一步法合成(E)-1,3-二取代丙-2-烯-1-酮类化合物

报道了一种温和的,以二氧化锰为氧化剂,通过串联氧化反应-Wittig反应-氧化反应,一步制备(E)-1,3-二取代丙-2-烯-1-酮类化合物的合成方法。使用该方法,我们合成7个具有代表性的化合物。     

1-氨基-2-(N,N-二甲氨基)-4-羟基-蒽醌的合成新方法

以分散红60和DMF为原料,在碳酸钾作用下反应制备得到1-氨基-2-(N,N-二甲氨基)-4-羟基-蒽醌,产品收率92.8%。     

Er_2O_3改性尼龙6的制备及性能研究

用熔融纺丝法成功制备了PA6/PP-g-MAH/Er2O3纤维材料,采用DSC、FTIR研究Er2O3对尼龙6的结构性能影响,通过检测混合样品的熔融指数、拉伸强度和断裂伸长率研究Er2O3对尼龙6的力学性能影响。结果表明:当Er2O3的添加量为4 phr时,PA6/PP-g-MAH/Er2O3初生纤维强度提高了51%,断裂伸长率增加了10.6%,同时结晶温度降低,熔融温度降低,熔体流动速率提高。     

2,3-吡啶二甲酸的合成

采用喹啉为原料,以高锰酸钾为氧化剂,以水为溶剂,经过氧化、浓缩、浓盐酸酸化、抽滤、干燥,合成了2,3-吡啶二甲酸,产率43.7%。     

钛基多元大孔材料光催化降解有机废水

TiO2由于光催化活性高、价格低廉、无毒等特点受到人们广泛关注。人们将形状不规则粉体TiO2制备成纳米大孔空心球等形状,以提高催化剂的悬浮性能和回收性能。同时,为了进一步提高TiO2对有机废水的光催化降解性能,对TiO2进行了掺杂改性的研究。文章主要介绍了掺杂改性大孔TiO2在光催化降解有机废水中的研究。     

An Unexpected Construction of 2‐Arylquinolines from N‐Cinnamylanilines through sp3 C?H Aerobic Oxidation Induced by a Catalytic Radical Cation Salt

An unexpected reaction of cinnamylanilines was achieved through the radical cation salt‐induced aerobic oxidation of sp³ C H bonds, providing a series of 2‐arylquinolines. The mechanistic study shows that the cinnamylaniline was oxidized to an imine, which was attacked by the aniline generated through decomposition of the corresponding imine. After further intramolecular cyclization and aromatization, 2‐arylquinolines were obtained. This reaction provides a new method to construct 2‐arylquinolines from readily accessible starting materials.

     

Palladium‐Catalyzed Oxidative Carbonylation of Aromatic C−H Bonds with Alcohols using Molybdenum Hexacarbonyl as the Carbon Monoxide Source

With molybdenum hexacarbonyl as the carbon monoxide source, a general palladium‐catalyzed carbonylative transformation of the C−H bond on aromatic rings to produce esters has been developed. Good yields of the corresponding products have been obtained with wide functional group tolerance and excellent regioselectivity. A variety of aliphatic alcohols are suitable reactants here.

     

Synthesis and optimization of high-performance amine-based polymer for CO2 separation

Membrane technology features inspiring excellence from numerous separation technologies for CO₂ capture from post-combustion gas. Polyvinylamine (PVAm)-based facilitated transport membranes show significantly high separation performance, which has been proven promising for industrial scale-up. However, commercialized PVAm with low molecular weight and excessive crystallinity is not available to prepare high-performance membranes. Herein, the synthesis process of PVAm was optimized by regulating polymerization and acidic hydrolytic conditions. The membranes based on PVAm with a molecular weight of 154 kDa and crystallinity of 11.37% display high CO₂ permeance of 726 GPU and CO₂/N₂ selectivity of 55 at a feed gas pressure of 0.50 MPa. Furthermore, we established a PVAm synthesis reactor with an annual PVAm solution (1%(mass)) capacity of over 7000 kg and realized the scaled-up manufacture of both PVAm and composite membranes.     

核桃壳活性炭的制备及其对烟酸缓释性能的研究

以二氧化碳(CO2)物理活化法制备了核桃壳活性炭,考察了活化温度、活化时间对核桃壳活性炭得率及烟酸吸附量的影响。以所制备的核桃壳活性炭为烟酸载体,在不同的释放介质(蒸馏水、人工胃液或人工肠液)中进行烟酸释放性能研究。结果表明,人工胃液和人工肠液能促进活性炭对烟酸的释放,其累计释放率分别达到43.96%和47.69%。核桃壳活性炭在3种不同介质中的不同释放阶段的释放过程均符合Higuchi模型。