Visual thinking in arts education: Homage to Rudolf Arnheim.

The influence of Arnheim's work on the author's research began with an experiment on the perception of visual balance. Two later research projects emerged from the profound influence of Arnheim's stance toward creation in the visual arts as a serious, cognitive endeavor. A series of meta-analyses were first conducted to test the claim that learning in the arts transfers to nonarts cognitive domains, but little evidence was found. Past research on the transfer hypothesis was found to be lacking because of its failure to assess learning in the parent domain. Therefore, a new research project was carried out to identify kinds of learning in the parent domain of visual arts. We identified eight thinking dispositions developed in serious visual arts classes, setting the stage for more plausible transfer studies. This study demonstrates that the visual arts inculcate basic skills in perception and cognition that exist both in the arts and sciences. All of the skills the authors describe can, with some modification, be transferred to the science laboratory. As Rudolf Arnheim has taught us, visual thinking is everywhere. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Tedesko’s Philadelphia Skating Club: Refinement of an Idea

This paper presents new aspects of Anton Tedesko’s design for an important thin shell concrete roof. The study of this roof results from the examination of original engineering drawings and calculations which we present with the goal of promoting a greater understanding of the structural design of a major figure in the tradition of 20th century building.     

Ozonation of CI Reactive Black 5 using rotating packed bed and stirred tank reactor

This study investigates the ozonation of CI Reactive Black 5 (RB5) by using the rotating packed bed (RPB) and completely stirred tank reactor (CSTR) as ozone contactors. The RPB, which provides high gravitational force by adjusting the rotational speed, was employed as a novel ozone contactor. The same ozone dosage was separately introduced into either the RPB or the CSTR for the investigation, while the experimental solution was continuously circulated within the apparatus consisting of the RPB and CSTR. The decolorization and mineralization efficiencies of RB5 in the course of ozonation are compared for these two methods. Moreover, the dissolved and off‐gas ozone concentrations were simultaneously monitored for the further analysis. As a result, the ozone mass transfer rate per unit volume of the RPB was significantly higher because of its higher mass transfer coefficient and gas–liquid concentration driving force. Furthermore, ozonation kinetics was found to be independent of the gravitational magnitude of an ozone gas–liquid contactor. Therefore, the results suggest employing RPBs as ozone‐contacting devices with the advantage of volume reduction. The experimental results, which can be used for further modeling of the ozonation process in the RPB, also show the requirement of correct design for the RPB. Consequently, the present study is useful for the understanding of practical application of RPBs. Copyright © 2004 Society of Chemical Industry     

熔窑玻璃液流数值模拟的新发展

熔窑玻璃液流数值模拟的新发展赵国昌（清华大学核能技术设计研究院，１０００８４）ＮｅｗＤｅｖｅｌｏｐｍｅｎｔｏｆｔｈｅＮｕｍｅｒｉｃａｌＳｉｍｕｌａｔｉｏｎｆｏｒＦｌｏｗａｎｄＨｅａｔＴｒａｎｓｆｅｒｏｆＧｌａｓｓＭｅｌｔｉｎＴａｎｋＦｕｒｎａｃｅ￥Ｚ...     

Effect of phase transfer catalysts on the interfacial tension of water/toluene system

The effect on the interfacial tension of the water toluene system has been studied at 25 °C in the presence of four phase-transfer catalysts i.e. tricaprylmethyl ammonium chloride, hexadecyltrimethyl ammonium chloride, hex-adecytrimethyl ammonium bromide and hexadecyltributyl phosphonium bromide. The interfacial tension of aqueous phenol/resorcinol-toluene in the presence and absence of tricaprylmethyl ammonium chloride has also been reported. Attempt has been made to elucidate the change in volumetric rate of extraction with different catalysts for two phase reactions, on the basis of interfacial tension.     

通用串行总线(USB)数据传输模型

USB作为一种数据传输接口，了解它的通信传输机制是正确利用USB利用数据传输的基础，分层次结构对USB数据传输模型加以分析，可以使读者建立起USB体系结构、通信模型和总线事务的框架和概念，并最终对USB传输工作流程有一个清晰的认识。     

基于Winsock 的多线程CAMAC通信服务器软件的设计与实现

叙述了应用 Winsock技术与多线程技术实现高性能的 CAMAC通信服务器程序。介绍了整个程序的设计实现方法 ,重点介绍了网络通信服务的实现和多线程访问设备时的同步问题     

ATM协议的测试研究及其应用

协议一致性测试和互操作性测试是保证不同厂商的ＡＴＭ产品和服务实现完全的互通的重要技术手段，本文分析了ＡＴＭ协议的测试需求，提出了适合的测试结构和测试描述技术，并结合适配层协议ＣＰＡＡＬ５讨论了协议集成测试系统ＰＴＴＳ在ＡＴＭ协议测试中的应用。     

Synchronization models for multimedia presentation with user participation

This paper addresses the key issue of providingflexible multimedia presentation with user participation and suggests synchronization models that can specify the user participation during the presentation. We study models like the Petrinet-based hypertext model and the object composition Petri nets (OCPN). We suggest adynamic timed Petri nets structure that can model pre-emptions and modifications to the temporal characteristics of the net. This structure can be adopted by the OCPN to facilitate modeling of multimedia synchronization characteristics with dynamic user participation. We show that the suggested enhancements for the dynamic timed Petri nets satisfy all the properties of the Petri net theory. We use the suggested enhancements to model typical scenarios in a multimedia presentation with user inputs.     

Nucleate Pool Boiling of Pure Liquids and Binary Mixtures：PartI－Analytical Model for Boiling Heat Transfer of Pure Liquids on Smooth Tubes

ＮｕｃｌｅａｔｅＰｏｏｌＢｏｉｌｉｎｇｏｆＰｕｒｅＬｉｑｕｉｄｓａｎｄＢｉｎａｒｙＭｉｘｔｕｒｅｓ：ＰａｒｔＩ－ＡｎａｌｙｔｉｃａｌＭｏｄｅｌｆｏｒＢｏｉｌｉｎｇＨｅａｔＴｒａｎｓｆｅｒｏｆＰｕｒｅＬｉｑｕｉｄｓｏｎＳｍｏｏｔｈＴｕｂｅｓＧｕｏｑｉｎ...