大块式动力基础的振动分析与加固处理

根据一大块式曲柄连杆机构的机器钢筋混凝土基础的振动测试与振动分析 ,诊断了基础发生工程事故的原因 ,并结合工程特点 ,在不改变基础设计的动力参数的情况下 ,确定了灌浆加固处理方法 ,并介绍了灌浆加固处理的效果。     

Pile Response Adjacent to Braced Excavation

The excavation of soil for the construction of basements or cut-and-cover tunnels results in ground movements. One particular concern is that the excavation-induced lateral soil movements may adversely affect any nearby pile foundation. The lateral loads imposed by the soil movements induce bending moments and deflections in the pile, which may lead to structural distress and failure. This paper presents the results of an actual full-scale instrumented study that was carried to examine the behavior of an existing pile due to nearby excavation activities resulting from the construction of a 16 m deep cut-and-cover tunnel. The pile was located 3 m behind a 0.8 m thick diaphragm wall. Excavation to the formation level that was 16 m below the ground surface resulted in a maximum lateral pile movement of 28 mm. A simplified numerical procedure based on the finite-element method was used to analyze the pile response. Generally, the theoretical predictions were in reasonable agreement with the measured results.     

非对称复合材料层板在面内载荷作用下的非线性横向变形或屈曲

本文利用广义富里叶级数法对非对称复合材料层板在面内载荷作用下的非线性横向变形或屈曲问题进行了分析。文中主要研究了四边简支边界条件下,非对称层板的铺层方式和面内载荷形式对横向变形的影响。通过求解非线性控制方程得到了层板的载荷—挠度曲线或特殊情况下的后屈曲平衡曲线。计算结果表明,对于大多数非对称复合材料层板在面内载荷作用下所产生的是横向变形问题,而不是分叉屈曲问题。     

液体火箭发动机研制情况的一些回顾

４０年来，我国液体火箭发动机的研制工作取得了很大成绩。文中对发动机的一些研制情况作了回顾，对ＹＦ－７３和ＹＦ－７５氢氧发动机的设计特点、飞行结果作了简单叙述。对今后工作也提出了看法。     

采用荷载平衡的概念表达预应力度及在初步设计中的应用

利用荷载平衡法的概念，将预应力度用等效荷载与外荷载的比值表达，设计可利用其比值确定预应力度，便其更简捷，明确，同时，提出了预应力度的真实值问题。     

一步法合成松香改性酚醛树脂

探讨了一步法合成松香改性酚醛树脂的反应机理，确定了最佳原料组成及合成工艺，由此制备出高溶解粘度和矿油容纳度的松香改性酚醛树脂，是一种性能优异的高级胶印油墨连接料     

OSEK/VDX——汽车电子系统的开放式平台

介绍了当前在国际汽车工业界日益占据主导地位的汽车电子系统开放式平台--OSEK/VDX体系.详细地论述了这种体系的由来、运行机制和最新的发展动向,以及它对汽车电子技术发展的深远影响.     

步行机攀登横杆的受力模型及分析

针对４足步行机器人的横杆攀登过程，在考虑弹性变形的基础上利用刚度矩阵建立其受力模型，并通过计算机仿真对攀登过程的不同情况进行了分析，其结果为具有攀登功能的步行机构结构设计及控制算法确定提供了理论依据。     

电传动装甲车辆冷却系统水路性能试验研究

根据电传动装甲车辆冷却系统高低温双泵双循环设计要求,通过台架联机试验全面测试了冷却系统双循环水路及各循环支路温度变化和水流量分配特性、发电机绕阻温度变化规律及低温循环水路工作性能,测试结果表明:发电机冷却水路与发动机循环水路串联可行,双循环水路及各循环支路水流量和进出口温度变化满足动力系统不同工作状态散热要求,所选部件匹配合理,达到设计要求.     

Nonlinear coupled problems in dynamics of shells

The coupled system of three partial differential equations governing a flexible shallow shell dynamics is analysed. No any prior assumptions about the temperature distribution through the shell thickness are applied. The efficiency of the method used here when applied to the solution of integral-differential equations with different dimensions (three-dimensional equations related to the Kirchhoff-Love model) and of different type (heat transfer equations and the hyperbolic equations of shell theory) is demonstrated. Many computational results are reported and discussed.