步进梁式炉的运动研究

对国内引进的、用于粉末冶金的步进梁式炉的运动,以图解法和解析法进行了分析,并对运动参数进行了理论推导和计算。本研究结果,对解决步进粱式炉的运动故障以及进行新型设计提供了有效的理论分析和计算依据。     

基于偏振光干涉仪的Interleaver解复用器实验研究

为实现更窄信道间隔的密集波分复用 ,提出了一种基于偏振光干涉仪的新型Interleaver解复用器 ,分析了结构组成与基本工作原理 ,对其进行了初步的测试实验 ,该器件所分开的DWDM系统两组波长功率均衡 ,隔离度分别为 1 0 6dB和 1 4 6 4dB ,- 1dB带宽分别为 0 7nm和 0 4nm。     

Simulation of the Forming Behaviour of a Boron Modified P91 Ferritic Steel

The forming behaviour at high temperature of a modified 9%Cr‐1%Mo (P91) ferritic steel containing B and Ti for elevated temperature service was investigated. The microstructure of the as‐received material is mainly martensite at room temperature, but special etching revealed prior austenite grains of about 25 μm in size. Torsion tests were conducted at temperatures in the range 850 to 1250 °C to simulate the hot rolling process under comparable conditions of temperature, strain rate and strain. The deformation data obtained from these tests were correlated with the Garofalo equation with a stress exponent of 4.6 and an activation energy of 315 kJ/mol. This equation was used to predict the formability behaviour for the rolling process and also to determine the maximum forming efficiency and stability of the steel. A temperature of 1200 °C is recommended to conduct the forming process.     

钢筋混凝土框架梁截面的优化确定

以梁的配筋和截面有效高度为优化设计变量 ,导出了 RC框架梁的优化配筋率和优化设计高度 ,并给出了各种荷载作用下 ,不同设防烈度和场地类别条件下的截面优化设计高度表达式 ,为设计人员提供了方便 .     

Cover Picture: Programmable Motion and Separation of Single Magnetic Particles on Patterned Magnetic Surfaces (Adv. Mater. 14/2005)

Structured magnetic surfaces enabling programmable motion of single micrometer‐sized magnetic particles are reported on p. 1730 by Gunnarsson and co‐workers. Patterns of thin‐film magnetic elements are tailored to form transport lines with junctions for the separation of individual particles. This method has the potential to improve and generate new applications in biotechnology. The cover shows a schematic of the transportation and separation of magnetic particles functionalized with antibodies capable of selectively capturing the corresponding analytes from a sample.     

Prediction of the twisting moment and axial force in a circular rubber cylinder for combined extension and torsion based on the logarithmic strain approach

The scope of the present work is the application of a particular class of strain energy function, based on the logarithmic strain, for the prediction of the twisting moment and axial force of a rubber circular cylinder under combined extension and torsion. The strain energy function involves four material parameters three of which are determined by fitting published experimental data from simple tensile and compression tests of natural rubber. One of the parameters of the proposed model has physical meaning, and it is equal to one ninth of the initial modulus of elasticity of the material. Hence, the number of unknown parameters is reduced to three. The logarithmic strain energy function is then applied to a combined extension and torsion problem of a rubber circular cylinder to check its performance for more complicated deformations. The results are compared with corresponding experimental and theoretical solutions available in the literature to validate the proposed model. It is found that the proposed strain energy function apart from predicting the common modes of deformations is also capable to determine more complicated types of deformation. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

T梁预制中需要注意的问题

为确保在T梁预制时 ,其内、外的质量和安全施工 ,介绍了四个需特别注意的问题。指出在T梁预制时 ,应把质量放在首位 ,进行具体、综合的分析和计算     

P–I diagram method for combined failure modes of rigid-plastic beams

Closed-form solutions of pressure-impulse (P–I) diagrams for simply supported and fully clamped rigid-plastic beams subjected to impact load are developed. Two failure categories, i.e., bending failure and shear failure, are considered and the responses of the beams are analyzed based on five transverse velocity profiles. With proper failure criteria, the critical P–I equations for bending and shear failure are derived. After the simplification of the critical P–I equations, the influences of the shear-to-bending strength ratio and the boundary conditions on the P–I diagrams are discussed. The results are compared with those based on a single-degree-of-freedom (SDOF) model. It is shown that the proposed P–I diagram method can be conveniently applied to assess beam damage extents and damage patterns. Especially, the P–I diagrams have good agreement with those based on an elastic, perfectly plastic model when severe damage occurs.     

带吊车门式刚架轻型钢结构厂房的设计与分析

以实际工程为背景，采用门式刚架轻型房屋钢结构设计规程，对带吊车门式刚架、吊车梁、抗风柱及基础的受力特点、设计方法进行分析，解决了设计中所遇到的问题。