抓住机遇迎接挑战 为保护美丽长江再谱新篇

当前长江流域水资源保护面临难得的机遇,如何推进长江水生态文明建设,打造水清地绿天蓝的生态廊道是长江水资源保护工作的重大课题。通过对长江水资源保护问题的梳理,规划了今后一段时期的总体构想,从规划体系、水功能区监管、水生态保护、应急管理和监测监控等5个方面探讨了下一步的工作重点;提出了长江干流、主要支流、三峡、丹江口和长江口以及重点湖泊的保护措施;通过健全法规体系、创新管理机制、强化能力建设等,以逐步提升长江水资源保护能力、健全长江水资源保护管理体系,为保护美丽长江再谱新篇。     

On a novel press system with six links for precision deep drawing

The objective of this paper is to propose a novel press system with six links for precision deep drawing, and verify its feasibility. First, the system is presented and its advantages are discussed. Then, the kinematic analysis of the system is obtained by examining the geometry of the design. Moreover, kinematic dimensions of the variable coupling are found by using optimization method. Furthermore, the proposed approach is illustrated by a design example, its solid model for the proposed design is established, and then kinematic simulation is performed by ADAMS software. Finally, a prototype and an experimental setup are established, and the experiment is conducted. The results show that the proposed new mechanism is feasible and of reasonable accuracy. In addition, it has the advantages of easy manufacture, lower cost, higher precision, and easy adjustability.     

定长槽单向弥散方程的理论解及其应用

论文导出了定长槽的单向弥散方程解。解包含槽下游封闭和开敞并伴有流速的两种条件。根据定长槽和半无限长槽单向弥散方程解的比较结果,只要弥散系数D和流速u相等,且弥散前锋尚未到达定长槽下游边界以前,那么两者相对浓度C/C0的分布相同。据此,可取定长槽进行试验,而用相应于半无限长的简单公式计算分析。     

Optimal blank design based on finite element method for blades of large Francis turbines

Metal pressing process that is widely used in industries has advantages over casting process for producing large Francis turbine blades from thick plates. Prior to the pressing process, blank design is firstly performed to determine flat blanks. The traditional trial and error approach is not applicable to blade design for Francis turbines that are not standard due to hydraulic characteristics of power plant sites. The rapid development of computing technology makes it possible to obtain optimal flat blanks by numerical modelling and simulation. In this paper, inverse finite element approach is investigated for blank design and an elasto-plastic model has been built using the well-known commercial software ANSYS. Numerical simulations for blade unfolding models with thick shell elements, solid elements and shell elements have given results with negligible differences. Unfolding tests with simple geometries have been carried out and the numerical results agree well with the analytical solutions. A large and thick shape of a Francis turbine blade for a hydropower plant has been successfully unfolded by inverse FE model. Sensibility analysis shows that the middle surface of the flat blank is independent of blade thickness. For ensuring the machining of the blade after the pressing process, a new contour is obtained by extending the boundary of the flat blank provided by the numerical model. This research may provide a useful tool for optimal blank design of Francis turbine blades.     

Nano-composite ZrO2/Au film electrode for voltammetric detection of parathion

This work describes the fabrication of ZrO₂/Au nano-composite films and its application for voltammetric detection of organophosphate pesticides. The nano-composite ZrO₂/Au film was prepared through a combination of sol–gel procedure and electroless plating that can be carried out in a general chemistry lab with no need for special facilities and reagents. The sensing performance of the ZrO₂/Au nano-composite film electrode toward parathion was studied with square wave voltammetry. The nano-ZrO₂ showed a strong affinity toward the phosphate group on parathion molecules, which provides sensitivity and selectivity of the sensing film. A linear relationship was obtained between the peak currents and the concentration of parathion, with a detection limit for standard samples of 3 ng/ml. In addition, interference studies showed that structurally similar compounds without phosphate groups would not interfere with the response toward parathion of the film electrode.     

Pro/engineer在产品曲面造型设计中的实现与评估

以产品曲面设计评估技术要求为依据,从技术应用角度论述pro/engineer软件在产品曲面设计中的构建方法和检测手段。从而证明pro/engineer在产品曲面设计中的应用可缩短产品的设计过程。     

基于系统动力学的环境污染演化博弈问题研究

用系统动力学建立环境污染管理问题中政府管理部门与生产排污企业之间的一个混合战略演化博弈模型.仿真结果表明:非对称结构的2*2混合策略演化博弈模型不存在演化均衡.从监管部门的角度出发,改变博弈支付矩阵在演化博弈过程始终保持不变的情况,在博弈支付矩阵中考虑动态惩罚策略.结果表明,本策略的演化博弈模型存在演化稳定均衡,即Nash均衡.系统动力学为演化博弈理论的验证和应用提供一个政策仿真实验平台.     

Fabrication of patterned single-walled carbon nanotube films using electrophoretic deposition

Thin films of chemically functionalized single-walled carbon nanotubes (SWNTs) were fabricated by using a direct current (dc) electrophoretic deposition method. SWNTs were shortened and then functionalized with acid chloride group to combine with the amine group-terminated gold substrate. Silica nanospheres with a diameter of about 190nm were arrayed on gold substrate to pattern a thin SWNT film. Periodically patterned SWNT film was eventually produced and would be used in potential applications like electron emitters and large surface area electrodes.     

高熵合金氮化物薄膜的研究进展

基于多元高熵合金思想制备的高熵合金氮化物薄膜由于多种元素相互混合,易于产生高熵效应、晶格畸变效应和缓慢扩散效应,使得该新型薄膜体系形成简单的非晶结构和纳米晶结构。依赖于成分和制备工艺,多元高熵合金氮化物薄膜表现出简单的固溶体结构和优异的性能,因而在许多领域极具应用潜力。综述了高熵合金氮化物薄膜的发展概况、组织特点、性能特征、制备方法和应用前景,并对高熵合金氮化物薄膜的发展方向进行了展望。