Engaging High‐Sensation Seekers: The Dynamic Interplay of Sensation Seeking,Message Visual‐Auditory Complexity and Arousing Content

This study extends the research on message‐sensation value (MSV) by treating it as a dynamic stream of complex visual‐auditory information and arousing content (MSV‐d). Real‐time attentional and emotional responses to this dynamic stream during the PSA viewing process are indicated by psychophysiological measures. Dynamic models are used to systematically examine endogenous and exogenous influences on message processing to more accurately understand the effects of MSV‐d variables and individuals' sensation seeking tendencies during the processing of the PSAs. An important finding is that generally, increasing visual‐auditory complexity activates an approach tendency in those with high sensation‐seeking tendencies but activates an avoidance tendency in those with low sensation‐seeking tendencies, and this response pattern is moderated by arousing content.     

采用红外光谱鉴别天然胶乳掺假的分析与处理

在天然胶乳中按不同比例掺入木薯粉或面粉,制备掺假天然胶乳,采用傅里叶转换红外光谱进行表征和分析。 结果表明：在天然胶乳中掺入木薯粉或面粉,红外光谱在3 500～4 000 cm-1波段出现指纹区,掺入量越高,指纹区的波动幅度越大;在木薯粉或面粉的特征谱带,随着掺入量的增大,吸收强度增强。     

胶乳分离机高速转鼓内流场的数值分析

为了得到胶乳分离机高速转鼓在离心力场作用下的内部流场规律,建立胶乳物理特征、转鼓结构及转速与流场压力、速度之间的相互关系。基于FLUENT软件,对仿真建模、边界条件设置、计算方法进行了研究;选择混合多相流和层流模型,利用转鼓流场二维模型对内部流场进行了数值模拟,分析得到了流场的压力云图、速度云图以及出流区速度矢量图,定量评价了不同转速下流场压力、速度的变化,提出了一种利用特征参数验证模型的方法。分析结果表明:转鼓内流体压力、速度与流体所处半径成正比,流体速度、压力分别与转鼓转速呈一次、二次正比例关系,在工作转速下最大液体压力为10.4 MPa,重相出流区比轻相出流区存在更明显的漩涡现象,碟片间隙内液体流动状态为层流,仿真结果与理论计算值、文献压力数据及特征参数实测值较一致,验证了分析模型和分析方法的有效性。本研究为胶乳离心分离工艺、转鼓流场及结构优化提供了理论依据和分析方法。     

溴化丁基橡胶乳化工艺技术研究

采用乳化工艺制备了溴化丁基橡胶（BIIR）胶乳,研究了乳化剂种类、BIIR正己烷溶液浓度、乳化时间、乳化转速、胶乳体系pH值及蒸馏方式对BIIR胶乳的影响。结果表明,乳化BIIR的最佳条件为:BIIR正己烷溶液中BIIR质量分数为15.00%,体系pH值调节至11～12,高速剪切乳化时间为30 min,高剪转速为5 500～6 000 r/min,采用负压（压力为-0.04 MPa）旋转蒸馏,所得BIIR胶乳的蒸馏破乳率较低,且总固物质量分数可以达到45.00%以上;使用质量分数为20%的氯化钙溶液破乳成膜效果最佳。     

开停真空泵控制变压吸附产品气中CO_2含量总结

介绍闪蒸气变压吸附装置投用后,尝试采用开停真空泵、调整真空度的办法,控制产品气中CO2含量的情况。     

PSA氢回收装置工艺优化简介

介绍600kt/a甲醇装置PSA氢回收系统的运行情况,通过现场数据与理论数据的对比,探讨工艺操作优化措施,并实现了增产降耗。     

Photo-vulcanization using thiol-ene chemistry: Film formation,morphology and network characteristics of UV crosslinked rubber latices

The photo-vulcanization with versatile thiol-ene chemistry represents an innovative approach to crosslink diene-rubber materials both in latex and in solid film state. In this work, the structure of elastomer-based thiol-ene networks and the morphology after film formation are studied in detail using electron microscopic techniques, atomic force microscopy and multiple-quantum solid-state NMR spectroscopy. Additionally, film formation properties and corresponding macroscopic properties of photo-vulcanized natural rubber (NR) latex and its synthetic counterpart, isoprene rubber (IR) latex, are determined in dependence on the curing procedure (pre- and post-vulcanization). The results reveal that thiol-ene cured elastomers comprise homogenously distributed crosslinks with a low amount of short chain defects. Whilst photochemically pre-cured NR latex particles provide coherent films, the film formation and mechanical properties of IR are strongly governed by the crosslink density of the latex particles. In film state, photo-vulcanization promotes narrow crosslink distributions and excellent tensile properties of both NR and IR.     

改善胶乳三腔双囊胃管质量的生产工艺研究

以浓缩天然胶乳并用20份MG49天甲胶乳作胃管基础管身胶料可有效提高管身硬度和撕裂强度,并解决纯天然胶乳管身硬度不足、临床不易插管的难题,而对产品工艺性能及其他性能无不良影响。用"硝酸钙+工业酒精+表面活性剂"代替"硝酸钙+生粉附型剂+表面活性剂"作凝固体系,可改善胃管球囊胶膜厚度的均匀性。对胃管球囊内表面做适度氯化处理,可克服球囊与胃管管身产生的粘连或粘伤。适当改变绑线位置可有效减少胃管球囊胶膜出现的龟裂纹;球囊绑线处涂覆氯仿值二中~三中(见表9注)、总固体25%~35%的胶料3~4次,可获得较好涂胶效果。     

零VOC乳胶涂料的研究进展

在分析乳胶涂料中VOC主要来源的基础上,从乳液合成和助剂选择两方面阐述了消除VOC的途径.详细探讨了利用核壳乳液聚合、引入功能性单体和软硬乳液混拼等思路来解决乳液的高玻璃化温度(Tg)和最低成膜温度(MFT)之间的矛盾,并简单介绍了零VOC乳胶涂料中极低VOC含量的检测方法和标准.     

变压吸附空气分离制氧微型化技术研究

对压缩机、吸附剂、工艺流程、吸附器结构以及制氧机的结构与外观进行了深入分析,结果表明,开发新型节能的微型压缩机,开发适用于微型制氧机的锂分子筛和节能的工艺流程是变压吸附空分制氧微型化的根本途径,优化吸附器结构和制氧机的结构与外观是优化微型变压吸附制氧机的重要方法,是提高制氧机市场竞争力的有效措施。