Psychometric considerations in the dimensional analysis of subjective picture quality

A discussion of the factors involved in the subjective perception of television picture quality is presented. Much of the work in this field is cited, and it is concluded that future work needs to consider a broader range of variables than has been looked at so far.     

轴齿轮断齿失效分析

通过对轴齿轮断口形貌、硬度测试及金相组织等试验进行分析表明，齿根处没有进行硬化处理造成齿根处抗疲劳性能不足是导致轴齿轮疲劳断裂的主要原因，另外齿根过渡处倒角过小，且存在纵向刀痕引起了较大应力集中也是导致轴齿轮疲劳断裂的原因。     

济钢350m^3高炉高富氧生产技术

分析了济钢350m^3高炉高富氧对产量,理论燃烧温度,炉况顺行状况,焦比和生产效益的影响,高富氧可提高产量,但升高焦比和高炉理论燃烧温度,一定程度上影响高炉顺行,存在富氧效益最大化的适宜富氧率.高炉生产应低富氧高喷煤,根据钢目前的情况,富氧率经2%-3%为宜.     

天铁炼钢厂板坯漏钢原因分析及预防

针对天铁板坯连铸机一年多来发生的漏钢事故，分析了产生的原因，提出了预防改进的措施，对今后的生产有很好的指导意义。     

Assessing the performance of intumescent coatings using bench‐scaled cone calorimeter and finite difference simulations

A method was developed to assess the heat insulation performance of intumescent coatings. The method consists of temperature measurements using the bench‐scaled experimental set‐up of a cone calorimeter and finite difference simulation to calculate the effective thermal conductivity dependent on time/temperature. This simulation procedure was also adapted to the small scale test furnace, in which the standard time–temperature curve is applied to a larger sample and thus which provides results relevant for approval. Investigations on temperature and calculated effective thermal conduction were performed on intumescent coatings in both experimental set‐ups using various coating thicknesses. The results correspond to each other as well as showing the limits of transferability between both fire tests. It is shown that bench‐scaled cone calorimeter tests are a valuable tool for assessing and predicting the performance of intumescent coatings in larger tests relevant for approval. The correlation fails for processes at surface temperatures above 750°C, which are not reached in the cone calorimeter, but are attained in the small scale furnace set‐up. Copyright © 2006 John Wiley & Sons, Ltd.     

Stereo and motion correspondences using nonlinear optimization method

This paper presents a new approach for using stereo and motion correspondences to solve the problem of tracking multiple independently moving features. In this approach, quantitative relational structure (QRS) is proposed as a framework for the integration of stereo–motion correspondences. The similarity function, tightly coupled to stereo and motion cues, is constructed on QRS, and then energy function E² consisting of the similarity function is defined. The tracking problem can be converted into the maximization problem of the energy function E². The stereo and motion correspondences that maximize E² are recovered by applying an extended graduated assignment algorithm. The relaxation labeling method is also presented for the comparison with the proposed method. Experimental results are presented to illustrate the performance of the proposed method.     

A stochastic maximum principle for systems with jumps, with applications to finance

We consider a stochastic control problem with linear dynamics with jumps, convex cost criterion, and convex state constraint, in which the control enters the drift, the diffusion, and the jump coefficients. We allow these coefficients to be random, and do not impose any L^p-bounds on the control.

We obtain a stochastic maximum principle for this model that provides both necessary and sufficient conditions of optimality. This is the first version of the stochastic maximum principle that covers the consumption–investment problem in which there are jumps in the price system.     

Combined shape and sizing optimization of truss structures

 In this paper, an evolutionary optimization method is presented for weight minimum problem of a 3-dimensional truss structure in terms of nodal coordinates and element cross-sectional areas. The structure is subject to stress, local buckling and displacement constraints. Two types of design variables with different natures are optimized separately: (1) a fully stressed design (FSD) and scaling techniques are applied to sizing variables and (2) the evolutionary node shift method is applied to shape variables. Alternating procedure is utilized to couple the two types of variables and to combine the results. The optimum solution is achieved gradually from the initial configuration design. Two typical truss structures are examined to illustrate the validity of the method. Received: 22 October 2001 / Accepted: 04 June 2002 This research work is supported by the National Natural Science Foundation of China under the guarantees no. 10072050 and 10172072, respectively.     

The effect of additives on the thermal stability of poly(vinyl chloride)

The effect of a range of organic additives on the thermal stability of poly(vinyl chloride), both with and without a chloroparaffin extender, was studied using a number of experimental techniques. Of the additives used the best overall balance was provided by pentaerythritol, which increased stability when the extender was present and had no effect when it was absent. The congo red test emerged as the most suitable technique, being consistent and inexpensive and able to screen several additives simultaneously. Isothermal differential thermal analysis correlated with the congo red test but required more expensive equipment, was time-consuming and demanded good mixing of the poly(vinyl chloride) compound to give reproducible results. Thermogravimetry was not sufficiently sensitive and the heat stability test was the least useful of all.