PCB废水总氮处理达标的工艺探讨

对PCB废水总氮的处理,从源头削减、分质收集、分质预处理到末端处理提出了多种方法,着重分析了MAP+管式微滤膜处理氨氮废水、多级组合式RO处理硝态氮废水和A2O+MBR处理综合废水,提出PCB废水总氮达标的组合工艺,项目建成后达到预期效果。     

物流信息管理系统开发

文章针对物流作业系统的现状及特点,设计并实现了一个基于J2EE的物流信息管理系统。该系统使管理人员可以通过浏览器轻松完成统计和监查物流信息、维护数据、分配和追踪终端实时状况等功能,清晰、层次化地体现了物流情况。     

电梯及地下室低成本覆盖解决方案探讨

电梯及地下室的深度覆盖是4G网络建设中的难点,影响用户的业务使用感知。文章分析电梯与地下室场景的特点及网络覆盖中的难点,针对传统的信号覆盖方案的优缺点进行分析,提出可行的电梯及地下室低成本覆盖解决方案,并与传统的信号覆盖方案的建设成本与技术特点进行比较。此外,文中对低成本建设方案中的电磁辐射情况进行计算,可满足电磁环境控制限值的规范要求。     

雪花啤酒凭什么斩获三项金匠奖?

2019年12月27日,在北京举行的"2019CMO价值营销峰会暨金匠奖颁奖盛典"上,雪花啤酒凭借《雪花马尔斯绿新品上市传播活动》《勇闯天涯super品牌创立一周年传播活动》《"匠心年夜饭"CNY自有IP打造》三个营销案例,分别荣获"B2C最佳整合营销奖银奖""B2C最佳社交媒体传播奖银奖"和"B2最佳品牌IP奖铜奖"。     

Microstructure,electrical and dielectric properties,and aging behavior of ZPCCA varistor ceramics with Er2O3 doping

The microstructure, electrical and dielectric properties, and DC-accelerated aging of the ZPCCA(ZnO-Pr6O11-CoO-Cr2O3-Al2O3) ceramics were investigated with various contents of Er2O3. The ceramic phases consisted of a bulk phase of ZnO grains, and a minor secondary phase of mixture of Pr6O11 and Er2O3. The increase of the content of doped Er2O3 increased the densities of sintered pellet from 5.66 to 5.85 g/cm3, and decreased the average grain size from 9.6 to 6.3 μm. With the increase of the content of doped Er2O3, the breakdown field increased from 2390 to 4530 V/cm, and the nonlinear coefficient increased from 28.4 to 39.1. The sample doped with 0.25 mol.% Er2O3 exhibited the strongest electrical stability; variation rates for the breakdown field measured at 1.0 mA /cm2, and for the non-ohmic coefficient were –3.4% and –23.8%, respectively, after application of a stress of 0.95 EB/125 ℃/24 h.     

功能化纳米金属有机骨架材料的合成及其药物传输应用

本文总结了最近与纳米金属有机骨架材料(NMOFs)相关的研究进展,重点是合成策略、功能化修饰和药物传输方面应用。     

Effects of Cooling Rate and Component on the Microstructure and Mechanical Properties of Mg–Zn–Y Alloys

The microstructure and mechanical properties of Mg–6Zn–1Y and Mg–6Zn–3Y(wt%) alloys under different cooling rates were investigated. The results show that the second dendrite arm spacing(SDAS) of Mg–6Zn–1Y and Mg–6Zn–3Y is reduced by 32 and 30% with increasing cooling rates(Rc) from 10.2 to 23 K/s, which can be predicted using a empirical model of SDAS=68 R 0:45:45cand SDAS=73 R 0c, respectively. The compressive strength of both alloys increases with increasing the cooling rate, which is attributed to the increase of volume fraction(Vf) of secondary phases under high cooling rate. The interaction of the cooling rate and component with SDAS has been theoretically analyzed using interdependence theory.