机器鱼在线功率检测系统设计与实现

水下仿生机器鱼由于其高效而灵活的水下运动而受到广泛关注.至今,人们对于水下机器人的研究主要集中在运动仿生以及动力学机理解释等方面,对于机器鱼的运动中的实时功率消耗研究还几乎空白.其中一个主要原因是水下机器人的功率消耗不能直接实时获得,因而提出了一个实时在线高速功率测量系统,通过该系统能够实现5000S/s的采样速率,获得精确的机器鱼在水中运动下的实时功率,从而为后期提高机器鱼游动效率的研究做基础铺垫.一系列实验证明了其对水下机器人的实时效率检测的有效性.此外,实现对机器鱼的功耗评估能够更好地为设计节能型水下航行器提供有力的指南.     

UWSNs中基于压缩感知的移动数据收集方案

由于水下无线传感器网络(UWSNs)工作环境的特殊性,降低节点能耗和保证数据收集的实时性是至关重要的问题.提出一种基于压缩感知(CS)的移动数据收集方案.以DEBUC协议和CS理论为基础,簇内节点依据设计的稀疏测量矩阵决定是否参与压缩采样,并将获得的测量值传输至簇头.通过AUV的移动来收集各个簇头上的数据到数据中心,该问题被建模为带有邻域的旅行商问题,并提出了近似算法进行求解.在数据中心处利用CS重构算法进行数据重构.仿真实验结果表明:相比于已有的水下移动数据收集算法,该方案在保证数据收集可靠性的同时,降低了数据收集延时,延长了网络寿命.     

Fast fractal prediction of surge over underwater vehicle

In order to realize accurate control of underwater vehicles, this paper proposed a fractal prediction model of surge. Firstly, we introduce the current state-of-the-art of fractal prediction; secondly, we complete a fractal analysis with the R_S method, calculating the fractal dimension of surge using the short-time dimension method; thirdly, we correct the vertical scaling factor of the Iterated Function System (IFS) using the fractal dimension. Then the predictive value can be calculated through anti-iteration according to the statistical significantly IFS and proposing a fractal prediction model. Finally, we complete a simulation analysis based on the actual data and a comparison to another prediction algorithm. The result shows that the fractal prediction algorithm of this article has better comprehensive performance.     

Buoyancy engine developed for underwater gliders

A buoyancy engine with a swashplate-type axial piston pump was developed. Its oil extrusion and drawing properties under high hydraulic pressure were evaluated. This buoyancy engine is now installed in an underwater glider that will achieve long-term monitoring of ocean environments up to 2100 m depth in a designated area with lower operational costs. This bidirectionally functioning pump can control the amount of oil in extrusion and draw operations. When drawing oil under high pressure, the hydraulic pump and the electric motor, respectively, act as a hydraulic motor and an electric generator. The generated electric power is absorbed by a damping resistor. The oil-drawing and extrusion properties were measured using a large hyperbaric chamber that is able to produce an almost identical environment to that of actual operations. Results confirmed stable oil extrusion operations up to 21 MPa. Regarding oil-drawing properties, although it was measured only up to 10 MPa in the hyperbaric chamber, it can be inferred that the system can draw the oil and can control the buoyancy precisely up to 21 MPa by replacing the two-way ball valve with an electromagnetic latching solenoid valve.     

Development of a stable localized visual inspection system for underwater structures

To avert potential crisis from Japan’s aging infrastructure and declining birth rate, the Japanese Government is planning to introduce robotic technology for the inspection of social infrastructure (such as pipes, dams, and bridges). Recording underwater positions is a difficult task for human divers who undertake conventional dam inspections. This study presents the Anchor Diver 5.2 system for efficient and effectual dam inspection. Anchor Diver 5.2 is based on an extended-tether-maneuvered remotely operated vehicle (ROV) equipped with cameras. The ROV is lowered into water by a hoist system from a boat and implements a visual survey of the concrete underwater structure. To improve the visibility of the ROV in murky and cloudy water, a novel concept named Water Loupe is proposed. In addition, a simple boat-fixing method is proposed to provide a stable base on the water surface, and the underwater position of the ROV, which cannot be accessed by global positioning systems, is recorded using a feasible localization method. Finally, the developed system was evaluated in field experiments conducted in the Amagase Dam, Japan, and its merits and problems are discussed.     

基于OFDM的水声通信算法

在水声通信领域,基于正交频分复用（Orthogonal Frequency Division Multiplexing,OFDM）的通信技术是最直接和最有效的手段之一. 但是水声通信信道是多变的和复杂的,在传输的过程中可能会受到多途扩展严重、可用带宽有限和高噪声等不理想因素的影响,导致无法恢复出原始数据,所以保证数据的可靠性传输是极其重要的. 本文在原有的OFDM通信基础上加入了交织技术、chirp扩频技术、加窗以及chirp同步技术,并通过对MATLAB的仿真和实验分析,验证了该系统的可行性,最后通过对比加入噪声、多径和多普勒效应的误码率曲线图,说明了该系统的性能和抗干扰能力.     

水下图像增强和复原方法研究进展

目的 近年来随着水下图像/视频在海洋军事、海洋环境保护和海洋工程等科研和工业领域扮演越来越重要的角色,水下图像增强和复原作为关键技术之一,越来越多地成为研究的热点和难点问题。目前有关水下图像增强和复原方法研究进展的综述论文在国内外相对较少,为使即将进入该研究领域的学者比较全面地了解该领域的研究现状,促进该领域的快速发展,本文对其系统综述。方法 在广泛调研大量文献的基础上,按照是否基于物理模型对已有方法进行分类讨论,对其基本思想、方法特点、实验方法进行归纳和总结,其中对典型的方法进行具体介绍和分析。同时,介绍了水下图像质量的评测体系,针对典型方法的处理结果进行定性和定量的评测。进而,总结该研究领域目前存在的不足,展望未来可能的发展方向。结果 总结了水下图像退化的原因、水下图像增强和复原所采用的主要技术和方法、水下图像质量评测体系的发展历程,给出了亟待解决的问题,展望了未来的发展方向。结论 作为新兴的研究领域,水下图像增强和复原在工业界和学术界都具有广阔的应用前景和研究价值,但针对目前存在的一些局限性还需要进一步深入研究。     

基于跳频和同步捕获技术的水下无线通信技术研究

本文所阐述的水下无线技术即基于跳频技术和同步捕获技术的水声通信,由于声波在海水中的传播特性显著优越于电磁波和可见光,使得水声技术成为海洋高技术的主要研究领域之一 ,在国防领域也具有十分重要的研究意义.本文主要论述了水声通信中跳频技术和同步捕获技术的原理、具体算法的实现方案以及部分硬件设施的使用简述,并通过展示实验结果验证算法的可行性.     

能耗最优的水下滑翔机采样路径规划

研究了以能耗为优化准则的水下滑翔机海洋环境参数采样路径规划方法.首先,根据水下滑翔机的运动特点,建立了水下滑翔机采样作业过程的能耗模型;其次,基于能耗模型提出了一种能耗最小的滑翔运动参数优化方法,该方法避免了求解复杂的混合整数非线性规划问题;之后,在能耗最优的滑翔运动参数优化基础上,提出了一种基于两步链式Lin-Ker...     

无人水下潜器回收过程中光学引导模式的研究

国际上,包括美国和法国等先进的西方国家都正在进行水下无人潜器UUV（Unmanned Underwater Vehicle）回收技术的研究．国内,哈尔滨工程大学的一个科研小组在这个领域 也正在开展一些探索性的研究,本文介绍了这个小组在光学引导方面最新的研究结果,主要 包括(UUV)回收过程的光学引导模式的模型和算法研究．本文研究出的模型比较精确,算法 对图片分析的精度较高,这有利于得到高精度的引导信息．