Ni－Fe－Cr－B－Si涂层超塑扩散焊接的强化效应及耐磨性

研究了Ｎｉ－Ｆｅ－Ｃｒ－Ｂ－Ｓｉ合金涂层超塑性扩散焊接及焊接后的强化效应。通过对涂层的组织结构分析、硬度及耐磨性能的测试表明，当基材（５ＣｒＭｎＭｏ钢）与涂层产生协调超塑变形时，涂层原颗粒间、涂层与基材结合界面完全焊合。超塑焊合后的涂层比高频重熔及火焰重熔涂层硬度（ＨＶ）提高１００－１５０，耐摩擦磨损性能提高３０％。指出，沉淀强化、细晶强化及晶内位错密度增加是引起涂层强化效应和提高耐磨性的主要因素。     

焊缝跟踪技术的研究与展望

本文回顾了电弧焊接的焊缝跟踪技术，并重点对该技术的发展趋势进行了介绍与分析，     

压力容器缺陷检测及补焊修复

本文对不同种类、结构、工作条件、制造质量压力容器的缺陷检测处理和现场补焊修复的原则和工艺作了详细的叙述。     

Study on diffusion welding SiCp/ZL101 with Cu interlayer

Through the vacuum diffusion welding SiCp/ZL101 aluminum with Cu interlayer,the effect of welding parame-ter and the thickness of Cu on the welded joint property was investigated,and the optimal welding parameters were putforward at the same time.The microstructure of joint was analyzed by means of optical-microscope,scanning electron mi-croscope in order to study the relationship between the macro-properties of joint and the microstructure.The results showthat diffusion welding with Cu interlayer could be used for welding aluminum matrix composites SiCp/ZL101 successfully.     

激光-电弧复合焊接过程中高频干扰的消除

激光-电弧复合焊接过程中,由于引孤产生的高频干扰了激光器的控制系统,造成了激光和电弧不能实现复合焊接.通过分析研究高频引弧对焊接电源和激光器的干扰途径,采取相应的措施,有效地消除了高频干扰问题,成功实现了激光和电弧之间的复合焊接.     

高效焊管新工艺——金属管液相扩散焊

采用镍基非晶态箔带作中间层,在加压情况下(约几MPa)使之熔化、保温,进行了钢管瞬间液相 (TLP)扩散焊试验。结果表明,可以获得无夹杂的致密界面;接头过渡区的最终厚度显著变薄;焊后中间层主组元由焊前的Ni变为Fe;容易获得性能合格接头。值得指出的是,焊接时间约为3min,远低于手弧焊所需时间。     

铝合金激光-电弧复合焊接工艺研究

对LF6铝合金的激光-电弧复合焊接工艺进行了初步研究。通过工艺试验,分析研究了焊接速度、激光焦点位置、钨极与激光束之间的距离、焊接电流对焊缝质量(熔深、熔宽)的影响规律。     

Effect of pulse parameters on microstructure of joint in laser beam welding for SiC_p/6063 composite

1　INTRODUCTIONSiC particlesreinforcedcomposites ,thankstotheirlowcostsandhighlevelofstructuralproperties ,areshowingtheirpotentialincivilandmilitaryappli cation .SiC particlesreinforcedaluminummatrixcomposites wideapplicationinaerospaceandautomo tiveareattributedtotheirperformanceofhighspecif icstrength ,highspecificstiffness ,highelasticmodu lusandexcellentwearresistance .Thecoefficientofthermalexpansionandthermalconductivitycanberegulatedbychangingthecontentandsizeofrein forcingparticl…