掺杂染料的向列相液晶微粒材料的非线性光学研究

对布满液晶微粒的聚合物(PDLC)进行了简并四波混频及光学双稳态的研究,并在文中对相关的PDLC中的分子重取向和热效应的非线性光学效应进行了讨论.     

偶氮二异丁腈用量对聚丙烯酰胺质量的影响

在已建成投产的聚丙烯酰胺装置上，优化偶氮二异丁腈催化剂用量，可降低产品中残余单体含量，提高聚合物分子量。试验证明，偶氮二异丁腈用量为500mg／L时，反应速度适中，反应温度比用量为800mg／L和1000mg／L时上升平稳并且能完全反应。试验结果还表明，使用新配方不但每年可降低生产成本450万元，而且能提高产品质量，每年增加销售收入1000万元。     

聚苯硫醚酰胺的合成与表征

用4-氯苯甲酰4′-氯苯胺和硫化钠为原料在常压下合成了聚苯硫醚酰胺,并对其进行了表征。结果表明所合成的产物为结晶性聚合物,并且有较高的热稳定性。     

汽车用聚酰胺亚胺

美国BP Amoco化学品和工程聚合物公司在原Amoco公司的技术和产品基础上推出许多汽车工业用工程塑料,具有高比强(强度/重量)和高比刚性(刚性/成本),其中聚酰胺亚胺(PAI,     

In—situ Composite Based on Poly （ethylene terephthalate）,Polyamide and Polyethylene with Microfibres Formed through Extrusion and Hot Stretching

In-situ composites based on dispersed poly (ethylene terephthalate) (PET) or polyamide (PA),and continuous Polyethylene (PE) were prepared through a single screw extruder of Haake rheometer system with a rod-die relatively small in diameter.The extrudate was drawn at a drawing ratio of 3.1,and then quickly cooled in cold water.The specimens were obtained by injection molding at processing temperatures less than 190℃，far below the melting temperature of PET (265℃) and PA (230℃),which can maintain the solid state of PET and PA microfiber phase in the composites.Morphological observation with scanning electron microscopy (SEM) indicated that PET and PA can more or less form in-situ microfibers at compositions studied (0-20 wt pct PET or PA),and especially,PET and PA were almost deformed into fibers at the concentration of 15wt pct.Eensile strength and especially.PET and PA were almost deformed into fibers at the concentration of 15wt pct.Tensile strength and modulus of the blends reinforced by PET or PA microfibers showed to be increased from the tensile test results.The most noticeable improvement of the tensile properties occurred at 15wt pct of PET in PET/PE system,corresponding to the highest microfiber content,where the tensile strength reached 32.5 MPa,whereas only 19.5 MPa for the pure PE.     

胍基聚合物的合成及抗菌性能

采用熔融缩聚的方法合成了聚亚己基胍盐酸盐（PHGC）及聚亚己基双胍盐酸盐（PHBG）。应用气相渗透压法（VPO）及粘度法测定了其分子质量，应用元素分析，FT－IR，XPS分析了聚合物的化学组成，抗菌活性的研究结果表明所合成的胍基聚合物具有较强的而且广谱的抗菌性能。     

双螺杆反应挤出模型的研究

详细研究了双螺杆中反应挤出聚合物的动力学模型、流动模型和传热模型。通过实验得到了双螺杆反应器中聚合物的停留时间分布及平均停留时间。