对含油气盆地低渗储层有效开发具有一定的参考价值。     

试谈配料方案与质量预测的优化

主要探讨了以理论推算为主，根据物料成分建立不同配比方案，再以实践累积经验为辅组建系统配料方案。此系统方案的建立，克服了烧结原料品种变换频繁带来的质量波动，稳定了混匀料和烧结矿的化学成分。     

无粘结预应力蛋形消化池的施工技术

石家庄市桥东污水处理厂有6座11500m3无粘结预应力混凝土蛋形消化池,本文介绍其非预应力钢筋、模板体系、混凝土和预应力工程等结构施工成套技术。     

冲切成槽法在薄壁砼防渗墙施工中的应用

冲切成槽法施工薄壁砼防渗墙,是一种新型防渗墙施工方法,它是利用特制的扁钻头对风化基岩或卵石层进行冲切成槽的施工方法,在工艺上有着较强的优越性.     

Al2O3在钒钛烧结矿中的行为研究

针对攀钢钒钛烧结矿Al2O3含量高的情况，在实验室对Al2O3在钒钛烧结矿中的行为进行了试验研究，结果表明，Al2O3含量增加对钒钛烧结矿的产量，质量有不利影响，钒钛烧结矿中的Al2O3主要以固溶体形式贮存于除钙钛矿外的其他矿物相，它对烧结矿的矿物组成和结构有较大的影响。     

西门子V94.3A燃机参数偏离对机组功率和效率的影响

应用小偏差原理，求得燃气轮机机组中10个主要参数(Ck，T1，ηk,ηT,ηc,εk,ξ1,ξ2,ξ3)变化对机组出力和效率的影响系数，并以西门子V94.3A燃机为实例进行讨论。     

螺纹钢牙筋长度不足的原因及解决办法

分析了影响螺纹钢牙筋长度的原因，根据铣床的工作原理，利用刀头夹持长度与凸轮工作轨面半径的几何关系，推导出计算各种不同规格螺纹钢牙筋的工艺参数，解决了螺纹钢牙筋长度不足之问题。