明渠湍流床面附近跃移层面颗粒浓度垂线分布

本文以动理学理论的Boltzmann方程为基础，考虑明渠湍流床面附近猝发喷射和清扫运动对跃移层内运动颗粒的不同作用，分析了明渠中泥沙颗粒浓度垂线分布问题，得到了适用于包括跃移层、悬移层在内的统一浓度垂线分布公式。文中着重研究了跃移层内运动颗粒的浓度垂线分布，并将本文结果与实测跃移层内浓度垂线分布及实测跃移层顶部浓度进行了对比，结果表明理论与实验两者符合较好。     

二滩水电站地下厂房洞室的施工特点

国际承包商在二滩工程中的许多施工布置和方法，施工技术和工艺、施工设备和措施很具有特色，扩展了我们的视野、丰富的我们的思路。总结其经验，可作为国内类似工程的参考。     

Time-Space Label Switching Protocol (TSL-SP)—A New Paradigm of Network Resource Assignment

In this paper we propose a new protocol called time-space label switching protocol (TSL-SP) in optical burst switching (OBS), and define the terms time-space label (TSL) and time-space routing (TSR). An important concept of response time is introduced in the time label mechanism. The TSL-SP is a new technology that can quickly and efficiently forward data with a label on the optical networks. A two-dimension label switched path (TD-LSP) can be set up, that is maintained and deleted by the TSL-SP. For clearly illuminating the operation principles of the TSL-SP, we propose a new approach of orthogonal time-space coordinates in which the vertical coordinate is the space label and the horizontal coordinate is the time label. The proposed TD-LSP can dramatically reduce the routing failure probability and greatly improve the link network efficiency compared with other signaling protocols. Moreover, we define the time-space label control plane that can achieve the higher efficiency. When the TSL-SP is applied to networks, switching performance can be improved by two orders compared to the switching performance with the conventional OBS signaling protocols. The fundamental goal of TSL-SP is to band the signaling and routing functions together closely. Also, the TSL-SP can reduce the complexity of the network, support automatic service offering, and provide traffic engineering.     

纳秒级上升时间的高压脉冲群电源

按照IEC 61000-4-4/GB 17626.4—1998的要求，首先应用PSPICE仿真确定电路中各元件的参数值，然后基于拉普拉斯变换用MATLAB求解二阶电路验证各元件参数。在此基础上研制了一台以开关电源作为高压直流电源、以氢闸流管作为主控开关的脉冲群电源。该电源体积小、重量轻、效率高、成本低廉。试验结果表明，其输出信号符合标准要求，可用于快速瞬变脉冲群抗扰度试验。     

连铸中间包内三维湍流流动的数值模拟

连铸中间包的操作条件决定了其内流动现象的复杂性，为此，本文选择两种不同的湍流模型ｋ－ε和ＬＥＳ（Ｌａｒｇｅｅｄｄｙｓｉｍｕｌａｔｉｏｎ），建立了描述连铸中间包内三维湍流流动的数学模型，并实施了数值计算和模型验证，对单流中间包内的流动现象进行了描述，考察了有，无流动控制情况下中间包内的流动特征和湍流模型的合理性，结果表明，合理的流动控制有利于中间包内非金属夹杂的上浮和吸附，用ｋ－ε模型基本上能够描述     

轴流式转轮三元粘性流动数值计算

为进一步提高轴流式转轮的设计精度与性能,采用时均Navier-Stokes控制方程,标准k-ε湍流模型及SIMPLEC算法,对一轴流定浆式水轮机转轮内三元粘性流动进行了数值模拟。提出了水力损失计算方法,获得了转轮的预测效率。分析了转轮内部流场分布规律,建立了叶片表面压力在包角范围内的变化曲线,有助于认识转轮内真实流动现象,为改善设计提供可视化数据支持。     

Simulation of swirling combustion and NO formation using a USM turbulence-chemistry model

A unified second-order moment (USM) turbulence-chemistry model is used to simulate methane-air swirling combustion and NO formation for different swirl numbers. The simulation results are compared with those using the EBU-Arrhenius (E-A) combustion model, the simplified PDF model of NO formation in turbulent flows and the corresponding experimental results. The comparison indicates that the USM model is obviously better than the E-A model and the simplified PDF model. The E-A model cannot reasonably simulate the finite-rate kinetics, while the simplified PDF model, using a product of two single-variable PDF's instead of a joint PDF, remarkably under-predicts the NO reaction rate. The USM model gives the best agreement with the experimental results. Predictions show that as the swirl number increases the total NO formation at first decreases and then increases, which is in agreement with the experimental results.     

Flow Regime Maps for Flow of Liquid Through Downcomer in a Turbulent Bed Contactor

The provision of a downcomer to classical turbulent bed Contactor (TBC) increases the gas treating capacity of the equipment. When the downcomer is provided, it is expected that all the liquid passes through the downcomer only without any liquid flow through the distributor. In the present study, the operational regime for the flow of liquid only through the downcomer is experimentally evaluated for various geometric parameters and particle characteristics. It is observed that the preferred operational regime without dumping and weeping increases with an increase in Archimedes number and downcomer diameter, and decreases with an increase in static bed height and downcomer weir height. Correlations are proposed to satisfactorily predict experimentally observed operational regime.     

泄水建筑物下游冲刷坑二维数值模拟

对巨亭水电站泄水建筑物下游局部冲刷过程进行了二维数值模拟。采用RNG k-ε湍流模型封闭N-S方程、有限体积法在计算网格上离散求解、VOF方法追踪自由水面;采用C语言编写用户自定义函数,以泥沙起动切应力作为床面泥沙起动判别标准,通过分析比较水流剪切力与泥沙起动切应力大小,用以控制冲刷坑底部边界变化;采用局部重构模型和弹簧光顺模型更新计算区域和网格质量,藉以模拟和追踪局部冲刷坑边界变化。研究表明,模拟结果与实测资料符合良好。在冲刷坑的冲刷过程中,床面剪切应力随着冲刷的进程急剧减小,湍动能随着冲刷的进程减小缓慢;床面剪切应力和湍动能沿程变化均较为剧烈,床面剪切应力沿程先增大后减小,床面湍动能则沿程减小。冲刷坑的纵向平衡形态或床面泥沙起动主要决定于床面剪切应力,床面湍动能对泥沙起动也具有重要影响。     

湍流化学反应的分形数值模拟

基于涡串唯象概念和分形理论,建立了能够表达湍流多尺度结构物理特性的分形湍流化学反应模型,针对Steckler室内燃烧过程进行了数值模拟研究.湍流流动采用浮力修正的κ-ε双方程模型来模拟,辐射由Rosseland模型描述,整个模拟过程由ANSYS-CFX10.0实现.将模拟结果与Steckler的燃烧实验数据进行对比,并与EDC燃烧模型及文献中EBU燃烧模型的模拟结果进行对比.结果表明,FM燃烧模型模拟得出的温度、速度场分布与实验数据能够较好地吻合,是一种有前途的湍流化学反应模拟方法.