Investigation on film cooling characteristics from a row of converging slot-holes on flat plate

Experimental and numerical researches were conducted to investigate the cooling performance of a single row of consoles (converging slot-hole) on a large-scale flat-plate model. The results show that the coolant flow from a row of consoles shows good lateral uniformity of adiabatic effectiveness, with regions of slightly enhanced cooling occurring between the consoles. For the console cooling geometry, the interaction between coolant jet from inclined console and the mainstream flow results in reasonable vo...     

高速钢表面PN＋PVD复合处理工艺和性能研究

采用多弧离子镀设备,在高速钢W18Cr4V上先进行等离子氮化,再沉积TiN薄膜,研究了不同渗氮温度和时间对PN＋TiN薄膜组织和性能的影响。结果表明,温度为500℃左右和时间为2h以上条件下对W18Cr4V进行渗氮处理后再沉积TiN薄膜,可以得到最佳的薄膜表面显微硬度（1800～2000HV0.05）和膜／基结合力（50N）,涂层耐磨性也得到明显提高。     

色谱顶空法测活度系数及对三元极性体系液液平衡预测

用气相色谱顶空分析法测定 18组部分互溶三元极性体系在完全互溶区的 3个组分活度系数 ,由此拟合出 U NIQU AC过量自由焓模型参数 ,再用 U NIQUAC方程预测液液平衡。这一方法曾很好地用在水-正烷烃 -醇体系。将此法拓展到含醇、酮、酯 ,醚、卤烷烃和水等多种极性组分的三元体系液液平衡的预测 ,其结果与文献的液液平衡数据比较 ,平均均方根误差 1.4 1% ,表明本法对含极性组分的体系仍然可行     

Loss of Curing Agent During Thin Film (Droplet) Curing of Thermoset Material

Recently, it has been reported by our group and others^1.2 that loss of curing agent is encountered during the curing of small droplets or thin films of amine cured epoxies. In our earlier study³ results were reported on loss of curing agent in small droplets used in conducting the rnicrobond, single fiber test for determination of interfacial shear strength (ISS). It was reported that use of a volatile curing agent (meta-phenylene diamine (m-PDA) with DGEBA resin) resulted in increasing amounts of curing agent being lost (as measured by T₈ of the cured droplets) with decreasing droplet size during the processing procedure. Droplets smaller than 150 micrometers were seen to lose up to 40% of the curing agent leading to alteration of the mechanical properties of the droplet and, therefore, causing measured values of ISS to be exceedingly low. Use of a less volatile curing agent (Jeffamine 700, a polyether diamine, Texaco Specialty Chemicals) in combination with DGEBA resin produced results which indicated that loss of curing agent was not occuring. This study was undertaken to show the relationships between film (or droplet) size and the amount of curing agent lost (during the processing) for three different aminecured epoxy systems.     

“准老年”高技能人才资源开发的途径

随着经济的高速发展和产业结构调整的加快,我国对中高级人才的需求日趋旺盛,许多地方和行业出现了中高级人才荒。探讨“准老年”高技能人才资源对人力资源配置和社会养老保障的意义,“准老年”高技能人才资源具有可开发性,提出利用社会组织、网络平台、专家协会和老年教育等途径。     

多孔薄壁扁管连续挤压模的研制

介绍了连续挤压模的生产工艺过程 ,模具主要结构及设计参数 ,分析了生产中存在的问题以及采取的措施 ,充分发挥了连续挤压设备的潜力 ,扩大了产品品种     

遵化市水资源状况及其开发利用分析

通过分析遵化市水资源及开发利用现状,评价了水资源现状存在问题,结合社会经济发展方向,提出了合理建议。     

红外瓦斯传感器检测中噪声点研究

针对红外瓦斯传感器检测瓦斯浓度时易受到温度、压力等物理环境的影响而存在检测浓度值不准确的问题,提出一种结合分化距离与K-means算法方法找出瓦斯浓度数据集中的噪声点.该方法混合了分化距离和K-means算法的优点.对实验设计的传感器采集的瓦斯浓度数据集进行距离分化;运用K-means算法与孤立度系数结合法找出采集数据集中的噪声点并直接丢弃噪声点;通过均值法计算瓦斯浓度.实验结果表明:测量误差小于1％,精度高.     

基于Logistic混沌系统的图像加密算法研究

给出了一种基于Logistic混沌系统的快速数字图像加密算法.首先通过给定的密钥序列生成混沌系统的初值,由此初值生成混沌矩阵;然后利用此混沌矩阵与原图像进行按位异或运算得到中间过渡图像;最后再对中间过渡图像作混沌置乱运算和混沌块置乱操作.该算法的优点是不论融合还是置乱均是利用混沌序列进行操作.实验数据表明,该算法简单易行,加密与恢复效果良好,具有较好的安全性.     

基于相关系数的决策树优化算法

通过分析ID3算法的基本原理及其多值偏向问题,提出了一种基于相关系数的决策树优化算法。首先通过引进相关系数对ID3算法进行改进,从而克服其多值偏向问题,然后运用数学中泰勒公式和麦克劳林公式的性质,对信息增益公式进行近似简化。通过具体数据的实例验证,说明优化后的ID3算法能够解决多值偏向问题。标准数据集UCI上的实验结果表明,在构建决策树的过程中,既提高了平均分类准确率,又降低了构建决策树的复杂度,从而还缩短了决策树的生成时间,当数据集中的样本数较大时,优化后的ID3算法的效率得到了明显的提高。