2001世界陶瓷原料市场分析与预测

近几年陶瓷原料工业呈稳步发展 ,反映了陶瓷工业强大的发展势头。 1 999年度大多数陶瓷原料的生产和销售都有所增长 ,预示着未来陶瓷原料工业的成功。以下是几种在陶瓷工业领域应用较广泛的陶瓷原料的生产与消费情况。通过对这几种陶瓷原料生产和消费情况的分析 ,对未来陶瓷原料市场做出了预测 ,旨在给各陶瓷企业的生产提供一定的参考     

The Structure of the Irreversibly Bound Adhesion Promoter-Substrate Interfacial Layer of γ-Aminopropylsilanetriol on Crystalline Si, as Measured by XPS and FTIR

The irreversibly bound interfacial layer deposited by the γ-aminopropysilanetriol adhesion promoter onto a crystalline silicon substrate, which remains even after profuse washing, was found by XPS to have resulted from the fragmentation and rearrangement of the original γ-aminopropylsilanetriol molecule. A mechanism is proposed, involving the homolytic scission of the terminal N-C bond. One of the subsequent reactions is believed to involve hydrogen loss by abstraction and the formation of a terminal vinyl group, which bonds to the substrate. Support for this mechanism is found in IR spectroscopy of this layer.     

Low-Thermal-Conductivity Rare-Earth Zirconates for Potential Thermal-Barrier-Coating Applications

Rare-earth zirconates have been identified as a class of low-thermal-conductivity ceramics for possible use in thermal barrier coatings (TBCs) for gas-turbine engine applications. To document and compare the thermal conductivities of important rare-earth zirconates, we have measured the thermal conductivities of the following hot-pressed ceramics: (i) Gd₂Zr₂O₇ (pyrochlore phase), (ii) Gd₂Zr₂O₇ (fluorite phase), (iii) Gd_2.58Zr_1.57O₇ (fluorite phase), (iv) Nd₂Zr₂O₇ (pyrochlore phase), and (v) Sm₂Zr₂O₇ (pyrochlore phase). We have also measured the thermal conductivity of pressureless-sintered 7 wt% yttria-stabilized zirconia (7YSZ)—the commonly used composition in current TBCs. All rare-earth zirconates investigated here showed nearly identical thermal conductivities, all of which were ∼30% lower than the thermal conductivity of 7YSZ in the temperature range 25°–700°C. This finding is discussed qualitatively with reference to thermal-conductivity theory.     

气相色谱中保留指数随温度变化规律的研究

根据保留指数随温度变化的关系式得出保留指数随温度变化的三种规律,运用气相色谱实验获得了较好的验证;并从色谱热力学函数分析了保留指数随温度变化规律的主要原因是由于在色谱分离过程中不同的熵变和焓变所造成的。     

Quantification of response time in poly(vinyl alcohol)–metal complex thermochromic polymeric systems

Thermochromic poly(vinyl alcohol) (PVA)‐based material was synthesized and an extensive study of its thermochromic behavior with respect to response time was carried out. It was observed that it is possible to manipulate the response time by keeping control over chemical and physical parameters. The response time, which is the most important property of a smart material, has in this case been found to be very much influenced by rate of heat transfer into the material. Different compositions of the thermochromic material and their corresponding response time with respect to rate of heat transfer were studied and correlated. First, a theoretical equation was derived and later on it was experimentally verified to quantify the response time in PVA–metal complex‐based thermochromic systems. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4832–4834, 2006     

Evaluation of oxidative stability of canola oils by headspace analysis

Lipid oxidation is a major factor affecting flavor quality and shelf life of vegetable oils. Oxidative stability is therefore an important criterion by which oils are judged for usefulness in various food applications. In this study a method based on headspace analysis was developed to evaluate relative oxidative stability of canola oils. The method does not require the use of chemicals, involves minimal sample preparation, and can be performed on a relatively small sample size in comparison with traditional wet chemical methods. Canola oils freshly extracted in the laboratory from different seed samples were subjected to accelerated oxidation and analyzed for PV by standard methods and headspace volatiles by solid phase microextraction/GC-MS. Forward stepwise regression analysis of the data revealed a relationship between PV and headspace concentration of the volatile lipid oxidation products hexanal and trans,trans-2,4-heptadienal. The PV calculated using this formula correlated (R ²=0.73) with those measured by conventional methods. Presented in part at the 96th Annual Meeting of the AOCS, 1–4 May 2005, Salt Lake City, UT.     

哈氏合金设备的设计与施工

介绍哈氏合金的类型及耐腐蚀性能,从设计、成型、焊接和机械加工等方 面提出了制造哈氏合金设备的有关注意事项。     

铝矾土陶瓷材料的试制

利用丰富的铝矾土原料在1350℃的烧成温度下试制出一种热稳定性极好的陶瓷材料。     

Copolymerization in UF/pMDI adhesives networks

Kinetic evidence in thermomechanical analysis experiments and carbon‐13 nuclear magnetic resonance spectroscopy (¹³C NMR) evidence indicates that the strength of a joint bonded with UF (urea–formaldehyde)/polymeric 4,4'‐diphenylmethane diisocyanate (pMDI) glue mixes is improved by coreaction of the methylol groups of UF resins with pMDI to form a certain number of methylene cross‐links. The formation of these methylene cross‐links is predominant, rather than formation of urethane bridges which still appear to form but which are in great minority. This reaction occurs in presence of water and under the predominantly acid hardening conditions, which is characteristic of aminoplastic resins (thus, in presence of a hardener). Coreaction occurs to a much lesser extent under alkaline conditions (hence, without UF resins hardeners). The predominant reaction is then different in UF/pMDI adhesive systems than that observed in phenol‐formaldehyde (PF)/pMDI adhesive systems. The same reaction observed for UF/pMDI system at higher temperatures has also been observed in PF/pMDI systems, but only at lower temperatures. The water introduced in the UF/pMDI mix by addition of the UF resin solution has been shown not to react with pMDI to an extent such as to contribute much, if at all, to the increase in strength of the hardened adhesive. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3681–3688, 2002     

Fractionation of partially stereoregular poly(propylene oxide)

Partially stereoregular poly(propylene oxide) samples were synthesized via reactions catalysed by a preformed analytically defined trimethylaluminium hydrolysate. These samples were fractionated into two contrastingly different fractions.

1. (i) D-polymers: This fraction constituted the major part (up to 90%). It mainly contained cyclic low molecular weight oligomers (MW < 1000). The linear chains found in D-polymers had hydroxyl end groups. No double bonds could be detected spectroscopically.

2. (ii) K-polymers: This fraction was high molecular weight stereoregular polymer. Stepwise thermal precipitation from dilute isooctane solution of K-polymers yielded a succession of fractions which differed in melting point. It appears that the phase equilibria during the thermal precipitations were not controlled by the molecular weights of species.