氧化温度和分散剂种类对Si3N4浆料性能的影响

研究了自蔓延燃烧合成Si₃N₄粉的氧化处理（在空气气氛中分别于400、600、800℃保温3 h）以及添加的分散剂种类（分别为聚丙烯酸钠、六偏磷酸钠、三聚磷酸钠、木质素磺酸钙）对制备的Si₃N₄浆料的抗沉降性、ζ电位和黏度的影响。结果表明：1)在空气气氛中于800℃保温3 h氧化处理后,粉体中Si₂N₂O含量增多;用其制备的浆料的稳定性最好,ζ电位绝对值较大,黏度最小。2)以六偏磷酸钠作为分散剂制备的Si₃N₄浆料的稳定性较好,ζ电位绝对值最大,黏度最小。3)添加0.021%（w）六偏磷酸钠制备的Si₃N₄浆料的ζ电位绝对值最大,黏度较小。     

Integrated shrinkage,relative humidity,strength development,and cracking potential of internally cured concrete exposed to different drying conditions

Internal curing (IC) technology using prewetted lightweight fine aggregates (LWFAs) as additives has been proved an effective means for mitigating both autogenous shrinkage and early-age cracking under sealed curing conditions. However, for practical structures in the field, concrete experiences more complex environmental conditions compared to under sealed curing. To better utilize internal curing technology for durable concretes, this study conducts comprehensive investigations on both control and internally cured concretes at water/cement (w/c) ratio of 0.3 and 0.4 in terms of the influence of age when concrete is exposed to drying and the drying duration on the developments of integrated shrinkage, internal relative humidity, compressive and flexural strengths, mass loss, and cracking potential. The results are beneficial for producing internally cured concrete with increased resistance to early-age cracking and enhanced durability for infrastructure applications.     

氯化1-{2-[双(2-氨基乙基)氨基]乙基}吡啶离子液体的合成及在ATRP反应中的应用

采用N-烷基化方法将二乙烯三胺（DETA）接枝到氯化1-氯乙基吡啶离子液体[CePy]Cl上,合成了离子液体氯化1-{2-[双（2-氨基乙基）氨基]乙基}吡啶（[N₃Py]Cl）,通过FTIR、¹H NMR和MS等测试手段对合成离子液体的结构进行了表征。采用循环伏安法对离子液体配合物[N₃Py]Cl/CuBr和有机配合物PMDETA/CuBr的氧化还原电位（E_1/2）进行测试,结果表明：合成的离子液体[N₃Py]Cl和CuBr形成配合物的氧化还原电势为E_1/2=-0.541V,比常用的有机配合物PMDETA/CuBr（E_1/2=-0.142V）具有更低的氧化还原电势。将离子液体[N₃Py]Cl与CuBr配位形成催化体系,在离子液体[AMIM]Cl中催化甲基丙烯酸甲酯（MMA）的原子转移自由基聚合（ATRP）反应。结果表明,当配体、催化剂和溶剂的用量分别为n（CuBr）=0.19mmol、n（[N₃Py]Cl）=1.13mmol、n（[AMIM]Cl）=0.02mol,反应温度60℃,反应时间4h时,单体转化率高达75%,分子量分布较窄（M_w/M_n=1.24）,ATRP反应具有明显的可控性能。     

Predicting the mechanical properties of Cu–Al2O3 nanocomposites using machine learning and finite element simulation of indentation experiments

Micromechanics model, finite element (FE) simulation of microindentation and machine learning were deployed to predict the mechanical properties of Cu–Al₂O₃ nanocomposites. The micromechanical model was developed based on the rule of mixture and grain and grain boundary sizes evolution to predict the elastic modulus of the produced nanocomposites. Then, a FE model was developed to simulate the microindentation test. The input for the FE model was the elastic modulus that was computed using the micromechanics model and wide range of yield and tangent stresses values. Finally, the output load-displacement response from the FE model, the elastic modulus, the yield and tangent strengths used for the FE simulations, and the residual indentation depth were used to train the machine learning model (Random vector functional link network) for the prediction of the yield and tangent stresses of the produced nanocomposites. Cu–Al₂O₃ nanocomposites with different Al₂O₃ concentration were manufactured using insitu chemical method to validate the proposed model. After training the model, the microindentation experimental load-displacement curve for Cu–Al₂O₃ nanocomposites was fed to the machine learning model and the mechanical properties were obtained. The obtained mechanical properties were in very good agreement with the experimental ones achieving 0.99 coefficient of determination R2 for the yield strength.     

电解槽零点电位差短路自切断装置的设想及安全改造思路

介绍电解槽零点电位差检测装置系统架构,分析该系统回路中存在的隐患,并提出改造思路.     

VMS系统服务向量空间的内部特征

详细分析了系统服务向量空间的内部特征,并给出系统服务与全局入口点虚地址之间的对应关系。     

Laplace算子△及其表示方法

本文主要讨论各种算子的特征值意义,研究Laplace算子△的各种常用的表达式,给出了部分复杂表示式的证明。     

点源二维地电断面地下电流磁场的数值解

任意地电断面点电源地下传导电流产生的磁场,可以表达成传导电流的电位在地表和地下电性不连续界面上的面积分。对点电源二维地电断面,通过沿其走向作一维傅里叶变换,电位的面积分又可转化为曲线积分。用边界元法可求这类面积分和线积分及积分中所包含的传导电流之电位的数值解,亦即求得电流磁场的数值解。     

轴对称问题线元上分布奇点的诱导速度势和诱导速度

本文给出轴对称问题线元上高次分布源和偶极在无界域中的诱导速度势和诱导速度的计算公式,可供用分布奇点法求解轴对称势流问题时参考.     

矢流洁净室室内流场的模型试验

本文对洁净室模型试验的相似理论问题进行了研究,提出了本模型实验所遵循的相似准则。根据相似准则设计了一个模型矢流洁净室,实测了室内速度场,得出室内流场的基本特点。研究表明,雷诺模型律是本实验模型流动和原型流动间正确的相似准则,室内流场有利于该种矢流洁净室达到较高级別的洁净度。