[Cu_2(Gly—GlyO)_2(OH)_2(4,4—bpy)]·9H_2O配合物合成、晶体结构研究

采用Gly—GlyOH,4,4＇—联吡啶与Cu(NO_3)_2·H_2O在二次水溶液中反应,合成出以4,4＇—bpy为中继基,Gly—Glyo为螯环新型双核铜配合物。经X射线单晶结构分析确定该配合物品体的化学结构式:[(H_2NCH_2CONHCH_2COO) Cu(OH) (C_(10)H_8N_2)Cu(OH) (H_2NCH_2CONHCH_2COO)]·9H_2O.晶体属于三斜晶系,P_空间群,晶胞参数a=1.1412nm,b=1.2298nm,C=1.4269nm,α=113.82°,β=101.91°,y=103.64°,V=1.6747nm~3,Z=2。衍射数据是在Nicolet XRD R3型四圆衍射仪上收集,结构参数经块矩阵最小二乘法精修后,最终一致性因子R值为0.068,RW值为0.057。     

Electrochemical performance of nanocrystalline Li3V2(PO4)3/carbon composite material synthesized by a novel sol–gel method

A novel sol–gel method based on V₂O₅·nH₂O hydro-gel was developed to synthesize nanocrystalline Li₃V₂(PO₄)₃/carbon composite material. In this route, V₂O₅·nH₂O hydro-gel, NH₄H₂PO₄, Li₂CO₃ and high-surface-area carbon were used as starting materials to prepare precursor, and the Li₃V₂(PO₄)₃/carbon was obtained by sintering precursor at 750 °C for 4 h in flowing argon. The sol–gel synthesis ensures homogeneity of the precursors and improved reactivity. The sample was characterized by XRD, SEM and TEM. X-ray diffraction results show Li₃V₂(PO₄)₃ sample is monoclinic structure with the space group of P2₁/n. The TEM image indicates that the Li₃V₂(PO₄)₃ particles modified by conductive carbon are about 70 nm in diameter. The Li₃V₂(PO₄)₃/carbon system showed that the discharge capacities in the first and 50th cycle are about 155.3 and 143.6 mAh/g, respectively, in the range of 3.0–4.8 V. The sol–gel method is fit for the preparation of Li₃V₂(PO₄)₃/carbon composite material which may offer some favorable properties for commercial application.     

Electrochemical and surface-enhanced Raman spectroscopy studies of 4-phenylpyridine adsorption at the gold/solution interface

The adsorption of 4-phenylpyridine (4-PhPy) on the Au electrode was examined using conventional electrochemical techniques: cyclic voltammetry and impedance measurements and also by surface enhanced Raman spectroscopy (SERS) in a wide range of electrode potentials. Electrochemical results indicate the strong adsorption of 4-Phpy molecules, particularly at the positively charged Au electrode. The wide shoulder of capacity close to the pzc suggests that the composition and/or the structure of 4-Phpy monolayer change with the sign of the surface charge on the electrode. Investigation of integrity of adsorbed layer, however, indicates that adsorbed molecules do not form tight, compact monolayer even in the case of adsorption from saturated solution. SERS spectra provided evidence for gradual, potential-induced reorientation of the molecular plane with respect to the surface, from nearly vertical in the negatively charged electrode, to more flat at the positively charged metal surface.     

F离子掺杂TiO2的性能研究

以NH4F为掺杂剂，采用溶胶-凝胶法制备F离子掺杂型TiO2光催化剂，对其进行XRD、XPS和PL表征，结果表明，F离子掺杂ToO2由于Ti—F配位体的形成而能抑制金红石相的生成，同时F离子掺杂能增加TiO2表面缺陷浓度并降低Ti2P键的结合能，另外，由于F离子能取代Ti—OH配位体而降低了表面羟基氧浓度．光催化研究结果表明，F离子掺杂提高了TiO2光催化活性近1．5倍．     

环氧树脂/蒙脱土纳米复合材料性能的研究

用一种新型的热稳定性较好的改性剂2，2’-二[4-(4-氨基苯氧基)苯基]-丙烷(BAPP)改性钠基蒙脱土，再与环氧树脂进行纳米复合制备了环氧树脂／蒙脱土纳米复合材料。讨论了蒙脱土用量对环氧树脂／蒙脱土纳米复合材料性能的影响，并对其结构和性能进行了表征和测试。结果表明：改性使蒙脱土层间距变大，制备出的环氧树脂／蒙脱土纳米复合材料剥离结构较好，环氧树脂／蒙脱土纳米复合材料的玻璃化转变温度和动态储能模量随改性蒙脱土用量的增加呈现较好的递增趋势。     

4-氨基吡啶的合成技术进展及其应用

评述了4-氨基吡啶的合成研究进展,重点介绍了硝基氮氧化吡啶法工艺。概括介绍了4-氨基吡啶在医药、农药、染料等领域的应用状况以及在国内外的生产现状。指出4-氨基吡啶合成工艺的难点在于降低生产成本,提高反应收率以及减少环境污染。建议从催化加氢还原或电化学还原过程中找到一条合乎国情的工艺路线,以推动我国吡啶系列产品的研发工作。     

Synergistic Influence of Poly(4-Vinylpyridine) and Potassium Iodide on Inhibition of Corrosion of Mild Steel in 1M HCl

The corrosion and inhibition behavior of mild steel in 1 M HCl in the presence of poly(4-vinylpyridine)(P4VP) and potassium iodide (KI) was investigated using weight loss measurements, potentiodynamic polarization studies and impedance measurements. The inhibition efficiency increased with increasing P4VP concentration. The inhibiting action of P4VP is considerably enhanced by the addition of potassium iodide. The adsorption of this compound either alone or in combination with iodide ions on the metal surface is found to obey Lamgmir's adsorption isotherm. The experimental results suggest that the presence of iodide ions in the solution increases the surface coverage and, therefore, indicate the joint adsorption of P4VP and iodide ions. On the other hand, it was found that the inhibiting effect of P4VP and (P4VP + KI) increased with increasing temperature of the corrosion medium. The presence of these species in the solution decreases the double layer capacitance and increases the charge transfer resistance, both derived from Nyquist plots obtained from a.c. impedance studies. The variation of charge transfer resistance with time suggests that the inhibitive action of (P4VP + KI) depends mainly on the protective inhibitor film formed on the steel surface.     

Adsorption and desorption characteristics of 2-methyl-4-chlorophenoxyacetic acid onto activated carbon

Adsorption and desorption characteristics of the 2-methyl-4-chlorophenoxyacetic acid (MCPA) from aqueous solution onto the activated carbon (GAC, F-400) were studied. Adsorption equilibrium capacities of the MCPA increased with decreasing pH and temperature of the solution. Adsorption equilibrium of the MCPA could be represented by the Sips equation. The internal diffusion coefficients were determined by comparing the experimental concentration decay curves with those predicted from surface diffusion model and pore diffusion model. The adsorption model based on the linear driving force approximation (LDFA) was used for simulating the adsorption behavior of the MCPA in a fixed bed. Over ninety five percent desorption of the MCPA could be obtained using distilled water.