聚酯装置增容能力的分析探讨

介绍了仪征化纤 6万吨 /年聚酯装置 ,在不增加设备投入的前提下 ,仅通过对酯化段和缩聚段部分工艺参数的优化调整 ,从而达到提高装置产能的目的。并分析装置增容过程中出现的问题 ,提出解决方案 ,为同类装置的增容提供借鉴     

Toughened electrospun nanofibers from crosslinked elastomer‐thermoplastic blends

A crosslink‐able elastomeric polyester urethane (PEU) was blended with a thermoplastic, polyacrylonitrile (PAN), and electrospun into nanofibers. The effects of the PEU/PAN ratio and the crosslinking reaction on the morphology and the tensile properties of the as‐spun fiber mats were investigated. With the same overall polymer concentration (9 wt %), the nanofiber containing higher composition of PEU shows a slight decrease in the average fiber diameter, but the tensile strength, the elongation at break and tensile modulus of the nanofiber mats are all improved. These tensile properties are further enhanced by slight crosslinking of the PEU component within the nanofibers. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

超支化聚酯的合成及光固化性能研究

通过甲基四氢苯酐和环氧丙醇的开环聚合反应，一步法制备超支化聚酯，聚酯的数均摩尔质量为1450～2600g／mol，支化度在0．41～0．71之间。用甲基丙烯酸缩水甘油酯改性，合成了UV固化超支化聚酯，并对其光固化性能进行了初步研究，发现超支化聚酯能有效降低固化膜的线收缩率，聚酯的官能度越高，固化膜的硬度越大，固化速度越快，在约1s的固化时问内凝胶率超过75％。     

不饱和聚酯片状模塑料力学性能的研究

研究了玻纤布、短切玻纤及碳酸钙对不饱和聚酯片状模塑料力学性能的影响,实验发现:玻纤布增强不饱和聚酯片状模塑料的力学性能比短切玻纤好,随着玻纤含量的增加,不饱和聚酯片状模塑料的拉伸强度先增加,达到一极大值之后减少。碳酸钙填充不饱和聚酯片状模塑料,随着碳酸钙含量的增加,不饱和聚酯片状模塑料的拉伸强度明显降低,弯曲强度增加。     

聚酯下脚料生产对苯二甲酸型不饱和聚酯的研究

研究了利用聚酯下脚料生产对苯二甲酸型不饱和聚酯树脂的方法。分析了原料配比及工艺参数对产品性能的影响,将对苯二甲酸型不饱和聚酯的性能与邻苯二甲酸型不饱和聚酯及间苯二甲酸型聚酯的性能进行了比较。结论认为对苯二甲酸型不饱和聚酯树脂是一种性能良好的耐腐蚀树脂。     

Toughening of vinylester–urethane hybrid resins through functionalized polymers

Liquid nitrile rubber, hyperbranched polyester, and core/shell rubber particles of various functionality, namely, vinyl, carboxyl, and epoxy, were added up to 20 wt % to a bisphenol‐A‐based vinylester–urethane hybrid (VEUH) resin to improve its toughness. The toughness was characterized by the fracture toughness (K_c) and energy (G_c) determined on compact tensile (CT) specimens at ambient temperature. Toughness improvement in VEUH was mostly achieved when the modifiers reacted with the secondary hydroxyl groups of the bismethacryloxy vinyl ester resin and with the isocyanate of the polyisocyanate compound, instead of participating in the free‐radical crosslinking via styrene copolymerization. Thus, incorporation of carboxyl‐terminated liquid nitrile rubber (CTBN) yielded the highest toughness upgrade with at least a 20 wt % modifier content. It was, however, accompanied by a reduction in both the stiffness and glass transition temperature (T_g) of the VEUH resin. Albeit functionalized (epoxy and vinyl, respectively) hyperbranched polymers were less efficient toughness modifiers than was CTBN, they showed no adverse effect on the stiffness and T_g. Use of core/shell modifiers did not result in toughness improvement. The above changes in the toughness response were traced to the morphology assessed by dynamic mechanical thermal analysis (DMTA) and fractographic inspection of the fracture surface of broken CT specimens. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 672–680, 2002; DOI 10.1002/app.10392     

超支化聚合物

综述了超支化聚合物的发展历史和最新发展趋势。介绍了超支化聚合物与一般线形聚合物比较所具有的独特性能,各个组分对于超支化聚合物性能的影响以及超支化聚合物在各个领域的应用。     

聚酯装置热媒系统串级使用节能改造

现有部分聚酯车间设计和建设时间较早,装置能耗较高,为了节能降耗,对现有热媒系统进行改造,一是将装置高温回油梯级使用到低温系统;二是改造部分热媒系统为串级使用,停开或降低热媒泵电耗。经过以上一系列改造和优化,有效提高了热能使用效率,减少了装置耗电,从而实现了热媒系统的节能降耗。     

原位聚合法纳米材料改性不饱和聚酯树脂研究

利用原位聚合法将nm SiO2预先分散到生产不饱和聚酯树脂的原料体系中,通过改进树脂生产工艺,可直接制得纳米改性不饱和聚酯树脂,并使树脂固化后的强度、韧性、耐热性等性能得到较大幅度的提高,并对其改性机理作了初步的探讨。     

Retardation of volatile aldehyde formation in the exhaust of frying oil by heating under low oxygen atmospheres

Volatile aldehydes were generated in the exhaust of high-oleic safflower oil during heating at 180°C by spraying water into atmospheres with four levels of oxygen concentrations (2, 4, 10, and 20%). These aldehydes were quantitatively analyzed by HPLC after the conversion to 2,4-dinitrophenyl hydrazones. Ten alkanals (C₂ through C₁₀), eight 2-alkenals (C₃ through C₁₀) and three 2,4-alkadienals (C₇, C₉, and C₁₀) were found. These aldehyde levels were found to be positively correlated with both the heating time and the atmospheric oxygen concentration. The total amounts of aldehydes were the lowest in the oil heated in an atmosphere with 2% O₂, and corresponded to 1/10 of those in the atmosphere with 20% O₂. Acrolein was not found in oils heated in the atmosphere with 2% oxygen. These results suggest that frying in atmospheres with low oxygen levels can effectively decrease the generation of volatile aldehydes in the exhaust.