HYDRAULIC CHARACTERISTICS OF WATER-WINGS FOR THE MIDDLE-PIER OF A DISCHARGE TUNNEL

1. INTRODUCTION In the design of a discharge tunnel with high water head and large flow, it is important to study the cavitation and the energy dissipation, such as the prevention of cavitation for slots of various gates [1-4], the effects of entrained ai…     

An investigation of crack closure and the propagation of semi-elliptical fatigue cracks in Q1N (HY80) pressure vessel steel

The results of an experimental investigation of the effect of crack closure on the propagation of semi-elliptical fatigue cracks are presented. Load-shedding fatigue threshold tests were carried out at stress ratios of 0.2, 0.35, 0.5 and 0.7. Crack closure was measured at the surface and depth positions using backface strain gauges, near-tip gauges, and a clip gauge. Differences between the surface and depth growth behaviour are explained by considerations of the effects of the transition from plane stress conditions at the surface to plane strain conditions at the depth. The effects of stress ratios are attributed largely to differences in the crack opening displacement, which result in asperities coming into contact to induce roughness-induced crack closure.     

空调系统中风阀开度对声学房间噪声的影响

阐述了在一个全空气空调系统服务于多间较小面积声学房间的情况下,风阀开度对声学房间噪声的影响,并用工程实例加以说明,认为风阀开度对录音室和直播室的房间噪声影响很大.此外,对单独控制声学房间温度的几种方法和它们的优缺点也作了阐述.     

鹰嘴岩隧道软弱破碎岩体的开挖与施工

渫水皂市水利枢纽左岸上坝公路鹰嘴岩隧道围岩主要为Ⅱ、Ⅲ、Ⅳ、Ⅴ类围岩，地质条件复杂，成洞条件差。在隧道施工中，遵循“短进尺，弱爆破、少扰动、早支护”的原则，及时进行监控量测，采取有效的加固措施，取得了良好效果，确保了工程进度与安全。     

6to4与ISATAP技术相结合的IPv6网络实现

在IPv4向IPv6过渡期间,多种过渡技术可以互相支持、互相组合使用,以达到互利互助。简要介绍了其中2种隧道技术:6to4技术和ISATAP技术,提出了1种基于两者结合的新型实验网络的实现方案。具体讨论了在Linux下如何组建这种新型实验网络平台,详细阐明了如何配置IPv6主机以及双栈路由器,为IPv4过渡到IPv6提供1个可行的方案。     

隧道工程施工中应注意的问题

通过对海南省东线高速公路大茅山隧道施工的全程监理,阐明了在施工中应重点注意的几个问题,在此基础上,总结出隧道工程质量监督中必须做到的几点,以确保隧道工程施工安全及工程质量.     

Surface modification of starch nanocrystals through ring‐opening polymerization of ε‐caprolactone and investigation of their microstructures

Bionanoparticles of starch obtained by submitting native potato starch granules to acid hydrolysis conditions. The resulted starch nanoparticles were used as core or macro initiator for polymerization of ε‐caprolactone (CL). Starch nanoparticle‐g‐polycaprolactone was synthesized through ring‐opening polymerization (ROP) of CL in the presence of Sn(Oct)₂ as initiator. The detailed microstructure of the resulted copolymer was characterized with NMR spectroscopy. Thermal characteristic of the copolymer was investigated using DSC and TGA. By introducing PCL, the range of melting temperature for starch was increased and degradation of copolymer occurred in a broader region. X‐ray diffraction and TEM micrographs confirmed that there was no alteration of starch crystalline structure and morphology of nanoparticles, respectively. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Kinetics study of Ti[O(CH2)4OCHCH2]4 initiated ring‐opening polymerization of ε‐caprolactone by differential scanning calorimetry

Chemical shrinkage was used for the in situ measurement of the progressing chemical stabilization reactions and the influence of ozone during the stabilization of polyacrylonitrile. A method for evaluating the activation energy through the sensitivity temperature is presented. The calculated results show that the activation energies were 161.57 kJ/mol in air and 181.23 kJ/mol in ozone-enriched air. Therefore, the chemical reactions were postponed during stabilization in ozone-enriched air. Ozone seemed to act in three ways: first, ozone promoted the formation of the serious skin–core structure. Second, ozone accelerated the chemical reactions and shortened the stabilization time at lower heating rates. Third, ozone postponed the chemical reactions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

自制小型铺轨机具铺设隧道宽枕轨道

结合宝成复线新大滩隧道铺设J-82型预应力混凝土宽轨枕板采用的施工技术，就其机具的组成功用及施工方法作了介绍，指出了KPZ-50型铺轨机具的优点。