拉普拉斯变换的图形分析

以单边指数函数为例，分析了拉普拉斯变换象函数F(s)在其收敛域内随σ和ω的变化规律，通过|F(s)|曲面图来观察这些规律，并解释了图中某些特定点及剖面的含义，以形象化的方式加深对拉普拉斯变换的认识。借助MATLAB的绘图功能绘制出F(s)的曲面图、剖面图及信号的频谱图，从中可以观察到频域与复频域的关系以及系统函数的零极点分布等。     

-35~#轻柴油的生产

为满足市场发展的需求 ,胜利炼油厂用胜利混合原油为原料 ,根据用户要求成功开发生产了 -3 5 #轻柴油新产品。该产品完全符合国家标准GB2 5 2 -2 0 0 0中 -3 5 #轻柴油的各项质量指标要求 ,为胜利炼油厂赢得市场 ,增加了经济效益     

钢筋混凝土框架梁截面的优化确定

以梁的配筋和截面有效高度为优化设计变量 ,导出了 RC框架梁的优化配筋率和优化设计高度 ,并给出了各种荷载作用下 ,不同设防烈度和场地类别条件下的截面优化设计高度表达式 ,为设计人员提供了方便 .     

基础锚栓预埋加固方案

结合工程实例 ,介绍轻钢结构系统基础锚栓预埋、加固解决方案 ,并介绍了加固系统的制作及使用方法 ,可供工程人员参考     

三代微光管均匀性测试与分析

利用自行研制的“光电阴极多信息量测试系统”首次对国产三代微光管中的GaAs光电阴极的均匀性进行了光谱响应测试 ,结果表明该国产三代微光管存在明显的非均匀性。利用曲线拟合方法估算了GaAs光电阴极的材料性能参数 ,发现表面逸出概率不一致是非均匀性的主要原因 ,GaAs材料的少子扩散长度 (1 1 2～ 1 82 ) μm ,与阴极厚度相当 ,后界面复合速率在 (1× 1 0 5～ 1× 1 0 6 )cm/s之间 ,它限制了阴极灵敏度的提高     

Improvement of photon collection in Cu(In,Ga)Se2 solar cells and modules by fluorescent frequency conversion

Fluorescent photon down conversion for the improvement of the blue response of ZnO/CdS/Cu(In,Ga)Se₂ heterojunction solar cells and modules is investigated. Fluorescent dyes of the series Lumogen® F are analyzed by optical transmission and reflection as well as by photoluminescence measurements. A spectral transfer matrix formalism is introduced that allows to predict the suitability of a luminescent dye as a down-converter for a given solar cell from its absorption/emission properties. We find that Lumogen® F Violet 570 and Lumogen® F Yellow 083 as well as a combination of both yields improvements for Cu(In,Ga)Se₂ solar modules. Particularly, we find that the short circuit current density of a Cu(In,Ga)Se₂ mini-module is improved by 1.5 mA cm^− 2 when applying a varnish with a combination of Lumogen® F Violet and Yellow. About 0.5 mA cm^− 2 of this improvement is due to a reduced overall reflectance and an improvement of 1 mA cm^− 2 results from the frequency conversion by the dyes.     

套管井声波成像测井资料的采集与应用

过套管利用偶极子声波成像测量获得地层横波资料，在理论上讲是可行的。但此项目不仅国内测井公司未进行过现场作业，就连美国哈里伯顿公司也没有此项目的现场作业经验。新疆测井公司通过认真制订测井方案，克服了各种困难，首次顺利获得了优质的地层横渡资料，开创了测井技术史上在套管井中获得横波资料的先例。     

Polymerization behavior and polymer properties of eosin-mediated surface modification reactions

Surface modification by surface-mediated polymerization necessitates control of the grafted polymer film thicknesses to achieve the desired property changes. Here, a microarray format is used to assess a range of reaction conditions and formulations rapidly in regards to the film thicknesses achieved and the polymerization behavior. Monomer formulations initiated by eosin conjugates with varying concentrations of poly(ethylene glycol) diacrylate (PEGDA), N-methyldiethanolamine (MDEA), and 1-vinyl-2-pyrrolidone (VP) were evaluated. Acrylamide with MDEA or ascorbic acid as a coinitiator was also investigated. The best formulation was found to be 40 wt% acrylamide with MDEA which yielded four to eightfold thicker films (maximum polymer thickness increased from 180 nm to 1420 nm) and generated visible films from fivefold lower eosin surface densities (2.8 versus 14 eosins/μm²) compared to a corresponding PEGDA formulation. Using a microarray format to assess multiple initiator surface densities enabled facile identification of a monomer formulation that yields the desired polymer properties and polymerization behavior across the requisite range of initiator surface densities.     

重庆嘉华大坪隧道变断面衬砌台车设计

本文介绍变断面衬砌台车设计,用以解决重庆嘉华大坪隧道变断面大跨度衬砌施工。     

Facial detection and location based on skin color and eye characteristic

This paper comes true a system of facial detection and location. Firstly, it realizes the facial detection of candidate region used skin color for the given image, and considers the influence of similar skin. Secondly, it realizes the location for eye region used the gray characteristic of eye and correction of central measurement, and makes further selection for facial candidate region. The end, it normalizes the facial image and makes it as front standard image, so realizes the facial characteristic location.