Relation between microstructure, properties and spark plasma sintering (SPS) parameters of pure ultrafine WC powder

A combined experimental/numerical methodology is developed to fully consolidate pure ultrafine WC powder under a current-control mode. Three applied currents, 1900, 2100 and 2700 A, and a constant pressure of 20 MPa were employed as process conditions. The developed spark plasma sintering (SPS) finite-element model includes a moving-mesh technique to account for the contact resistance change due to sintering shrinkage and punch sliding. The effects of the heating rate on the microstructure and hardness were investigated in detail along the sample radius from both experimental and modeling points of view. The maximum hardness (2700 HV10) was achieved for a current of 1900 A at the core sample, while the maximum densification was achieved for 2100 and 2700 A. A direct relationship between the compact microstructure and both the sintering temperature and the heating rate was established.     

AgWC12C3的粉末粒度对产品密度的影响

粉末粒度对粉末制品的性能具有重要的影响,而这些影响主要通过改善材料的密度来达到。该文根据模拟粉末堆积模型,确定相对合理的粒度组成,并通过试验予以验证。     

Physical Properties Important to Electrostatic and Non electrostatic Powder Transfer Efficiency in a Tumble Drum

ABSTRACT: Popcorn was oiled and coated in a tumble drum nonelectrostatically and electrostatically with sugar, cornstarch, salt, cellulose, maltodextrin, all-purpose flour, whole-wheat flour, or soy flour. Particle size, density, flowability, and chargeability were correlated to transfer efficiency using regression analysis. Of the various methods to measure chargeability, charge-to-mass and adhesion improvement were the most significant. For nonelectrostatic coating, small, dense, free-flowing powders were most efficient. Small, free-flowing highly charging powders were most efficient for electrostatic coating. Percent improvement was the highest for the least efficient powders. The greatest benefit with electrostatic coating was for low density, highly charging powders with no effect of size.     

Effect of Hydrogen Heat Treatment on the Chemical Composition of Aluminum Nitride Powder

The effect of hydrogen heat treatment on impurity contents in aluminum nitride powder of different fineness is studied. Thermodynamic calculations are provided pointing to the possibility of forming gaseous hydrogen compounds with impurity elements. It is established that as a result of treatment the contents of impurity elements, i.e. oxygen, carbon, sulfur, are reduced by a factor of 3-13. The optimum hydrogen heat treatment regime is determined: a temperature of 1323 K and an exposure time of 30 min.     

现代超细粉碎技术在刺五加生产中的应用

阐述了现代超细粉碎技术基本原理及特点及其在刺五加生产中的应用,论述了在相同压力不同转速下和压缩空气压力以及破碎次数对粒度分布特性的影响。通过实验数据分析得出以下结论:破碎粒度随着压力的增大而减小,但当压力增大到一定值时,破碎粒度反而增大;随着转速的增大,破碎粒度变小;随着破碎次数的增加,粒度分布范围变窄,随后又变宽。     

用粉体表面改性技术制备拒水粉

拒水粉是一种新型建筑防水材料，被称之为神奇的粉末。本文就如何利用粉体表面改性技术制备拒水粉，从理论上和具体的实验方法上作了详尽的说明。     

日本α－Al_2O_3粉体进展

综述了日本近１０多年来α－Ａｌ２Ｏ３粉体的发展状况。特别介绍了日本对α－Ａｌ２Ｏ３粉体的标准化工作。这对提高电子陶瓷等产品的质量是非常重要的。     

颗粒表面改性法制备PTC粉体的研究

本文介绍了一种通过液相颗粒表面改性技术添加二次掺杂物来制备ＰＴＣ粉体的新方法。即将烧结助熔剂Ａｌ２Ｏ３，ＳｉＯ２以及受主杂质ＭｎＯ采用溶液形式，包裹在ＢａＴｉＯ３基粉体颗粒表面进行改性，由此可以得到二次掺杂物Ａｌ２Ｏ３、ＳｉＯ２和ＭｎＯ分布均匀的ＰＴＣ粉体。     

Fischer-Tropsch synthesis on Fe-Mn ultrafine catalysts

The Fischer-Tropsch (FT) synthesis on Fe-Mn ultrafine catalysts prepared by a special degradation method of Fe-Mn complexes is presented. The effects of preparation method and Mn content on the FT performance are examined and the active phases and the role of Mn are elucidated.     

50kg／m钢轨轨底缺陷的检验和分析

钢轨轨底缺陷有三种：底伤、结疤和底裂缺陷。取２０根有底缺陷５０ｋｇ／ｍＵ７１Ｍｎ钢轨做试样，通过低倍、断口、金相检验和扫描电能谱分析，详细描述了轨底缺陷的宏观和微观特征，研究出钢轨轨底缺陷出现的规律臁其产生的原因。通过对比试验，发现淄博１号保护渣有利于改善钢锭表面质量，提高钢轨一级品率。