红外辐射吸收法测量火焰温度

简述了几种温度测量的方法，介绍了红外辐射吸收法测温原理及实验装置，并对稳定的煤气火焰进行温度测量，试图在此基础上测量固体推进剂火焰的温度。     

不等厚板过渡削薄对接焊缝的超声波探伤

不等厚板经过渡削薄处理后的对接焊缝,由于厚度的不均匀,射线穿透时的衰减不一样,对射线检测带来很大的麻烦。常用的超声波探伤方法在定位和定级方面比较困难,本文给出利用现在先进的数字式超声波探伤仪进行准确探伤的方法。     

原位聚合法研制纳米胶囊相变材料

采用超声波工艺及细乳液原位聚合方法,研制了以聚苯乙烯为囊壁、正十八烷为囊芯的纳米胶囊相变材料;系统探讨了聚合反应各因素如引发剂、链转移剂、表面活性剂以及正十八烷/苯乙烯比等对乳胶粒子的形态、胶囊材料热性能的影响,对所研制的胶囊相变材料进行激光衍射粒度分析、透射电镜及差示扫描量热等表征.实验结果表明,在引发剂AIBN 0.5%(油相质量百分比,下同);链转移荆DD在T0.4%;复合乳化剂(SDS/OP10)总量2%,配比1:1及正十八烷/苯乙烯比=1:1条件下,胶囊呈球形均匀分布,聚苯乙烯囊壁能将正十八烷囊芯很好包裹住,其胶囊Z均直径124nm,相变焓可达124.4kJ·kg-1.     

成核剂对聚丙烯辐照交联行为的影响

系统研究了聚丙烯的辐照交联行为,证明加有成核剂的聚丙烯辐照稳定性好,容易制成性能优异的辐照交联聚丙烯。根据此研究结果,发明了“高性能辐照交联聚丙烯的制备”这一专利技术。此技术在化工、建筑等方面均有广泛的应用前景。     

超声波对沉淀二氧化硅的分散解聚研究

研究了超声波对沉淀二氧化硅的分散解聚效果，实验证明，当频率为40kHz，功率密度达到1．8W/cm^2时，沉淀二氧化硅浆料可以获得极佳的分解效果，二氧化硅聚集体小于77．6nm的颗粒数量达98．9％。     

微波辐射活性炭固载对甲苯磺酸催化合成乙酸异戊酯

用颗粒状活性炭固载对甲苯磺酸作催化剂，在微波辐射下合成乙酸异戊酯。实验结果显示，当微波功率为150W，催化剂用量为1．4g，n(醇)：n(酸)=1．2：1，反应时间30min，酯化率为98．0％以上。另外通过实验发现，微波辐射下其反应速率明显高于常规加热方式。     

间甲基苯甲脒盐酸盐的合成研究

间甲基苯甲脒盐酸盐是农药和医药研究领域一个十分重要的原材料和中间体。间甲基苯甲脒盐酸盐的两步合成法是先以盐酸羟胺制备间甲基苯甲脒肟再通过加氢还原即可得到。在制备间甲基苯脒肟时，单因素考察了常规热反应、微波合成法、超声波合成法对间甲基苯脒肟产率的影响。并探索了一锅法合成间甲基苯甲脒盐酸盐的可行性。所得化合物由沸点、氢谱、质谱确认。实验结果表明：三种方式合成间甲基苯甲脒肟，其产率从大到小依次为：微波合成法>超声波合成法>常规热反应。本实验采用两步法合成间甲基苯甲脒盐酸盐的总产率为58.05%，采用一锅法合成间甲基苯甲脒盐酸盐的产率为78.19%。两步法和一锅法均可用于合成间甲基苯甲脒盐酸盐。     

Antimicrobial protection of cotton and cotton/polyester fabrics by radiation and thermal treatments. I. Effect of ZnO formulation on the mechanical and dyeing properties

Cotton and cotton/polyester fabrics were treated against microbial attack by applying a formulation based essentially on ZnO under high‐energy radiation and thermal curing. To achieve the homogeneity and the reactivity of the treating formulation, a binder (Impron MTP) and a dispersing agent (Setamol WS) were used with ZnO. The antimicrobial property of the fabrics was evaluated, in terms of mechanical properties, by a soil burial test. Moreover, the effect of antimicrobial finishing on the dyeing properties in terms of color strength was investigated. It was found that the best composition that affords the best antimicrobial protection to cotton fabrics contains 2% ZnO, 2% binder, and 1% dispersing agents. For the cotton/polyester blend, the best results were achieved at the same conditions except the ZnO was 1%. It was found that the treatment under the effect of electron‐beam irradiation is better than that of gamma irradiation and thermal curing. The results showed that when the finishing process was carried out before dyeing with a reactive dye, it affects the color strength rather than performing the finishing after the dyeing process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1129–1137, 2003     

Dis-Bond Detection and the Possibility of Interfacial Stiffness Measurement with Real-Time Impulsive Stimulated Thermal Scattering

We describe a new, real-time, noninvasive method for dis-bond (delamination) detection which is based on a technique known as impulsive stimulated thermal scattering (ISTS). We first explain the ISTS technique and compare data from polyimide films tightly bound to silicon substrates with data from unsupported polyimide films. The observed differences in the data from these two cases are readily understandable and offer an unmistakable signature for delaminations. We demonstrate ISTS dis-bond detection by locating and mapping out randomly-distributed and spatially-fine regions of delamination in a polyimide film-silicon substrate system. Finally, we present two simple physical models of the interfacial region which comprehensively describe acoustic data from the tightly-bound and the unsupported samples. With insight from simulations using these models, we suggest how ISTS might be used to determine interfacial adhesion quality and we show how ISTS sensitivity to interfacial effects can be adjusted.     

Long-term weathering behavior of UV-curable clearcoats: Depth profiling of photooxidation,UVA, and HALS distributions

The long-term weathering performance of two UV-curable clearcoat systems was studied using in-plane microtomy in combination with infrared spectroscopy, UV spectroscopy, and ESR spectroscopy. Oxygen transport characteristics were also studied using the half-time method. The photooxidation versus depth profile was highly dependant on the presence of hindered amine light stabilizers (HALS) for both coating systems. Ultraviolet light absorbers (UVA) had little effect on the photooxidation profile. A photooxidation gradient was formed in both clearcoats due to a reduction in oxygen solubility when compared to standard thermoset clearcoats. This gradient was only seen in formulations not containing HALS. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, on October 27–29, 2004, in Chicago, IL.