碳酸丙烯酯脱碳装置技术改造小结

在碳丙脱碳装置中增加了贫液氨冷器 ,改造了碳丙泵 ,增设了变换气氨冷器 ,从而提高了碳丙脱碳装置的吸收和再生效果     

多孔碳酸钙陶瓷-人造珊瑚的研究

天然珊瑚有三维贯通的多孔网络结构，它的主要成分碳酸钙(CaCO3)在人体环境可降解。模拟珊瑚的组成与结构，研制新型的组织工程支架材料有着良好的应用前景。本文探索了多孔碳酸钙陶瓷的制备方法，并通过盐析法制备了一种多孔的碳酸钙陶瓷，有望获得高的孔隙率和孔连通性。     

提高镁回收率的途径及效益分析：白云石碳酸化法生产轻质碳酸镁新工艺研究

本文提出了白云石碳酸化法生产轻质碳酸镁，二次碳酸化法新工艺的理论依据、实验结果及技术经济分析。     

Copolymerization of trimethylene carbonate and 2,2-dimethyltrimethylene carbonate by rare earth calixarene complexes

Rare earth (Nd, Y, La) p-tert-butylcalix[n]arene (n=4, 6, and 8) complexes alone have been developed to catalyze random and block copolymerizations of trimethylene carbonate (TMC) and 2,2-dimethyltrimethylene carbonate (DTC). The random or block structure and thermal behavior of the copolymers have been characterized by SEC, NMR, DSC, XRD and PLM. Random copolymer with M_w of 14,100 and M_w/M_n of 1.36 was prepared by neodymium p-tert-butylcalix[6]arene complex under the conditions: [TMC+DTC]₀/[Nd]=400, 80 °C, 8 h. The reactivity ratios of TMC and DTC are measured to be r_TMC=4.68 and r_DTC=0.163, respectively. Random copolymerization could be well designed by the feeding ratio to prepare copolymers with controlled T_m and T_g. Only 8% TMC units in the polymer chain destroyed the crystallization of PDTC showing no T_m of the copolymer in the DSC analysis.     

丙碳脱碳溶剂的改进研究

介绍一种由丙碳、叔胺和少量活化剂构成的复合溶剂的开发，并详细地测定了不同压力和操作工况下，这种复合溶剂对ＣＯ２的吸收和解吸性能，以及溶剂的缓蚀性能和抗氧化性能．实验证明这种复合溶剂与纯丙碳相比，具有吸收容量大、速率快、脱碳净化度高、对设备无腐蚀等特点，对改进现行的丙碳脱碳工艺具有应用价值．     

前驱体热解法制备Al2O3的物相转变及其合成

本文着重考查了Al2O3的前驱体一碳酸铝铵沉淀的形成过程及煅烧过程物相变化，发现可通过调节反应条件和加入合适的表面活性剂，来控制碳酸铝铵晶核的形成及晶体的生长速度，有效地阻止了Al2O3的团聚，并在温度1150摄氏度下制备出分散的Al2O3，其平均粒径为－2um，比表面为－3m^2/g。     

Perkin反应合成肉桂酸

以无水碳酸钾为催化荆，PEG-400为相转移催化剂，对苯二酚为阻聚剂．通过Perkin反应合成肉桂酸，研究了物料比、催化刺用量、PEG-400用量、对苯二酚用量、回流时间对产品产率的影响。最佳反应条件是n(苯甲醛)：n(乙酸酐)：n(碳酸钾)：n(PEG-400)：n(对苯二酚)=1：3：1．1：0．03：0．02．回流溢度180℃时．回流时间1．5h，肉桂酸产率呵达82.4％。     

Solubility of Na2SO4, Na2CO3 and their mixture in supercritical water

The solubility of many salts in water decreases dramatically with temperature in the vicinity of the critical point of pure water. Examples of these salts are sulfates of sodium, potassium, lithium and sodium carbonate. These salts are usually produced during supercritical water oxidation (SCWO) and contribute to fouling. The solubility of Na₂CO₃ and Na₂SO₄ has been determined in pure form and in the presence of each other, for the temperature range relevant to SCWO. The experimental procedure was to pass the salt solution through a tube at constant temperature. After a brief initiation period during which no salt sticks to the tube, the salt above the solubility limit deposited on the tube surface. The solution leaving the section was thus at the solubility limit. A rapid decrease in the salt solubility was observed just above the pseudo-critical temperature. For supercritical conditions, the solubility of each salt in the form of a mixture was quite close to the solubility of pure salt. At the highest fluid density considered (480 kg/m³) the presence of Na₂CO₃ reduces the solubility of Na₂SO₄, as might be expected from the “common-ion effect”.     

铝系阻燃剂阻燃PP的力学性能研究

将用偶联剂处理的碱式碳酸铝镁加入到聚丙烯中，通过对体系阻燃性、力学性能等研究得出：碱式碳酸铝镁能够对聚丙烯起到良好的阻燃效果，碱式碳酸铝镁的加入提高了聚丙烯的冲击强度，当碱式碳酸铝镁质量分数为23％时，体系的冲击强度最高。研究了偶联荆的用量对体系力学性能的影响，结果表明，随偶联荆用量的增加，体系的拉伸强度降低，冲击强度先升高后降低，当偶联荆质量分数为1．0％时，体系的冲击强度最高。     

N-甲基吗啉绿色合成研究

N-甲基吗啉生产的传统工艺条件苛刻,对设备腐蚀严重、对人体造成巨大危害、对环境造成严重污染.利用碳酸二甲酯和吗啉为原料合成了N-甲基吗啉,采用正交试验方法讨论了原料配比、反应时间、反应温度对收率的影响,并得出了优选反应工艺条件为:物料配比为n(C4H8NO):n(C3H6O3)=1:1.2,反应时间为3 h,反应温度为100 ℃.在此条件下的产品经色质联用仪检测,产品收率可以达到95%以上.结果表明:此法具有原料价廉易得、操作容易控制、不污染环境,是一条简单易行的典型的绿色合成途径.