水下封底混凝土与钢护筒粘结力试验

针对吊箱围堰施工中，混凝土与钢板间的粘结力无详实数据的现象，介绍了确定数据的实验模型、实验步骤，并分析了实验结果，以方便施工，指导施工。     

无功功率的补偿方法

介绍采用同步电动机和并联电容器进行无功补偿等常用的无功功率补偿方法，以提高用电设备的功率因数。     

PIC单片机在激光电源中的应用研究

论述了单片机控制激光电源的原理，提出了产生PWM控制的基本思想及整个控制系统的硬件组成和软件设计方法。     

方波扫描路径确定声源声功率误差特性分析

改进了矩形测量面方波扫描路径测量声功率的误差模型 ,以单极子、偶极子及四极子声源为例 ,给出了扫描方向、测量面离声源的距离及扫描线的密度的选取对理论误差的分布图形。分析结果表明 :对选定的测量面 ,在扫描线密度小的情况下 ,通过调整声源离测量面的距离 ,可以在声源近处找到一个最优点或较优点 ,使理论误差为零或很小 ;在绝大多数情况下 ,沿测量面长边扫描误差比沿短边扫描小。     

Reducing Average and Peak Test Power Through Scan Chain Modification

Parallel test application helps reduce the otherwise considerable test times in SOCs; yet its applicability is limited by average and peak power considerations. The typical test vector loading techniques result in frequent transitions in the scan chain, which in turn reflect into significant levels of circuit switching unnecessarily. Judicious utilization of logic in the scan chain can help reduce transitions while loading the test vector needed. The transitions embedded in both test stimuli and the responses are handled through scan chain modifications consisting of logic gate insertion between scan cells as well as inversion of capture paths. No performance degradation ensues as these modifications have no impact on functional execution. To reduce average and peak power, we herein propose computationally efficient schemes that identify the location and the type of logic to be inserted. The experimental results confirm the significant reductions in test power possible under the proposed scheme.     

光纤喇曼放大器的功率转换效率分析

在定义光纤喇曼放大器(FRA)功率转换效率(PCE)的基础上,考察了不同工作条件下光纤喇曼放大器的功率转换效率,分析PCE与光纤喇曼放大器的输入信号功率、输入泵浦功率和光纤长度的关系,比较了分布式与集总式FRA的功率转换效率,给出提高FRA功率转换效率的途径。     

21世纪住宅电气设计的构想

通过国内外室内电气设计标准的比较,提出了我国21世纪住宅配电设计的思路。     

提高供电质量减少高校供电能耗的措施

分析了高校现有供电网络存在的效率低、能耗大和供电质量不稳定的问题。提出了在增加投资不多的条件下，通过改变供电的运行方式既提高供电质量又减少能耗的一些方法。     

PWM整流器高功率因数的实现

论述了交流斩波电路中控制部分的工作原理，并对该电路中电抗器的取值进行了计算。采用16位80C196KC单片机能使控制电路非常简单，并容易实现高频开关器件整流器的高功率因数。     

Call Admission Policies Based on Calculated Power Control Setpoints in SIR-Based Power-Controlled DS-CDMA Cellular Networks

In this paper, we develop call admission control algorithms for SIR-based power-controlled DS-CDMA cellular networks. We consider networks that handle both voice and data services. When a new call (or a handoff call) arrives at a base station requesting for admission, our algorithms will calculate the desired power control setpoints for the new call and all existing calls. We will provide necessary and sufficient conditions under which the power control algorithm will have a feasible solution. These conditions are obtained through deriving the inverse of the matrix used in the calculation of power control setpoints. If there is no feasible solution to power control or if the desired power levels to be received at the base station for some calls are larger than the maximum allowable power limits, the admission request will be rejected. Otherwise, the admission request will be granted. When higher priority is desired for handoff calls, we will allow different thresholds (i.e., different maximum allowable power limits) for new calls and handoff calls. We will develop an adaptive algorithm that adjusts these thresholds in real-time as environment changes. The performance of our algorithms will be shown through computer simulation and compared with existing algorithms.