Yeast sequencing reports. Isolation and sequence analysis of a gene from the linear DNA plasmid pPAC1–2 of Pichia acaciae that shows similarity to a killer toxin gene of Kluyveromyces lactis

The toxin-encoding linear plasmid systems found in Pichia acaciae and Kluyveromyces lactis yeasts appear to be quite similar, both in function and structural organization. By Southern hybridization, a linear plasmid of P. acaciae, pPac1–2, was found to hybridize to the second open reading frame (ORF2) of K. lactis plasmid pGKL1, known to encode the α and β subunits of the K. lactis toxin. A 1·7 kbp segment of pPac1–2 DNA was cloned, sequenced and shown to contain four regions of strong homology to four similarly oriented regions of K. lactis ORF2. This 1·7 kbp fragment also contained an ORF of 1473 bp that could encode a protein of ～ 55·8 kDa. Like the α subunit gene of K. lactis ORF2, a very hydrophobic region occurs at the N-terminus, perhaps representing a signal sequence for transport out of the cell. Unlike K. lactis ORF2, however, the encoded polypeptide is much smaller and lacks a recognizable domain common to chitinases. The structure of a toxin that includes the translation product of this P. acaciae ORF would likely be quite different from that of the K. lactis toxin. Analysis of the upstream region of the P. acaciae ORF revealed an upstream conserved sequence identical to that found before ORFs 8 and 9 of pGKL2. A possible hairpin loop structure, as has been described for each of the four K. lactis pGKL1 ORFs, was found just upstream of the presumed start codon. The similarity of the promoter-like elements found in the linear plasmid genes of these diverse yeasts reinforces the idea of the existence of a unique, but highly conserved, expression system for these novel plasmids. The sequence has been deposited in the GenBank data library under Accession Number U02596.     

Ti-23Al-14Nb-3V合金氩弧焊接头的显微组织及其力学性能

研究了预热对Ｔｉ－２３Ａｌ－１４Ｎｂ－３Ｖ合金焊接性，特别是对消除氩弧焊冷裂纹的作用以及对接头显微组织和力学性能的影响。结果表明，焊前预热可有效降低该合金的冷裂倾向。经预热处理后，焊缝区的结晶层状线消失，热影响区的硬度峰得到缓和，整个焊缝的显微硬度分布趋于均匀，但焊缝区的枝晶发生粗化，热影响区有所扩大。焊件接头的拉伸试验表明，预热可使焊缝区的接头强度系数增加，但无论预热与否，接头强度均低于母材强度，且不显示宏观塑性。     

Electrostatic polymer processing of isotactic poly(4-methyl-1-pentene) fibrous membrane

Isotactic poly(4-methyl-1-pentene) (P4M1P) is a widely used polymer in industrial applications and specifically, in medical products. Producing micro- or nanofibers would expand the usefulness of P4M1P to a broad range of medical applications. The choice and quality of solvent for the solution used for electrospinning can have a dramatic effect on the spinnability of fibers and on their morphological appearance. In this study, four solvent systems: cyclohexane, cyclohexane/acetone mixture, cyclohexane/dimethyl formamide (DMF) mixture and cyclohexane/acetone/DMF mixture have been investigated. As demonstrated by FE-SEM, electrospun fibers with different morphologies including round, twisted with a roughened texture, curled and twisted-ribbon shapes were formed. The fiber shape and morphology depended strongly on the type and amount of non-solvent used.     

LXT384接口芯片的几种环回形式

LXT384是一个用于SONET/SDH设备的八进制T1/E1/J1线路接口单元芯片。文中简述了该芯片在实际应用中进行自检的若干种不同的环回形式(包括：模拟环回、数字环回、运程环回等)，直观地指出了各种环回形式的特点和区别。     

膨胀水泥浆体系在苏丹1/2/4区块水平井固井中的应用

随着苏丹1／2／4区块的深入开发，为了加快开发主力油层，提高原油产量，降低钻井成本，GNPOC在此区块布置水平井开发任务。所开发的区域主要分布于Heglig，Munga，Simbir，Bamboo区块，油层所在是Zaqar和Bentiue地层。此层位具有高渗透，地层温度高，易塌、气窜等复杂问题，尤其是Heglig和Munga地区井壁坍塌严重。为此，根据地质资料、井身结构和对水平井注水泥的技术要求，科学合理设计施工工艺，优选出适合此地区固井施工的冲洗液和隔离液，特别是经过努力实践，开发出了新型膨胀水泥浆体系，此体系具有高强度、低失水、无析水、防气窜之功效。结合使用哈里伯顿CPT—Y4大功率固井车，精确计量和自动密度控制，该体系水泥浆目前已在7口水平井施工中得以应用，均为优质井。现正在被大量使用，此体系的开发，解决了该固井技术难题，创造了中国固井在海外首次水平井作业一次成功的历史记录，具有较高的经济和社会效益。     

科钻一井扩孔器的研制及应用

科钻一井在取心钻进中为了尽量避免大段划眼(扩孔),在钻具组合中岩心筒的上、下部位各装一套扩孔器,为此,采用无压浸渍焊接工艺研制出φ157．3 mm碳化钨胎体式表镶φ3mm×5 mm人造聚晶金刚石扩孔器。科钻一井99只扩孔器的现场应用证明,该扩孔器使用寿命较长,满足了全井取心钻进的需要,是一种较好的取心钻具配件,也有助于提高和完善我国硬岩深井大直径取心钻进技术。     

The complete sequence of a 10.8 kb segment distal of SUF2 on the right arm of chromosome III from Saccharomyces cerevisiae reveals seven open reading frames including the RVS161, ADP1 and PGK genes.

We have entirely sequenced a 10,835 bp segment of the right arm from chromosome III contained in the J11D and J11D-K3B GF clones. The segment contains seven open reading frames longer then 100 amino acids. Three of them, RVS161 (Urdaci et al., 1990; Crouzet et al., 1991), ADP1 (Purnelle et al., 1991) and PGK1 (Hitzeman et al., 1982) have been described previously. YCR10C encodes a putative membrane protein. YCR8W (encoding a putative protein kinase) and YCR14C extend inside the D10H (Skala et al., 1991) and 62B5-2D clones respectively. Four ARS elements previously reported by Palzkill et al. (1986) are located between RVS161 and YCR10C.     

Analysis of the MSS51 region on chromosome XII of Saccharomyces cerevisiae.

We have localized gene MSS51 on chromosome XII of Saccharomyces cerevisiae between the RDN1 and CDC42 loci. 'Head to head' with MSS51 is another gene, QRI5, the function of which is unknown. However, the proximity of these genes, the structure of the intergenic region and the presence of an ABF1 binding site right in the middle of this region suggest that the MSS51 and QRI5 expressions are submitted to a common regulatory process.     

Parameters affecting the frequencies of transformation and co-transformation with synthetic oligonucleotides in yeast.

Factors influencing the direct transformation of the yeast Saccharomyces cerevisiae with synthetic oligonucleotides were investigated by selecting for cyc1 transformants that contained at least partially functional iso-1-cytochrome c. Approximately 3 x 10(4) transformants, constituting 0.1% of the cells, were obtained by using 1 mg of oligonucleotide in the reaction mixture. Carrier, such as heterogeneous oligonucleotides, enhanced transformation frequencies. Transformation frequencies were dramatically reduced if the oligonucleotides had a large number of mismatches or had terminally located mismatches. Transformation with oligonucleotides, but not with linearized double-strand plasmid, was efficient in a rad52- strain, suggesting that the pathway for transformation with oligonucleotides is different from that with linearized double-strand plasmid. We describe a procedure of co-transformation with two oligonucleotides, one correcting the cyc1 defect of the target allele in the host strain, and the other producing a desired amino acid alteration elsewhere in the iso-1-cytochrome c molecule; approximately 20% of the transformants obtained by co-transformation contained these desired second alterations.     

包装发展需要环境友好包装材料

环境友好包装材料是一类具有环境意识特征的概念.环境友好包装材料依据“4R 1D“原则,注重包装材料与环境的协调性,指导包装材料的研发,一是有利于保护自然资源;二是对生态环境损害最少化.运用环境友好包装材料的概念,实现包装的可持续发展.