风力发电机组无线监测系统设计

针对目前风力发电机组有线监测系统安装、维护不便和监测点有限等问题,设计了一种基于Zig Bee的无线传感器网络监控系统。通过网关将Zig Bee协议转换成TCP/IP协议后,Zig Bee子网采集的数据,经光纤网络传送至中心服务器,并通过登陆界面来显示和控制无线监测系统,实现风力发电机组的智能化监测。测试表明:测量精度达到设计要求,实现高效率、高可靠性的监测,并通过Internet提供远程数据服务,进行离线数据分析和挖掘。     

阵列式多针-柱电极装置实现离子风的实验与分析

为了实现一定气体流速的离子风,设计了一种新型的阵列式三排3 ×3垂直放置的针-柱电极结构放电装置.在针-柱之间间距为3mm、排与排之间间距为8 mm、镇流电阻12 MΩ、放电电阻12 MΩ、测试电阻1 kΩ、大气压环境、室温、无外部通入气流时,阵列式针-柱电极实现了稳定的电晕放电,并通过示波器记录的放电波形、数码相机拍摄的发光图像以及放电伏安特性曲线进行了验证.同时,随着阵列式排数的增加,放电电流变大,离子风风速也随之增大.该针-柱结构易于用MEMS工艺加工制作,可应用于便携式分析仪器中.     

平行梁式电容传感器力学性能的仿真与分析

针对S型平行梁式电容称重传感器参数结构设计问题,运用有限元软件ANSYS Workbench对平行梁式弹性体结构进行参数化模拟仿真,基于二次多项式曲面拟合建立其结构力学性能与主要结构参数的函数关系,并通过算例分析验证了拟合公式的有效性。研究表明,拟合公式对复杂仿真计算后的结果有很好的近似,能更好的反应实际情况,公式结构更加简洁,具有较快的收敛速度、较高的精度和较好的推广能力,有利于准确实现平行梁式电容称重传感器结构参数设计。     

用三维实体单元分析薄壁箱型结构应注意的问题

从四边固定正方形板受均布载荷的经典问题入手,结合不同类型单元的特点,探讨应用三维实体单元分析薄壁箱型结构时应注意的几个问题,纠正三维实体单元分析和应用的误区,为提高结构分析计算结果精度提供参考.     

基于Maven的J2EE后台管理系统代码生成器

后台管理系统功能和模式相对固定,为了降低软件开发人员的重复工作量,缩短项目的开发周期,应用基于模板技术的代码生成原理,设计一款基于Maven的后台管理系统代码生成器,完成从业务模型到后台管理系统的代码生成;从业务文件定义、业务文件解析到模板合成阐述本代码生成器的内部结构。     

基于IOS平台的小型仓储管理系统设计

随着数字化、信息化技术在物流领域应用的飞速发展,各种各样的仓储管理系统日益受到关注。本文介绍的基于IOS平台的小型仓储管理系统是利用IOS设备对货物信息进行采集,通过SQLite数据库技术、ZXing库等软硬件方式构建的业务系统,可以较好地适应中小规模用户数据交互的需求。同时,系统具备造价低廉、操作便捷等优点。     

Comparing techniques for authorship attribution of source code

Attributing authorship of documents with unknown creators has been studied extensively for natural language text such as essays and literature, but less so for non‐natural languages such as computer source code. Previous attempts at attributing authorship of source code can be categorised by two attributes: the software features used for the classification, either strings of n tokens/bytes (n‐grams) or software metrics; and the classification technique that exploits those features, either information retrieval ranking or machine learning. The results of existing studies, however, are not directly comparable as all use different test beds and evaluation methodologies, making it difficult to assess which approach is superior. This paper summarises all previous techniques to source code authorship attribution, implements feature sets that are motivated by the literature, and applies information retrieval ranking methods or machine classifiers for each approach. Importantly, all approaches are tested on identical collections from varying programming languages and author types. Our conclusions are as follows: (i) ranking and machine classifier approaches are around 90% and 85% accurate, respectively, for a one‐in‐10 classification problem; (ii) the byte‐level n‐gram approach is best used with different parameters to those previously published; (iii) neural networks and support vector machines were found to be the most accurate machine classifiers of the eight evaluated; (iv) use of n‐gram features in combination with machine classifiers shows promise, but there are scalability problems that still must be overcome; and (v) approaches based on information retrieval techniques are currently more accurate than approaches based on machine learning. Copyright © 2012 John Wiley & Sons, Ltd.     

Multi-Wavelength vs. Binary Code Pattern Unwrapping in Fringe Projection Method

Phase extraction, phase unwrapping and phase to height conversion are consecutive steps within the fringe projection method for reconstruction of 3D objects. The procedure of determining discontinuities on the wrapped phase, resolving them and achieving the unwrapped phase is called phase unwrapping. A software system was developed that provides the ability to create many kinds of patterns with a verity of desirable properties suitable for different demands in fringe projection systems. In our previous work, an experimental study was reported based on a multi-wavelength unwrapping approach. In the following work, we implemented a new method called binary code pattern unwrapping that is based on time analysis. A comparison of the two unwrapping approaches in terms of resolution, quality, noise, depth accuracy, and computational cost is provided.     

活性污泥法处理污水两个重要参数的理论探讨

负荷、泥龄是活性污泥法处理城市污水设计、运行中的重要参数.给出了有机负荷的动力学表达形式(称之为动力学负荷),并对有机负荷和泥龄的关系,有机负荷和泥龄对水质、污泥沉降性能影响进行了理论探讨.