RELAP5程序与三维时空中子动力学模型的耦合以及改进研究

引入堆芯物理计算的两群三维时空中子动力学模型,对RELAP5程序的点堆中子动力学模型进行了改进,同时设计了可视化界面,可方便地实现人.机交互操作.计算结果与实际应用表明,改进后的RELAP5程序计算功能和精度得到提高,使用更加方便,在核动力装置的仿真方面有很好的应用前景.     

Influence of washing and of heat-treatment conditions on the thermal stability of VPI-5

Thorough washing of a VPI-5 synthesized with n-dipropylamine as template improves greatly its thermal stability while no major change is observed in the template content. A detailed study of the influence of the pretreatment conditions shows that in order to obtain a high thermal stability (up to at least 960 °C) two parameters are of importance. The removal of both the template and the adsorbed water requires either a low heating rate at atmospheric pressure or a low pressure (less than 3 Torr) when the heating rate is 300 ° per hour.     

Electrical and optical properties of MoO3-V2O5 mixed oxide films

Vacuum deposited MoO₃-V₂O₅ films of different molar concentrations have been used for DC electrical conductivity studies at different temperatures. The optical absorption spectra of MoO₃-V₂O₅ films of different molar concentrations have been measured. From these measurements it is found that optical band gap and activation energy vary with molar concentration of MoO₃-V₂O₅ films.     

An infrared spectroscopic study of the mechanism of chloromethane conversion to higher hydrocarbons on HZSM5 catalyst

Investigation of the reaction mechanism of chloromethane on ZSM5 is a new topic. In this work an in situ FTIR technique was employed to study the conversion processes of chloromethane, the active sites on HZSM5, and the desorption state of surface species. The catalytic conversion of chloromethane to higher hydrocarbons was also studied. It is demonstrated that chloromethane can be reversibly adsorbed on acidic sites of HZSM5 at room temperature. At 100°C chloromethane is irreversibly and dissociatively adsorbed on the strong acidic sites of HZSM5, on which surface methoxyl is formed as proved by infrared characteristic C-H stretchings of-CH₃ at 2960 and 2870 cm^–1. Alkoxyls are produced and adsorbed on the catalyst surface as characterized by the infrared absorption bands of -CH₂-groups at 1460 and 2930 cm^–1. At 100°C the adsorbed methoxyl and alkoxyls are the main surface species, and a small amount of aromatics might exist as detected by a characteristic absorption band at 1510 cm^–1. Between 100 and 200°C the adsorbed surface methoxyl and alkoxyls are converted to aromatics, and the occupied OH groups partially appear. At temperature higher than 300°C the adsorbed aromatics are thermally desorbed into the gas phase. Aromatics and alkanes are the main products in catalytic conversion. These results reveal that the formation of aromatics from methoxyl and alkoxyls is easier than the desorption of aromatics from HZSM5 catalyst. An alkoxyl mechanism is proposed for the conversion of chloromethane on HZSM5 based upon the experimental results and the three assumptions: (a) The primary C-C bond is formed from surface methoxyl groups via the methoxyl group polarization and C-H bond weakening, (b) The adsorbed alkoxyls are converted to aromatics via hydrogen transfer and bond rearrangement similar to the conventional carbenium ion mechanism for the aromatization of olefins and alkanes on HZSM5. The hydrogen atoms from the aromatization stimulate the desorption of alkoxyls to alkanes. (c) At temperature higher than 300°C surface reactions and desorption of adsorbed species take place simultaneously, determining the product distribution in the catalytic conversion.     

1998年九江抗洪启示录

简述1998年江西特大洪水的基本情况，重点介绍了九江防洪的形势和九江长江城防堤4～5号闸口间堤段溃决的情况及堵口过程，并总结了经验教训和抗洪工作的体会．     

Single and combined deactivating effect of alkali metals and HCl on commercial SCR catalysts

Two commercial SCR catalysts, with a nominal W content of about 9 wt.% and a V nominal content of 0.55 and 1.8 wt.%, respectively, were contacted with different amounts of Na and K and with HCl vapours in order to simulate poisoning by species more specifically contained in exhaust gases from MSW combustion. Catalysts were characterised using XRD analysis, SEM/EDX analysis, BET and pore size distribution measurements, NH₃ TPD, TG analysis. Poisoning agents do not cause loss of surface area nor pore occlusion. A significant loss of surface acidity was observed upon alkali metals poisoning whereas a decreasing of vanadium content was observed for the more concentrated catalysts upon HCl poisoning. Catalysts deactivation is proportional to the number of acid sites neutralised by alkali metals adsorbing ammonia in the temperature range typical of SCR process. HCl promotes the formation of new acid sites showing a lower activity compared to the original one.     

利用抽余碳五馏份制备TAME

探索了以抽余Ｃ５为原料经与甲醇醚化制ＴＡＭＥ的过程。试验表明，在国产催化剂Ｄ５４型大孔阳离子交换树脂存在下，在反应温度６０℃、ＬＨＳＶ２．４ｈ－１、甲醇／异戊烯物质的量比１．００、反应压力０．２ＭＰａ的条件下，抽余Ｃ５中的异戊烯可与甲醇反应生成醚，异戊烯的转化率达６３．２６％，ＴＡＭＥ的选择性可达９９．６１％。     

两步法合成2-氨基-5-硝基苯酚

以邻氨基苯酚和尿素为原料,将传统环合-硝化-水解三步法工艺改为环合硝化-水解两步法合成了2-氨基-5-硝基苯酚(ANP);研究了影响环合硝化反应和水解反应的因素;优化了反应条件。环合硝化反应的最优条件为:n(邻氨基苯酚)∶n(尿素)=1.00∶1.20、环合时间6h、硝酸用量40.2g、硫酸用量20g、硝化时间3h、硝化温度70℃,在此条件下中间产物6-硝基苯并噁唑酮的收率为90.2%;水解反应的最优条件为:体积分数95%的乙醇为溶剂、n(6-硝基苯并噁唑酮)∶n(氢氧化钠)=1.0∶3.3、水解温度80℃、水解时间15h,在此条件下ANP收率为81.2%。两步反应ANP的总收率为73.2%。对产品进行了元素分析和红外光谱表征,确认终产物为ANP。该方法成本低,ANP总收率高,溶剂可回收,三废量少。     

活性碳和5A分子筛的吸附特性及其在真空获得中的作用

评述了活性碳和５Ａ分子筛的吸附等温线及其在真空佩温绝热夹层真空获得中的作用。分析了真空夹层抽真空除气时用Ｎ＿２气置换以及用“多次吸附－脱附Ｎ＿２气”方法活化吸附剂等先进工艺的机理。论述了根据吸附剂吸水的吸附等温线，合理确定活化工艺条件的方法。