新型组合式碳化法生产纳米级碳酸钙新工艺

介绍了组合式碳化新工艺理论依据、工艺特点、设备结构及与传统方法对比情况。新型组合式碳化新工艺具有设备结构简单、操作方便、易于实现自控操作等特点,产品质量稳定,同一套设备控制不同工艺条件,可生产多种晶型、不同粒度、不同性质的纳米级或微米级各类碳酸钙产品,低温能耗低、投资少,连续生产,生产效率高、单塔生产能力大,符合大型化生产需求。     

微波合成阿司匹林的工艺研究

本论文采用微波方法合成阿司匹林，用无水碳酸钠作催化剂量，研究了微波在有机合成中的应用及其他加热原理。利用了交互的正交试验方法，在反应物配比、微波功率，辐射时间和催化剂用量这四个因素中寻找出最佳合成工艺条件，从而提高了阿司匹林的产率，实现了有效地利用微波技术促进有机合成反应。     

立方形纳米碳酸钙的工业制备

介绍了工业制备高品质立方形纳米碳酸钙普遍适用的工艺路线及化学原理，提出了新的碳化反应模型、速率方程和晶体形貌控制理论，并讨论了生产过程中影响碳酸钙粒径的各种因素。     

碳酸钙填充塑料成本分析

碳酸钙粉体经过活化、造粒处理填充到聚乙烯薄膜,可使填充制品成本降低。随着填料的增加,其加工性能逐渐变差,单位质量塑料产品体积减小。经测算,使用填充剂后成本的降低足以弥补因体积减小产生的损失。对于薄膜制品而言,填充量小于10%效益增加不明显;超过30%,则不容易稳定成膜,影响成品质量。     

GYM系列亿丰磨在非金属矿物超微粉碎中的应用

干法生产超细粉是我国非金属粉体的重要加工工艺之一，传统的粉磨设备难以达到大量生产d97=2—10μm超细粉的要求，且生产效率低。阐述了采用多磨轮、多磨道原理设计的GYM-83型亿丰磨在生产粒径为11μ的碳酸钙干粉时，其累积分布达98％，粒径为2μm的占总质量44．96％，产量达到了1250kg／h，且基建投资少，性价比好。     

盘式干燥机在高纯碳酸钡生产中的应用

对盘式干燥机的工作原理、结构特点进行了详细介绍，并将其它干燥设备和盘式干燥机作了对比，指出高纯碳酸钡行业采用盘式干燥机可以将生产成本降到最低限度，而产品质量可以得到很大提高。盘式干燥机也可用于高纯碳酸锶、硫酸钡等粘性物料的干燥，效果也非常理想，应用前景广阔。     

Estimation of Concentration of Particles in Polymerizing Fluid during Centrifugal Casting of Functionally Graded Polymer Composites

The concentration of uniformly distributed particles in a fluid changes with time in the direction of gravitational or centrifugal force to form a concentration gradient. The change in the concentration is an outcome of velocity variation of particles in a fluid. A modified equation for terminal velocity, v _m of particles in polymerizing-fluid under centrifugal force is proposed to estimate the changes in the volume fraction of particles in the graded composites. The proposed equation introduces the effect of cure kinetics of polymer and its effect on particle movement in the model that was based on the modified Stoke’s law, considering the parameters related to particle hindrance, centrifugal force, particle dimensions, viscosity variation etc. The model predictions of concentration changes at the different locations of samples were compared with calcium carbonate filled polysulphide-modified-epoxy graded composites prepared by centrifugal casting.. The effect of particle size, delayed curing rate of matrix were explored. The simulated results are in good agreement with those of experiments.     

碳酸钙对乙烯-丙烯酸丁酯共聚物阻燃与力学性能及热降解行为影响研究

采用极限氧指数法、热重分析和差示扫描量热分析等研究了碳酸钙（CaCO3）对乙烯-丙烯酸丁酯共聚物（EBA）阻燃及热降解行为的影响，探讨了CaCO3对EBA力学性能和熔体流动速率的影响。结果表明，CaCO3降低了EBA的拉伸强度、断裂伸长率和熔体流动速率，但复合阻燃材料仍具有良好的加工性能；当CaoCO3含量为60％（质量分数，下同）时，阻燃材料的极限氧指数可达28．5％。CaCO3通过EBA在热降解过程中与之发生化学反应来改变EBA的热降解行为，提高在高温下的热稳定性，降低EBA的热降解速率，促进高温下成炭在凝缩相中发挥阻燃作用。此外，CaCO3与EBA在热降解过程中形成隔热、隔氧的多孔泡沫膨胀结构，可进一步加强阻燃效果。     

Electrochemical characteristics of phase-separated polymer electrolyte based on poly(vinylidene fluoride-co-hexafluoropropane) and ethylene carbonate

A polymer electrolyte based on microporous poly(vinylidene fluoride-co-hexafluoropropane) (PVdF-HFP) film was studied for use in lithium ion batteries. The microporous PVdF-HFP (Kynar 2801) matrix was prepared from a cast of homogeneous mixture of PVdF-HFP and solvents such as ethylene carbonate (EC), dimethyl carbonate (DMC), and ethyl methyl carbonate (EMC). After evaporation of DMC and EMC, a sold film of the PVdF-HFP and the EC mixture was obtained. EC-rich phase started its formation in the PVdF-HFP/EC film at EC content of about 60 wt.% based on the total weight of PVdF-HFP and EC. The formation of the new phase resulted in the abrupt increase of the porosity of the PVdF-HFP matrix from 32 to 62%. The ionic conductivity of the film soaked in 1 M LiPF₆-EC/DMC=1/1 was significantly increased from order of 10⁻⁴ S/cm to order of 10⁻³ S/cm at the EC content of 60 wt.%. Thermal and spectroscopic investigations showed that most of the EC interact with PVdF-HFP with the EC content being below 60 wt.%. MCMB/polymer electrolyte/LiCoO₂ cells employing the microporous PVdF-HFP polymer film showed stable charging/discharging characteristics at 1C rate and good rate capability.     

碳酸二甲酯市场现状及技术进展

目前,全球碳酸二甲酯(DMC)的产量约为12万t/a。生产方法有光气法、酯交换法、甲醇氧化羰基法和二氧化碳-甲醇直接合成法。我国DMC产量不足3万t/a,主要采用酯交换法和甲醇液相氧化羰基法。DMC可作为羰基化试剂代替剧毒物质光气用于合成聚碳酸酯、异氰酸酯、杀虫剂西维因等,用作甲基化试剂代替致癌物硫酸二甲酯合成苯甲醚。