方波信号在音频技术中的应用

本文重点介绍了方波依赖在音频测量，设备的维护检测及录音均衡自动调节等音频技术中的应用，并通过对方波信号的频谱特性和方波信号通过线性系统的频域特性的分析，简要说明了方波信号在应用电路中的基本工作原理。     

一种提高地震速度解释精度的新方法

本以利用速度谱所伴生的叠加能量，采用二次曲线插值方法，寻找最大的叠加能量有所对应时间，然后利用叠加速度进行倾角校正，相位校正和最大炮检距校正，获取比较精确的层速度参数。     

叠后高分辨率资料处理方法及应用效果

高分辨率勘探是一项系统工程，它由多个环节组成。甚至叠后高发辨率资料处理也是由多个环节组成。本文介绍的叠后高分辨率资料处理流程主要包括Ｌｐ模自适应预测统计反褶积，高频成分补偿，振幅补偿及有色成分校正。文中还就处理流程中各种方法的合理组合，各种方法自身参数的合理选取作了试验和探讨，最后给出了处理实例。     

蒙特卡洛法速度谱的自动拾取

蒙特卡洛速度谱的自动拾取采用一种非线性优化的快速方法，所得叠加速度的精度可以满足常规地震资料处理中叠加的要求，转换为层速度后可用于叠前深度偏移成象，在给定初始速度模型前提下建立优化目标函数。采用蒙特卡洛非线性优化算法，以最大相似度量准则在考虑实际地质条件前提下给出速度约束条件，对初始速度模型加以扰动，自动寻找速度谱中叠加能量的全局最优解，从而获得合理的速度模型。实际地震资料处理的应用结果表明，自动拾取速度谱比常规的人工速度谱解释工作的效率大幅度提高。在SUN Ultra60机上,仅需1h即可完成2000km的地震资料的速度谱拾取任务，而且所获得的速度模型不受人为因素影响，转换所得的层速度模型用于叠前深度偏移后，获得了满意的成象效果。     

微通道电泳芯片系统中信号识别算法的设计与实现

介绍适用于微通道电泳芯片系统的DNA测序软件的总体流程，以及其中的信号处理与识别算法。以激光诱导荧光检测系统所采集到的原始数据为源信号，以小波平滑和小波去噪为理论基础，将滤波算法和峰值识别算法综合在一起进行设计，从而使其适用于检测速度更快、样品量更少的微通道电泳芯片系统。将本算法应用于DNA片段的分离实验中，可以有效地达到滤波以及信号识别的目的。     

Systematic analysis of neutron yields from thick targets bombarded by heavy ions and protons with moving source model

A simple phenomenological analysis using the moving source model has been performed on the neutron energy spectra produced by bombarding thick targets with high energy heavy ions which have been systematically measured at the Heavy-Ion Medical Accelerator (HIMAC) facility (located in Chiba, Japan) of the National Institute of Radiological Sciences (NIRS). For the bombardment of both heavy ions and protons in the energy region of 100–500 MeV per nucleon, the moving source model incorporating the knock-on process could be generally successful in reproducing the measured neutron spectra within a factor of two margin of accuracy. This phenomenological analytical equation is expressed having several parameters as functions of atomic number Z_p, mass number A_p, energy per nucleon E_p for projectile, and atomic number Z_T, mass number A_T for target. By inputting these basic data for projectile and target into this equation we can easily estimate the secondary neutron energy spectra at an emission angle of 0–90° for bombardment with heavy ions and protons in the aforementioned energy region. This method will be quite useful to estimate the neutron source term in the neutron shielding design of high energy proton and heavy ion accelerators.     

Effect of heat-treatment on the surface properties of gallium phosphide nanosolids by Raman spectroscopy

Raman spectra of gallium phosphide （GAP） nanosolids （unheated and heat-treated at 598 and 723 K, respectively） were investigated. It was observed that both the longitudinal optical mode （LO） and the transverse optical mode （TO） displayed an asymmetry on the low-wavenumber side. The scattering bands were fitted to a sum of four Lorentzians which were assigned to the LO mode, surface phonon mode, TO mode, and a combination of Ga-O-P symmetric bending and sum band formed from the X-point TA ＋ LA phonons, respectively. Analysis of the characteristic of surface phonon mode revealed that the surface phonon peak of the GaP nanosolids could be confirmed. In the infrared spectrum of the GaP nanoparticles, we observed the bands on account of symmetric stretching and bending of PO2, as well as stretching of Ga-O The Raman scattering intensity arising from the Ga-O-P linkages increased as increasing the heat-treatment temperature.     

一种基于小波变换的OTDR事件分析算法的研究

简单分析了用 OTDR卡进行光纤检测的原理 ,根据小波分析检测信号突变点的理论 ,提出了运用小波分析对光纤断点及反射事件准确定位的方法。理论分析和实例计算表明 ,这种方法对 OTDR曲线中反射事件尤其是断点的定位非常准确 ,是一种行之有效的方法     

降低雷达接收机中噪声的几种方法

噪声是影响雷达接收机灵敏度的重要因素。本文通过讨论雷达接收机噪声的来源，分析并提出了集中降低雷达接收机内部和外部噪声的几种方法，具有一定的实际意义。     

MAXIMUM ENTROPY DECONVOLUTION OF XPS PEAK

Necessity of XPS spectrum,deconvolution,disadvantages of the traditional Fast Fourier Tranderm decon-volution method(FFT),princtple,method and advantage ofMaximum Entropy Deconvolution Method (MEM) are de-scribed.Criteria for determing the number of data points sam-pled in MEM are the main point disccussed in the paper,someXPS deconvolution applications of our MEM software showthat the MEM makes XPS deconvolution much easier than thetraditional FFT method.