Screening model for assessing ‘cost’ of minimum flow requirements in the Svartå River,Sweden

The minimum flow requirements in the Svartå River in Sweden are directed at maintaining fishlife and providing suitable dilution for waste flows. The implications of varying the minimum flow requirements in the river are examined using a mixed integer optimisation model. The model is formulated as a modified method-of-weights technique with the economic issues of hydro-electricity generation, irrigation and urban water supply placed in the objective function and the minimum flows specified within the constraint set. The integer component of the model is required to model the operating policy at the major flow regulation facility in the system and the restricted validity of the irrigation permits. Application of the model shows that in dry years where competition between minimum flow levels and the other economic uses, is most intense, the levels achieved by the various economic objectives are only slightly reduced even with significant increases in the minimum flow requirements. Variations in minimum flow requirements of up to 45% only produce changes of 10% or less in the economic objectives. The lack of sensitivity of the objective levels is due primarily to the level of control exerted indirectly on the whole system in dry years by the release regulation policy and the restricted validity of the irrigation permits. In normal to wet years these policies are not as restrictive and more choice is available. In such years, however, there is generally sufficient water to satisfy all requirements and allocation is not a critical issue. The model itself is formulated generally so that a range of scenarios beyond those examined specifically in the paper can be considered.     

Water table fluctuation with a random initial condition

The nonlinear Boussinesq equation is used to understand water table fluctuations in various ditch drainage problems. An approximate solution of this equation with a random initial condition and deterministic boundary conditions, recharge rate and aquifer parameters has been developed to predict a transient water table in a ditch-drainage system. The effects of uncertainty in the initial condition on the water table are illustrated with the help of a synthetic example. These results would find applications in ditch-drainage design.Notation A / tanh t - a lower value of the random variable representing the initial water table height at the mid point - a+b Upper value of the random variable representing the initial water table height at the midpoint - B tanh t - C 4/ - h variable water table height - h mean of the variable water table height - h _m variable water table height at the mid point - h _m mean of the variable water table height at the mid point - K hydraulic conductivity - L half spacing between the ditches - m ₀ initial water table height at the mid point - N Uniform rate of recharge - S specific yield - t time of observation - x distance measured from the ditch boundary - (4/SL)(NK)^1/2 - (L/4)(N/K)^1/2 - dummy integral variable     

黄金冶炼厂污染源治理技术

本文阐述了采用加温加压无氰解吸、金电解精炼，活性炭酸洗、火法再生产工艺，所产生污染物的治理技术。     

气流床水煤浆气化技术的应用现状及开发进展

气流床水煤浆气化是煤高效、洁净利用的一项关键技术。简述了具有代表性的气流床水煤浆气化技术的应用现状及开发进展,并分析了影响水煤浆气化的主要因素,如烧嘴、耐火砖、进料系统、激冷环等,提出了一些改进措施。     

建筑供排水用聚丙烯管道(PP-R)特性简析

PP -R管道具有质轻、连接方便、良好耐热性和较小导热系数、耐腐蚀且管道阻力小等优点 ,属绿色产品 ,本文对施工过程中就PP -R管与混凝土的粘结不密、抗紫外性能差等问题提出了相应的处理措施     

Calculated effect of pulsed pheromone release on range of attraction

In order to assess the possible function of pulsed release of windborne pheromones, calculations were performed to predict the concentration pattern downwind of the source. Two patterns of pulsed releases (sinusoidal and instantaneous) were compared to a constant release pattern. In all three cases, the average rate of release was the same. Assuming the receiving animal needs only a momentary exposure to concentrations above threshold to respond, it is clear that sinusoidal release has a greater distance of detection than constant release and that instantaneous release is even better. The relative magnitude of the increase in range of detection depends on the ratio of average release rate to threshold concentration. Pulsed releases have a greater advantage when the threshold is high and the range of attraction is inherently short. Under these conditions, sinusoidal release can double the range of attraction and instantaneous release can increase it 10-fold. In contrast, with a low threshold and consequent long range of attraction, the pulsed patterns are lost and the increase in range is insignificant. Several testable predictions are derived from the hypothesis that the primary function of pulsed release is to extend the range and time over which a given quantity of pheromone can act.     

Pervaporation performance analysis and prediction—using a hybrid solution-diffusion and pore-flow model

A hybrid mathematic model for pervaporation is proposed which incorporates the concepts of solution-diffusion model and pore model. The model allows performance prediction as well as the establishment of the internal concentration and pressure profiles within the membrane. The model parameters specific to the particular membrane and mixture system are determined using liquid sorption and pervaporation experimental data. The model is experimentally examined using ethanol–water mixtures and poly(dimethyl siloxane)–poly(vinyldiene fluoride) (PDMS–PVDF) composite membranes. The characteristics of flux and separation factor predicted using the model are in fair agreement with the experimental data under various feed concentrations and downstream pressures for different membrane arrangements, including single-layer, reverse single-layer and double-layer PDMS–PVDF composite membranes. Internal profiles of pressure, concentration and component mole fraction can be established using the model. Concentration polarization phenomena for ethanol and water are located at membrane interfaces and vapor–liquid interfaces, respectively. Performances of several different membrane designs are compared using the model.     

纺牵—步法中粗旦丙纶长丝沸水收缩率初探

在纺牵联合一步法纺丝机上研究了丙纶切片的熔融指数对纤维沸水收缩率的影响，发现熔融指数高的切片，其纤维的沸水收缩率变化大。沸水收缩率随热定型的温度升高而下降。沸水收缩率可根据用户提供中心值（Ｍ）通过实验确定，一般以Ｍ±１．５为宜。     

Numerical Analysis of the Constrained Blister Test

The constrained blister test is investigated through finite element analysis to determine the applicabilities and the limitations of the new technique. Numerical results confirm that the strain energy release rate asymptotically approaches a constant value. These results also show that the test technique and the approximate solution for strain energy release rate are applicable for some practical cases.     

Moisture Distribution and Dewatering Efficiency for Wet Materials

This review paper summarizes current research efforts toward a comprehensive view of wet material dewatering, considering the binding energy as the strength to hold water, and rupture energy given to remove moisture from materials.