AHMED experiments on hygroscopic and inert aerosol behaviour in LWR containment conditions: experimental results

Hygroscopic NaOH, CsI, CsOH and inert Ag aerosol behaviour at different temperatures and relative humidities (RH) has been studied in a well instrumented and controlled vessel of 1.81 m³ total free volume. Homogeneous thermal-hydraulic conditions for aerosol measurement in the vessel were achieved. The aerosol number and mass concentration were measured continuously during the experiments using a Condensation Nucleus Counter and a Tapered Element Oscillating Microbalance. The particle size distribution and chemical composition in the test conditions were measured by Berner low pressure impactors. In the case of NaOH the half life of the aerosol mass concentration was more than four times longer at low RH (22%) as compared to high RH (96%). The half lives of the CsOH and CsI aerosols were only twice as long at low RH as compared to high RH. Thus at high RH (96–97%) the half lives of CsOH and CsI were twice as long as the half life for the NaOH aerosol. The faster decay of the NaOH aerosol is due to the smaller density decrease of NaOH during water condensation. CsOH particles grew rapidly to their equilibrium size at all humidities. The measured equilibrium size for CsOH aerosol agree well with the calculated particle size at different RHs. Experimental results were also compared with calculations obtained by severe accident computer codes. These calculated results will be presented in a later paper.     

蒸汽压法测定导热油热分解温度的研究

根据克拉贝龙—克劳修斯方程，建立了国内外文献未见报道的测定导热油热分解温度的试验装置和试验方法，测定了大量国内外导热油的热分解温度，数据表明该法具有准确、简单、实用、省时、省力等优点     

热分层流动计算中若干差分格式的比较

本文应用常规的守恒方程及湍流模型，对二维池内热分层流动建立了数学模型，并在Ｐａｔａｎｋａｒ的压力校正法基础上对该数学模型进行了数值计算，计算中的差分格式为乘方格式、一阶迎风、二阶迎风和ＱＵＩＣＫ。通过与实验的比较分析，建议计算应采用ＱＵＩＣＫ格式，并在进行风格独立性试验的基础上使用加密网络。     

彩色PDP用玻璃基板

本文讨论了彩色ＰＤＰ现用钠钙玻璃的热稳定性，指出由于这种玻璃在热处理过程中易变形和收缩，因而不适合作大面积彩色ＰＤＰ基板材料，介绍了彩色ＰＤＰ基板玻璃的制造方法和特点。最后介绍了日本旭硝子公司和美国康宁公司各自为彩色ＰＤＰ新开发的玻璃基板材料ＰＤ２００和ＣＳ２５。     

Thermal Stability of Some Metabolically Conjugated Potential Precursors of Flavor Components in Meat and Milk

The stability of selected metabolic conjugates (phenylphosphate, phenylglucuronide, naphthylglucuronide, and naphthylsulfate) was evaluated in model systems. Phenylphosphate was less stable than the glucuronides and the sulfate, especially under neutral (pH 6.8) and acidic conditions (pH 1.5). Phenylphosphate was completely degraded after 1.7 hr at 100°C, and after 0.3 hr at 150°C at pH 6.8. The glucuronide and sulfate conjugates were especially stable under neutral conditions (pH 6.8) requiring > 5 hr for complete hydrolysis at 100°C. All conjugates were quite stable to hydrolysis under alkaline conditions (pH 11). The presence of certain organic solvents (ethyl acetate or ethyl ether) caused rapid hydrolysis of conjugates under very mild conditions (40°C for 30 min). This information may improve under-standing of flavor production from animal products.     

4，4＇－二苯醚二甲酸改性PET的热性能研究

采用示差扫描量热和热重分析的方法对合成的不同４，４＇－二苯醚二甲酸（ＯＢＢＡ）含量的共聚酯的热性能进行了研究。结果发现共聚酯的熔点和热结晶温度与ＰＥＴ相比有所降低；而冷结晶温度则升高。随着ＯＢＢＡ添加量的增加，在恒温热重分析中热失重速率常数减小；在升温热重分析中，热失重活化能则增加。所有的实验结果皆表明，芳族醚键的引入对提高共聚酯的热性能有重要作用。     

全液压稠油热力开采过程井下流体的传热

针对稠油黏度高、密度大、驱替效率低,常规方法开采困难等问题,开展了稠油开采装置研究。介绍了全液压稠油开采装置在原油开采过程中的加热功能,分析了采油装置系统井下流体流动及传热过程。结合理论研究方法和热力学计算,建立了井下流体热交换的物理和数学模型,并对模型进行了分析、矫正和求解。以实际油井参数和液压油的流量、温度为输入参数,通过计算机仿真模拟了井下热交换参数之间的关系,从而改进了已获得的热交换理论方程和模型,并得出了原油的产量与液压油的输入量之间的关系,以及保温提采原油所需要的最小液压油输入量。该模型的建立为进一步研究不同井况和不同输入状态下的流体传热提供了理论依据。     

沁水盆地北端煤层气储层特征及富集机制

煤层气的富集与储层特征密切相关,并受地质条件的制约。在详细研究煤储层特征及煤层气富集机制的基础上,对沁水盆地北端煤层气的开发前景进行了初步评价。煤岩、煤质、煤体结构及孔渗性、吸附性的观察和测试显示,该区煤层厚度大,热演化程度高,局部发育构造煤,裂隙较发育,吸附性能力强,含气量高,含气饱和度偏低,适合煤层气的开发。该区煤层气的富集主要受控于热演化史和埋藏史。在区域变质的背景上,叠加了岩浆热变质作用,生气强度大。另外,煤层的埋深、顶底板封闭性及水文地质条件都会影响煤层含气量的大小,煤层气富集是多因素有效配置的结果。      

高压注水管柱受力分析

进行高压注水管柱受力分析的目的就是根据注水条件研究注水管柱在不同过程中的各类效应，以及这些效应对管柱产生的受力和变形规律，从而明确注水管柱的工作状态，保障注水管柱有效合理地工作。较详细地分析了高压注水管柱在锚定、坐封以及注水3个过程中的受力状态和变形情况，并分析了高压注水管柱在不同过程中受到的各种效应的影响，推导出注水管柱在不同过程中的应力及变形的计算公式，并给出了算例。