垂直腔激光器中弛豫振荡频率的优化控制

从垂直腔面发射的半导体激光器（VCSELs）的结构出发，利用增益与载流子密度的广义对数关系，借助小信号分析法，推出了直接调制情形下驰豫振荡频率的严格解析关系。分析指出，量子阱器件的光子寿命并非越短越好，欲提高VCSELs的驰豫振荡频率，除了增加注入电流，提高微分增益等基本途径外，控制器件的结构参数可使驰豫振荡频率达到极大值。同时，自发辐射因子的可控性，以及降低稳态载流子密度，也都是提高VCSELs驰豫振荡频率和拓宽调制带宽的有效措施。     

Investigations of surface characterization of silicone rubber due to tracking phenomena under a.c. and d.c. voltages

In the present work, tracking phenomena has been studied with silicone rubber material under the a.c. and d.c. voltages following IEC-587 standards. The surface condition of the tracked zone was analysed using wide angle X-ray diffraction (WAXD) and thermogravimetric differential thermal analysis (TG-DTA) studies. The tracking time was different for a.c. and d.c. voltages.     

大型钢制立式储罐的导链式倒装法施工

介绍了导链式倒装法安装大型钢制立式储罐的原理及制作工艺流程。     

VTI介质中弹性参数地震反演方法

根据地震波在具有垂直对称轴的横向各向同性（VTI）介质中的运动学特征，应用传播时间反演方法，进行了水平层状VTI介质的地层弹性参数反演方法研究。在VTI介质中，P－P波的传播时间曲线不再是双曲线，尤其在长排列情况下，已不能用二项泰勒展式精确地反演P－P波的传播时间，用三项泰勒展式则可以达到更高精度；P－SV波的传播时间也可用三项泰勒展式表达，在中等及短排列长度时可达到一定精神。对P－P波、P－SV波的传播时间进行三项泰勒展开时，它们的系数中包含了地震波的各向异性信息及垂直速度信息，中以为地震波的弹性参数反演提供提供基础，模试验分析及江苏油田某地区的二维多波资料实际反演结果表明，在最大炮间距为1．5倍地层埋深时，可以很精确地得到三项泰勒展式的系数，应用这些系数能精确反演地层弹性参数，包括P波、S波的垂直速度和各向异性参数。图4表1参5（杜丽英摘）     

Thermal degradation of cinnamoylated poly(vinyl alcohol)

Thermogravimetry and pyrolysis in combination with gas chromatography and infrared spectroscopy were the experimental techniques applied to the thermal degradation of cinnamoylated poly(vinyl alcohol) samples, constituted from vinyl alcohol-vinyl cinnamate photocrosslinkable copolymers. The thermal decomposition products include gases, liquids and solids. The gases are formed from saturated and unsaturated volatile hydrocarbons C₁? C₄, carbon monoxide and carbon dioxide. The liquid fraction includes aromatic hydrocarbons and some oxygenated organic compounds. The solid product identified in the greatest amount was cinnamic acid. The content in the thermal decomposition products varies considerably both with copolymer composition and temperature.     

带纵向槽筒形件拉深方法的研究

针对传境拉深带纵向槽筒形件的方法的缺点,采用一次拉深成形的方法,并通过试验和计算获得毛坯的形状和尺寸。     

Micromechanical characterisation of fibre/matrix interfaces

Theoretical analyses for the single fibre pull-out and push-out models under monotonic loading are given which are based on a shear-lag analysis in a fracture mechanics approach considering non-constant friction at the debonded interface as a result of fibre Poisson contraction (or expansion). The solutions allow the determination of typical fibre/matrix interfacial properties such as the interfacial fracture toughness, G_ic, the coefficient of friction, μ, and the residual clamping stress, q₀. Under cyclic loading the interfacial properties are expected to degrade as a result of repetitive abrasion, and a power law function is assumed between μ and the number of elapsed cycles, N. However, G_ic is assumed to be unaffected and a fracture mechanics based debond criterion is derived for the relationship between the external applied stress, the debond length and the reduced friction coefficient for both fibre pull-out and fibre push-out. In addition, the relative displacements between the free fibre end and the matrix top are obtained for cyclic fatigue when the fibre is loaded and unloaded. A relationship obtained for the protrusion (or intrusion) length in fibre pull-out (or push-out) experiments allows the severity of the interface frictional degradation to be evaluated and characterised. Similarities and differences in the frictional degradation behaviour between fibre pull-out and push-out are also identified.     

剂量率对聚四氟乙烯辐射裂解的影响

本文研究了在以电子加速器的电子射线为辐射源时,剂量率对PTFE辐射裂解的影响。在剂量相同的条件下,剂量率从1.44×10~4 rad/s增至5.75×10~4 rad/s,裂解效率提高3.3倍。剂量率和各断裂参数(单位剂量裂解度a_0,G(s)值等)均成线性关系。当裂解度一定时,剂量率与剂量成反变关系。     

桃林口水库大坝人工监测项目管理软件的开发与应用

介绍了桃林口水库大坝人工监测项目管理软件研制的意义。对软件结构、开发环境、基本计算原理、主要功能进行了详细阐述；并以大坝垂直位移分析为例,详细讲述了回归分析在资料分析中的具体应用。该软件的应用使工程管理水平上了一个新台阶。     

History of the stiffness method

This paper presents a brief history of the development of the stiffness method. We start by tracing the evolution of the method to solve discrete‐type problems such as trusses and frames composed of two node members. We then describe the method as it is applied to solve continuum problems modelled by finite‐difference and finite‐element methods. Copyright © 2006 John Wiley & Sons, Ltd.