基于实验方法的硅胶圆管柔性关节静力学研究

采用两种不同材料的硅胶管和弹性骨架制作了柔性关节,对其进行静力学实验,得出了在相同气压下的弯曲角度和夹持力,并建立了柔性关节形变模型,获得了其气压下的形变特性。研究结果表明: 硅胶胶管邵氏硬度越小,其剪切弹性模量和弹性模量越小,其硅胶管制的柔性关节柔性和力学特性越好。该研究为弹性硅胶管在气动人工驱动器的应用进一步研究奠定了基础。     

管无芯弯曲中塑性变形规律的研究

通过大量管材弯曲试验,分析了沿弯曲线的切向和管壁厚方向的应力应变状态,给出弯管内、外侧管壁厚变化量和切向应变的近似计算公式。在后续试验的基础上,逐步将修正公式适用于实际生产。同时,为管材弯曲成形机理研究作了相应的基础准备工作。     

infi90控制系统在钢管加热炉上的应用

介绍了用于钢管加热炉双交叉限幅燃烧控制的ｉｎｆｉ９０控制系统的构成和通讯网络，基本控制模件ＣＬＣ０４指令回路控制器的硬件结构，软件功能等。     

用LG55冷轧管机轧制小直径不锈钢管孔型改进

介绍了ＬＧ５５冷轧管机使用Φ７～３２ｍｍ、Φ５０～３２ｍｍ孔型轧制小直径不锈钢管的工艺特点。试验表明，两种孔型可行，且Φ５７～３２ｍｍ孔型的综合使用效果更好。     

不锈钢管件无模拉伸实验研究

对不锈钢管件无模拉伸变形时壁厚变化进行了实验研究 ,分析了不锈钢管件无模拉伸时壁厚变化的影响因素及影响规律。确定了不锈钢管件无模拉伸时壁厚变化经验公式。实验结果发现 ,不锈钢管件无模拉伸时 ,壁厚变化tf/t0 与Dif/Di,D0 f/D0 ,1-RS的值成正比 ,即 :tf/t0 =k1Dif/D0 =k2 D0 f/D0 =k3 1-RS。对于薄壁不锈钢管件 (当t0 /D0 <0 1)无模拉伸时 ,k1=k2 =k3 =1。     

我国不锈钢管市场需求及国内外不锈钢管生产技术发展趋势

介绍了我国不锈钢管市场需求和预测分析,国外不锈钢管生产技术发展趋势。论述了我国不锈钢管生产存在的问题及与世界先进水平的差距。提出了我国不锈钢管技术改造的建议。     

热挤压钢管沿长度方向外径尺寸的稳定性及影响因素

总结了挤压钢管外径尺寸沿长度方向的变化规律，分析了1Cr18Ni9Ti不锈钢管外径尺寸波动的原因，提出了减少超差的改进措施。     

Review on the effect of heat exchanger tubes on flow behavior and heat/mass transfer of the bubble/slurry reactors

Bubble/Slurry bubble column reactors(BCR/SBCR) are intensively used as multiphase reactors for a wide range of application in the chemical, biochemical and petrochemical industries. Most of these applications involve complicate gas–liquid/gas–liquid–solid flow behavior and exothermic process, thus it is necessary to equip the BCR/SBCR with heat exchanger tubes to remove the heat and govern the performance of the reactor. Amounts of experimental and numerical studies have been carried out to describe the phenomena taking place in BCR/SBCRs with heat exchanger tubes. Unfortunately, little effort has been put on reviewing the experiments and simulations for examining the effect of internals on the performance and hydrodynamics of BCR/SBCR. The objective of this work is to give a state-of-the-art review of the literature on the effects of heat exchanger tubes with different types and configurations on flow behavior and heat/mass transfer, then provide adequate information and scientific basis for the design and the development of heat exchanger tubes in BCR/SBCR, ultimately provide reasonable suggestions for better comprehend the performance of different heat exchanger tubes on hydrodynamics.     

Preparation of ceramic coatings on inner surface of steel tubes using a combined technique of hot-dipping and plasma electrolytic oxidation

A new method for inner surface modification of steel tubes, named a combined technique of hot-dipping and plasma electrolytic oxidation (PEO) was proposed and demonstrated in this paper. In this work, metallurgically bonded ceramic coatings on inner surface of steel tubes were obtained using this method. In the combined process, aluminum coatings on steel were firstly prepared by the hot-dip process and then metallurgically bonded ceramic coatings were obtained on the aluminum coatings by PEO. The element distribution, phase composition and morphology of the aluminide layer and the ceramic coatings were characterized by SEM/EDX and XRD. The corrosion resistance of the ceramic coatings were also studied. The results show that, after hot-dip treatment, the coating layers consist of two layers, where Al, Fe_xAl _(1−x) were detected from external topcoat to the aluminide/steel substrate. Then after PEO process, uniform Al₂O₃ ceramic coatings have been deposited on inner surface of steel tubes. The ceramic coatings are mainly composed of -Al₂O₃ and γ-Al₂O₃ phase. The compound coatings show favorable corrosion resistance property. The investigations indicate that the combination of hot-dipping and plasma electrolytic oxidation proves a promising technique for inner surface modification of steel tubes for protective purposes.     

管模工艺的优化

管模是生产离心球墨铸铁管的模具,其毛坯的锻造成型非常困难。本文介绍了管模锻造工艺的优化过程。采用优化后的工艺,解决了管模在锻造生产中出现的各种问题,使管模的成品率大幅提高。同时也为长筒型锻件的成型提供了可靠的参考依据。