整体毡纤维体积分数对CVD增密的影响

将3组不同纤维体积分数的整体毡采用等温CVD进行沉积热解炭增密,结合CVD沉积过程中整体毡内气体传质数学模型,研究了整体毡的纤维体积分数对CVD增密过程的影响,研究结果表明:纤维体积低的整体毡沉积时增重率高;纤维体积分数高的整体毡容易获得较高密度的C/C复合材料;纤维体积分数超过35％的整体毡经过300 h的化学气相沉积,坯体的体积密度能达到1.52 g/cm~3。     

浅谈城市道路立交的概念性方案设计

通过南昌市某快速路的设计实例，认识到搞好快速路沿线各交叉口的方案设计是快速路规划设计的关键内容。道路交叉口设计应注重交通功能分析，满足路口交通需求，同时也不能忽视立交的景观要求。     

矿用交换机用户线接口电路

介绍了一种由新型集成芯片组成的电话用户线接口电路，由用户线功能块DTLM630和可编程单片全双工增量调制解调器CMX639等组成。由于芯片的高度集成化，从而使电路结构简单，使用可靠，是一种新型实用的用户线接口电路。     

Evaluation of Serum Volume Losses During Long-Term Storage

Aliquots of serum collected in a large case-control study of cervical cancer were stored at −70°C for up to 4 years during implementation of the study. When 500 μL serum aliquots were thawed in preparation for carotenoid and vitamin A assays, volumes were noticeably variable and fell below 500 μL in the majority of the samples. We were concerned about evaporation/sublimation during storage of the samples because loss of water would concentrate the analytes of interest. We evaluated the use of density and sodium ion concentration measurements to confirm its occurrence. We found that serum density was an unreliable indicator of extent of volume loss since the anticipated increases in density due to evaporation were of the same magnitude as inter-individual variation in serum density. In contrast, Na⁺ concentration is tightly regulated and would rise if water had been lost from the samples. In a representative sample of serum aliquots from the case-control study, 24 of 25 vials contained less than 500 μL of serum. The mean sodium ion concentration (138.1 ± 3.6 mmol/L) was within the normal range for human serum of 136–145 mmol/L, and no correlation was observed between serum volume and Na⁺ concentration. These results strongly suggest that the observed low volumes were not due to evaporative losses. Instead, the variably low volumes of serum aliquots were probably due to pipetting errors in the initial aliquotting resulting from the use of air-displacement pipettes.     

Optimisation of metallic pigments in coatings by an electrochemical technique and an investigation of manganese powder as pigment for metal rich primers

Zinc dust and manganese powder as pigments were incorporated in epoxy-polyamide and butyl titanate medium, with different pigment volume concentration (PVC) ranging from 20 to 74. These protective coatings were coated on sand blasted mild steel substrates and immersed in 3 wt.% sodium chloride solution and the corrosion current was measured by the Tafel extrapolation method. From the corrosion current produced by these primers, the optimum level of the pigments in these binders was identified. Thus the protective performance of optimised primers was evaluated on a sand blasted mild steel surface by the Tafel polarisation method in 3 wt.% sodium chloride solution, over different periods of time. The results were found to be comparable with the salt spray test and galvanic current measurements. The manganese powder used for this investigation showed that it could be used as an alternative to zinc powder for metal rich primers.     

隆德县大水沟饮水工程建设与管理措施分析

隆德县在大水沟农村饮水工程建设管理中，科学规划，优化设计方案，完善政策措施，创新管理体制和运行机制，尤其是用水户全过程参与工程建设管理、实行“两部制”水价、实施工程定期检查养护制度、建立工程管理单位目标责任考核制度、执行水费统一管理和提留统筹费等一系列做法．确保了国家投资效益的充分发挥和工程的可持续利用．     

Viscous behaviour of glass-forming liquids: a thermodynamic approach

The temperature dependence of the viscosity of the undercooled melts exhibits an important role in the study of nucleation, crystal growth and the glass-forming ability of materials. Several attempts have been made to study the viscous behaviour of the glass-forming melts and these investigations are mainly based on free volume theory as well as on the configurational entropy model. In the present investigation, an attempt has been made to correlate the thermodynamic parameters with the viscosity of the glass-forming melts and to study the temperature dependence of the viscosity of undercooled liquids on the basis of the free volume theory as well as on the basis of the configurational entropy model of Adam and Gibbs. The entire study is confined on the expression for thermodynamic parameters reported by the authors recently. The expression obtained has been successfully applied to study the temperature dependence of the viscosity of the metallic, molecular and oxide glass-forming liquids.     

浅谈原油顺序输送过程中混油量的计算

针对原油顺序输送工艺的特点,分析了原油顺序输送产生混油量的原因,给出了混油量计算公式。指出混油的形成与输送距离、油品种类、输量、停输时间、地形等有关。举例对东黄复线顺序输送所产生的混油量进行分析计算,给出了顺序输送过程中减少混油量的措施。     

VHF-PECVD制备微晶硅材料的均匀性及其结构特性的分析

采用VHF-PECVD技术在多功能系统(cluster tool)中制备了系列硅薄膜，研究薄膜的均匀性及电学特性和结构特性。结果表明：气压和功率的合理匹配对薄膜的均匀性有很大的影响；材料的喇曼测试和电学测试结果表明微晶硅薄膜存在着纵向的结构不均匀，在将材料应用于器件上时，必须要考虑优化合适的工艺条件；硅烷浓度大，相应制备薄膜的晶化程度减弱，即薄膜中非晶成分增多。