Poly(trimethylene terephthalate) nanocomposite fibers comprising different organoclays: Thermomechanical properties and morphology

Poly(trimethylene terephthalate) (PTT) nano composites were synthesized by in situ polymerization at high temperature with two thermally stable organoclays: 1,2‐dimethylhexadecylimidazolium‐montmorillonite (IMD‐MMT) and dodecyltriphenyl phosphonium‐MMT (C₁₂PPh‐MMT). PTT hybrid fibers with various organoclay contents were melt‐spun at various draw ratios (DRs) to produce monofilaments. The thermomechanical properties and morphologies of the PTT hybrid fibers were characterized using differential scanning calorimetry, thermogravimetric analysis, wide‐angle X‐ray diffraction, electron microscopy, and mechanical tensile properties analysis. The nanostructure of the hybrid fibers was observed by both scanning and transmission electron microscopy, which showed that the clay layers were well dispersed into the matrix polymer, although some clusters or agglomerated particles were also detected. Unlike the hybrids containing IMD‐MMT, the clay layers of the C₁₂PPh‐MMT hybrid fiber were more dispersed into the matrix polymer. The thermal stability and tensile properties of the hybrid fibers increased with increasing clay content for DR = 1. However, as DR increased from 1 to 9 the ultimate strength and initial modulus of the hybrid fibers with IMD‐MMT increased slightly whereas those of C₁₂PPh‐MMT hybrid fibers decreased slightly. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4535–4545, 2006     

双环戊二烯改性不饱和聚酯树脂研究进展

较详细地介绍了双环戊二烯改性不饱和聚酯树脂的机理、合成路线(初始法、半酯化法、酸酐法、后期法、封端法和水解法)及国内外双环戊二烯改性不饱和聚酯树脂在气干性、低苯乙烯挥发、低收缩性与力学性能方面的研究进展,提出了今后的研究方向。     

TCS技术12头纺生产涤纶FDY工艺探讨

采用热管纺丝 (TCS)技术 12头纺生产涤纶FDY ,替代传统的热导丝辊式生产涤纶FDY的模式 ,具有短流程、低能耗、易维修、少投入、高效益等特点。本文对采用TCS技术 12头纺生产 76dtex 2 4f涤纶FDY的纺丝工艺 ,及它们对生产、产品质量的影响进行了探讨。纺丝速度为 480 0m min ,热管温度控制在 170～ 175℃时 ,产品质量良好     

超厚膜聚氨酯涂料的研究与应用

介绍超厚膜聚酯型聚氨酯涂料的合成工艺，讨论了聚酯多元醇结构，分子量，－ＮＣＯ含量及引入的聚碳化二亚胺结构对涂料性能影响。     

Improving oxygen barrier properties of poly(ethylene terephthalate) by incorporating isophthalate. I. Effect of orientation

The present study examined poly(ethylene terephthalate) (PET) and a series of statistical and blocky copolymers in which up to 30% of the terephthalate was replaced with isophthalate by copolymerization and melt blending, respectively. Some level of transesterification during processing of melt blends resulted in blocky copolymers, as confirmed by NMR. Random and blocky copolymers exhibited similar properties in the glassy state, including a single glass transition, due to miscibility of the blocks. However, random copolymerization effectively retarded cold‐crystallization from the glass whereas blocky copolymers readily cold‐crystallized to a crystallinity level close to that of PET. The polymers were oriented at four temperatures in the vicinity of the T_g and characterized by oxygen transport, wide‐angle X‐ray diffraction, positron annihilation lifetime spectroscopy, and infrared spectroscopy. Orientation of all the copolymers resulted in property changes consistent with strain‐induced crystallization. However, blocky copolymers oriented more easily than random copolymers of the same composition and after orientation exhibited slightly lower oxygen permeability, higher density, and higher fraction trans conformers. Analysis of oxygen solubility based on free volume concepts led to a two‐phase model from which the amount of crystallinity and the amorphous phase density were extracted. Dedensification of the amorphous phase correlated with the draw temperature. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1615–1628, 2005     

Impregnation of silk sericin into polyester fibers using supercritical carbon dioxide

Silk sericin was impregnated into polyester fabric using supercritical carbon dioxide (SCCO₂) to overcome polyester hydrophobicity. The effects of sericin molecular weight, pH of sericin, solution and cosolvent types on sericin impregnation were investigated. Enzyme‐hydrolyzed, acid‐, based‐hydrolyzed sericin in SCCO₂, and a 30 kDa sericin in SCCO₂ modified with cosolvents such as water, methanol, 1‐propanol, and acetone; and a modifier: sodium hydroxide solution were used in this work. Impregnation of sericin in polyester was indicated by Fourier transform infrared spectrophotometry (FTIR) and dyeing with acid dye. Degradation of polyester fibers during SCCO₂ process was indicated by scanning electron microscopy (SEM). Methylene blue dyeing was used to realize carboxyl group in polyester. The results showed no impregnation of sericin into polyester by using SCCO₂ modified with cosolvents. However, sericin was impregnated into modified surface polyester since hydrophilic groups such as carboxyl and hydroxyl groups were regenerated by alkaline hydrolysis. Samples impregnated with hydrolyzed sericin showed high color strength of Supranolechtbordeaux B acid dye. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

白色纯聚酯粉末涂料的性能研究

简要介绍了粉末涂料的特点 ,并从涂膜性能的优化角度论述了粉末涂料原料的选择和使用情况。从羧基聚酯树脂 -TGIC体系纯聚酯粉末涂料配方设计入手 ,研究了基料、填料、助剂对其涂膜性能 (主要物理机械性能 :涂膜之耐冲击力、柔韧性、倾斜流动性、硬度、附着力、抗UV老化等 )的影响 ,得到了一个在给出原料中涂膜综合性能最好的配比     

FTIR光谱法原位快速跟踪不饱和聚酯树脂的固化反应

用富里哀变换红外光谱法原位跟踪不饱和聚酯树脂固化反应的动态过程。该方法能直接反映分子结构的变化,迅速准确地采集数据,尤其适用于快速反应体系。     

活性端基聚氨酯橡胶改性不饱和聚酯树脂的研究(Ⅱ)

通过在不饱和聚酯树脂中加入活性端基聚氨酯橡胶来降低树脂的体积收缩.树脂固化前,橡胶与不饱和聚酯树脂相溶性好;树脂固化时橡胶中的不饱和双键反应可参与反应,并呈一定粒径的胶粒析出.本文研究了几种活性端基聚氨酯橡胶对不饱和聚酯树脂收缩控制的影响.     

气干型不饱和聚酯树脂

气干型不饱和聚酯树脂是常温交联的热固性树脂。其性能优良，光泽度高，丰满度好，是优良的饰面材料。它的组成的原子灰，是理想的更新换代产品，广泛适合于金属基材的嵌填。