双进双出钢球磨煤机的特性与故障处理

介绍双进双出钢球磨煤机双进双出、料位控制、辅助风系统和蒸汽惰性置换系统的特点，重点分析小齿轮断齿、大小齿轮齿面磨损点蚀严重、螺旋输煤绞笼损坏、磨煤机大瓦温度高、料位系统异常等常见故障及发生的原因，并提出相应设备和系统的改进措施。     

锅炉未焊透椭圆接管结构应力数值分析

应用有限元法对未焊透的椭圆接管结构进行了应力数值分析,并应用压力容器分析设计法,对该结构进行了疲劳分析,得出结构因未焊透缺陷导致疲劳破坏。     

石油套管的壁厚公差对承载能力的影响

石油套管的强度计算是按API标准进行的，它未能反映高强度套管和尺寸公差对抗压溃能力的影响。利用弹塑性力学理论建立理想的石油套管的抗压溃能力计算公式，并考虑套管的壁厚公差对计算公式进行修正。用该方法对受均匀载荷及非均匀载荷作用的套管进行分析，并同有限元计算结果相比，两者十分吻合，说明该方法的有效性。     

乙烯裂解炉对流段局部结构设计改进

介绍了乙烯裂解炉对流段的结构功能,各部件局部结构的改善设计。     

Metallurgical Investigation of a Prematurely Failed Concentric Reducer Tube Used in a Hot-Rolling Mill

A concentric reducer tube, which was a part of the top exit roughing hydraulic descaler in a hot strip mill failed prematurely under working pressure. A detailed metallurgical investigation comprising physical examination, optical microscopy, scanning electron microscopy, and electron probe microanalysis was carried out to find out the genesis of the failure. Physical examination revealed cracks located symmetrically around the circumference of the tube that ran along its full length, up to the weld beads at both ends. Optical microscopy of etched samples revealed a banded ferrite-pearlite structure and the existence of forging folds near the change-in-section(160° fillets). Cracks were found to initiate from these forging folds. No structural abnormalities were found in the weld beads and heat-affected zones.     

城市供水管网漏损探讨

就漏损控制这一项复杂的系统工程，详细地介绍了我国城市供水管网的漏损现状，分析了进行漏损控制产生的效益，造成漏损的主要原因及防治措施，提出漏损量的大小是衡量供水管网技术技术和运行的重要指标。     

2RE69/Zr702双金属管氨汽提塔关键部件的设计与制造

介绍了2RE69／Zr702双金属管的特殊结构、优良耐蚀性能，与管板的连接接头型式及焊接工艺、管头及液体分布器加工、装配和试验。     

Assessment of service exposed boiler tubes

Boiler tubes in power plants have finite life because of prolonged exposure to high temperature, stress and aggressive environment. Service-exposed platen superheater and reheater tubes (148,900 h) made of 2.25Cr-1 Mo steels in a 120 MW boiler of a thermal power plant were evaluated for remnant life. The investigation included hot tensile tests, hardness measurement, dimensional measurement, microscopy and creep tests. Experimentally determined yield and ultimate tensile strength, and estimated 10,000–100,000 h rupture strength in the temperature range 520–580 °C, exhibited a decreasing trend with increasing temperature. Microstructural study did not reveal any significant degradation in terms of creep cavities, cracks, graphitization, etc. Analysis of tensile and stress rupture data revealed that although there was degradation of the tubes due to prolonged service exposure in terms of the ultimate tensile strength values, stress rupture plots showed that the service exposed superheater and reheater tubes could remain in service for a length of more than 10 years at the operating hoop stress of 40 MPa/540 °C, provided no localised damage in the form of cracks or dents develop.     

联合循环余热锅炉螺旋鳍片管烟气放热系数研究

东南大学建造了1座IGCC余热锅炉鳍片管受热面流动和传热热态试验装置,并先后在其上进行了2个不同螺旋鳍片管组的传热特性研究,通过分析比较实测的烟气侧对流放热系数与无量纲准则式计算的结果,得出了完全热模拟公式更为准确的结论。