双极性步进电机细分驱动器的设计与实现

论述了一种双极性步进电动机驱动器的工作原理，该驱动器能较好地改善步进电动机的运行性能，具有实用性强，结构简单，成本低的优点。针对实际调试中出现的问题进行分析后，提出了对策；最后给出了试验结果。     

声表面波脉冲编码调制振荡器

论述了一种直接式声表面波脉冲编码调制振荡器的工作原理及设计方法。实际制作了工作频率为３９４ＭＨｚ、调制频偏大于２００ｋＨｚ、调制信号码速率大于４００ｋｂｉｔ／ｓ、输出功率大于５０ｍＷ、温度稳定性优于±５０×１０－６（－２０°Ｃ～＋６０°Ｃ）的性能优良的声表面波脉冲编码调制振荡器     

10kV供电系统在煤矿生产中的应用

从多方面论证了井下超高压供电的可行性,并对矿井实际供电的应用情况进行了分 析,对6 kV、10 kV 2种供电系统的优缺点进行了对比,对大型矿井特别是超大型矿井供电提出了自 己的观点,对现代化大型矿井供电配置具有指导意义。     

Cyclic X-Y mechanical tests: A new method to perform in situ reversed-deformation experiments in the high-voltage electron microscope

There has been, in the past, only limited success with in situ cyclic or reversed plastic deformation tests in the transmission electron microscope (TEM). This is probably partly due to problems associated with buckling of the foil when an applied tensile or shear stress is reversed. Mechanical analysis shows that dislocation movement can be reversed by tensile stressing in alternating perpendicular directions (i.e., 90° rotations of a tensile stress); thus buckling of the foil can be avoided. A design for performing such X-Y in situ TEM tests is presented, with observations that demonstrate its feasibility.     

Characteristics and classification of high-current fault arcs on distribution systems

When a fault occurs on transmission or distribution systems due to lightning or overvoltage, often an arc discharge occurs at the fault point. The arc discharge, which is caused by a fault current, has a high current, high temperature, strong light emission, etc., thus it sometimes causes heavy damages to electric power equipment. The arc discharge is influenced by the conditions around the arcs, i.e., gas, insulation materials, gap length, weather, etc. Also, the arc voltage along the arc column indicates the characteristics of the arc. If the voltage waveforms of the arcs caused by the fault on transmission or distribution systems are classified, it is possible to find the location and the equipment where the fault occurred. In this paper, the arc voltage data in 6-kV class XLPE cables and 6-kV class overhead lines are analyzed and an artificial neural network method is applied to classify the arc voltage waveforms. The results obtained from the six artificial neural networks developed show that the artificial neural network method is effective for classification of arc voltage waveforms if adequate input parameters are selected.     

基于TMS320F2801 DSP新型电压监测仪的设计

针对目前普遍使用的电压监测仪在运行中存在的问题,从硬件及电气回路分析不足之处,提出基于TMS320F2801 DSP的改进型电压监测仪。     

孟加拉HATHAZARI 132kV电缆回流线取舍探讨

针对孟加拉Hathazari 100MW重油发电机组EPC工程132kV电缆现场实际设计、采购和敷设情况,通过理论计算探讨回流线取舍问题。     

A robust watermarking algorithm based on QR factorization and DCT using quantization index modulation technique

We propose a robust digital watermarking algorithm for copyright protection.A stable feature is obtained by utilizing QR factorization and discrete cosine transform(DCT) techniques,and a meaningful watermark image is embedded into an image by modifying the stable feature with a quantization index modulation(QIM) method.The combination of QR factorization,DCT,and QIM techniques guarantees the robustness of the algorithm.Furthermore,an embedding location selection method is exploited to select blocks with small modifications as the embedding locations.This can minimize the embedding distortion and greatly improve the imperceptibility of our scheme.Several standard images were tested and the experimental results were compared with those of other published schemes.The results demonstrate that our proposed scheme can achieve not only better imperceptibility,but also stronger robustness against common signal processing operations and lossy compressions,such as filtering,noise addition,scaling,sharpening,rotation,cropping,and JPEG/JPEG2000 compression.     

串联谐振耐压试验仪的设计与仿真

针对XLPE电力电缆耐压测试成本高、操作复杂等问题,本文中设计了一种变频串联谐振耐压试验装置。利用串联谐振电路的升压原理,构建了硬件电路,通过仿真对选择谐振点等问题进行了探讨。为了改进普通串联谐振耐压测试装置寻找谐振点慢、精度低的缺点,提出了一种解决方案。仿真结果表明,该方法能精确地确定谐振点。装置输出波形可靠性好,谐波分量少,具有良好的性能。     

带曲率补偿的带隙基准电流源的设计

简单介绍了带隙基准源的基本原理,给出了一款基于Widlar结构的带曲率补偿的带隙基准电压电流源的设计方法,通过采用TSMC₀.5μm工艺库对电路进行仿真,在-40～150℃的温度范围内,其带隙基准的输出具有12ppm/℃的温度系数,电流基准的输出具有42ppm/℃。此外,文中还对曲率补偿电路的工作原理进行了分析,并且通过仿真波形对曲率补偿的工作机制进行了讨论。