膨胀水泥浆体系在苏丹1/2/4区块水平井固井中的应用

随着苏丹1／2／4区块的深入开发，为了加快开发主力油层，提高原油产量，降低钻井成本，GNPOC在此区块布置水平井开发任务。所开发的区域主要分布于Heglig，Munga，Simbir，Bamboo区块，油层所在是Zaqar和Bentiue地层。此层位具有高渗透，地层温度高，易塌、气窜等复杂问题，尤其是Heglig和Munga地区井壁坍塌严重。为此，根据地质资料、井身结构和对水平井注水泥的技术要求，科学合理设计施工工艺，优选出适合此地区固井施工的冲洗液和隔离液，特别是经过努力实践，开发出了新型膨胀水泥浆体系，此体系具有高强度、低失水、无析水、防气窜之功效。结合使用哈里伯顿CPT—Y4大功率固井车，精确计量和自动密度控制，该体系水泥浆目前已在7口水平井施工中得以应用，均为优质井。现正在被大量使用，此体系的开发，解决了该固井技术难题，创造了中国固井在海外首次水平井作业一次成功的历史记录，具有较高的经济和社会效益。     

Co^3＋—modified Surface of LiMn2O4 Spinel for its Improvementof Electrochemical Properties

Cobalt was used to modify the surface of spinel LiMn2O4 by a solution technique to produce Co^3 -modified surface material (COMSM). Cobalt was only doped into the surface of LiMn2O4 spinel. XPS(X-ray photoelectron spectroscopy) analysis confirms the valence state of Co^3 . COMSM has stable spinel structure and can prevent active materials from the corrosion of electrolyte. The ICP(inductively coupled plasma) determination of the spinel dissolution in electrolyte showed the content of Mn dissolved from COMSM was smaller than that from the pure spinel. AC impedance patterns show that the charge-transfer resistance (Rct) for COMSM is smaller than that for pure spinel. The particles of COMSM are bigger in size than those of pure spinel according to the micrographs of SEM(scanning electron microscopy). The determinations of the electrochemical characterization show that COMSM has both good cycling performance and high initial capacity of 124.1 mA/h at an average capacity loss of 0.19 mAh/g per cycle.     

The influence of NaCl and CO2 on the atmospheric corrosion of magnesium alloy AZ91

The influence of NaCl and CO₂ on the atmospheric corrosion of magnesium alloy AZ91 is studied in the laboratory. Samples were exposed under carefully controlled air and flow conditions; the relative humidity was 95%, the temperature was 22.0°C and the concentration of CO₂ was < 1 ppm or 350 ppm. Different amounts of sodium chloride (0–70 μg/cm²) were added before exposure. The corrosion products were analyzed by gravimetry, ion chromatography, X‐ray diffraction and scanning electron microscopy. Mass gain and metal loss results are reported. The combination of high humidity and NaCl is very corrosive towards AZ91. However, the NaCl‐induced corrosion is inhibited by ambient concentrations of CO₂. Exposure in the absence of CO₂ gives rise to heavy pitting, with brucite, Mg(OH)₂, being the dominant corrosion product. In the presence of CO₂ a layer of hydrated magnesium hydroxy carbonate, Mg₅(CO₃)₄(OH)₂ · 5 H₂O forms. A tentative corrosion mechanism is presented that explains the behavior in the two environments.     

Obtaining Characteristic 4f–4f Luminescence from Rare Earth Organic Chelates

We report a study of a series of heavy rare earth tris‐8‐hydroxyquinolines (REQ₃s), using UV‐visible absorption spectroscopy, infrared absorption spectroscopy, and photoluminescence (PL) measurements. We show that the heavy REQ₃s are all chemically similar to each other and to aluminium tris‐8‐hydroxyquinoline, at least in terms of the ligand behavior. Characteristic rare earth 4f–4f luminescence is only observed for ErQ₃ and YbQ₃ due to the relatively low energy of the ligand triplet state. We show that a triplet transfer mechanism cannot be responsible for the observed Yb 4f–4f luminescence observed in YbQ₃. Instead, an internal chemiluminescent process is shown to be energetically favorable. The thin film PL spectra of all the heavy REQ₃s are dominated by triplet emission, except for that of ErQ₃, for which transfer to the Er³⁺ ion represents an efficient alternative. The PL spectra of powder samples, which would be expected to consist of approximately equal amounts of both isomers, are dominated by singlet emission. This is in contrast to the results from the thin films, and suggests that the isomer which predominates in the thin films has a much higher intersystem crossing rate than the other isomer.     

包装发展需要环境友好包装材料

环境友好包装材料是一类具有环境意识特征的概念.环境友好包装材料依据“4R 1D“原则,注重包装材料与环境的协调性,指导包装材料的研发,一是有利于保护自然资源;二是对生态环境损害最少化.运用环境友好包装材料的概念,实现包装的可持续发展.     

High‐Tech‐Cellulose‐Funktionspolymere nach dem ALCERU®‐Verfahren

Functional High‐Tech‐Cellulose materials by the ALCERU® process Cellulose is one of the eldest materials of mankind. While the use of cellulose in former times was focused on application as a more construction or as a more textile material at present time the application profile turns to a more functional material using the ALCERU® process. Shaping of pure cellulose dissolution in NMMNO permits the manufacturing of materials for upholstery, filtration or biodegradable film strips having an uniform cross section. Fibreds, which can be applied in several packaging materials, are available using different techniques for regeneration cellulose. A great field of innovative functional cellulose materials is opened up by addition of several functional additives to cellulose dissolution. In this way piezo‐electrical conductive cellulose fibres (PZT) or high‐temperature filtration membranes are to be generated if one adds special types of ceramic powders. Above all PZT green fibres are applied in more recent uses as sensors or actuators. Electrically conductive cellulose fibres or filaments, which can be also used in the textile chain, can be prepared adding conductive carbon black to a cellulose dope on the same way, too. Cellulose material having adapted conductivity to different application is available by adding an exact defined amount of carbon black to cellulose dissolution. Finally cellulose beads can be manufactured by means of varied shaping technique. The beads are showing variable particle sizes and narrow pore size distribution. These properties open up very interesting application in the field of human blood purification or chromatography.     

Sicherer und wirtschaftlicher Betrieb von Kraftwerken – Ergebnis der Forschung im Bereich Werkstoffe,Auslegung und Instandhaltung

Safe and Economic Operation of Power Plants – Research Results in the Field of Materials, Design and Maintenance Components of power plants which undergo high temperatures are subjected to complex loading situations. The requirements on the used materials result from the special operation conditions of the plants and have to be adjusted to the steadily growing requirements on higher efficiency of the complete power plant as well as to those of safe and economic operation. The expenses for control and downtimes are directly connected with economic efficiency and availability. However, in case of new procedures or components it is not possible to revert to the existing know‐how. Different failure mechanisms than known before can occur. The same goes for the load situation. Therefore the knowledge base has to be extended to in‐advance or even parallely running scientific examinations that life assessment and maintenance strategies can be applied which guarantee the operational reliability and the efficiency of the plant. The main emphasis of these F&E works has to be put on condition monitoring based on actual operational data, the standard materials’ and component’s behaviour (deformation, damage and failure behaviour) in connection with design of components and the related material laws. In the framework of applied AVIF projects, following problems are handled:. – qualification of materials by determinating parameters related to practise. – optimal design of components by making available material laws and numerical tools. – economic manufacturing of components by qualifying processing methods such as welding. – The results can be transferred to concepts for safe and economic operation of power plants, especially for newly introduced materials for which there is no operational experience available.     

Measurement-related uncertainties in overcoring data at the Äspö HRL, Sweden. Part 2: Biaxial tests of CSIRO HI overcore samples

This paper is the second dealing with measurement-related uncertainties of overcoring data undertaken at the Äspö Hard Rock Laboratory and focuses on the biaxial test data from CSIRO HI overcore samples. The first paper dealt with measurement-related uncertainties in connection with the overcoring phase [1].The uncertainties identified in connection to biaxial tests of CSIRO HI overcore samples include too large applied pressures and poor sampling frequency. At the Äspö HRL, the results yield that most overcore samples fractured during biaxial testing, meaning that a significant part, 56%, of available strain gauge combinations were removed from calculations of the elastic parameters. Remaining strain gauge combinations indicate average values of 62±5 GPa for Young's modulus and 0.25±0.01 for Poisson's ratio, which are considerably lower than previously published values [2–5], and are in good agreement with results from biaxial tests on Borre Probe overcore samples [6–10]. The stress calculations were obtained from re-analyzed elastic parameters and strains, and show primarily a reduction in stress magnitudes. Overall, the stress field obtained with different stress measurement methods and its variation with depth is now quite well resolved. The overcoring data suggest that the principal stresses are inclined with a vertical component dipping about 65° from the horizontal over the investigated rock volume (140–420 m depth). This is interpreted as a result of influence from the sub-vertical NE-2 Fracture Zone that divides the stress data into two stress domains [11], although it may also be an artefact because the σ₂- and σ₃-magnitudes are of the same order of magnitude.