胶乳汽提脱除单体的机理及数学模型

本文研究了丁苯吡胶乳的脱气机理,实验证明了这个包括有多个传质阶段的复杂传质过程是由单体从胶粒内扩散到表面并穿过界面进入液相的传质阶段所控制。从这一机理出发,选择了脱气过程的工艺条件。通过简化脱气过程的物理模型,从理论上推导出脱气过程的数学模型,并用实验证实了这一模型。通过对多种胶乳及各种脱气设备的应用,证明该模型具有普遍性。本文提出用定义的脱气速度常数来研究和设计脱气过程的方法。     

松香基丙烯酸酯核-壳共聚压敏胶的研制

以丙烯酸酯类为原料,采用核壳共聚合成出压敏胶乳液,讨论了核、壳乳液配比、引发剂、乳化剂、相比等因素对乳液性能的影响,并用自制的松香酯乳液对压敏胶进行了改性,得出了松香酯乳液适宜的质量分数为20%。测定了改性后的压敏胶性能,其指标为:初粘力为12(球号),持粘力为7 h,180°剥离强度每25 mm为6 N,与同类压敏胶相比较,综合性能良好。     

Semi-continuous emulsion copolymerization of butyl methacrylate with polymerizable anionic surfactants

Two polymerizable anionic surfactants sodium 4-(ω-acryloyloxyalkyl)oxy benzene sulfonate (SABS-n, n=8 or 10) have been successfully used in the semi-continuous emulsion copolymerization with butyl methacrylate (BMA). After generating seeding particles in an emulsion consisting SABS-8 or SABS-10 and small amount of BMA using a redox initiator ammonium persulfate (APS)/tetramethylethylenediamine (TMEDA) at room temperature, most of BMA was added drop-wise to the polymerizing emulsion system during a period of 4-8 h. These emulsion copolymerizations produced nanosized latexes with high polymer/surfactant weight ratios up to about 12/1 and nearly monodisperse particles ranging from 18 to 33 nm in diameter. X-ray photoelectron spectroscopy results showed that SABS-n was significantly enriched on the surface of latex particles. The effects of concentrations of SABS-n, BMA, and APS/TMEDA and the latex characteristics during the continuous addition of monomer were studied. A possible polymerization mechanism was proposed.     

专用丁苯胶乳对混凝土的改性

用自制的专用丁苯胶乳对混凝土进行改性,考察了聚合物与混凝土质量比(简称聚灰比)、水与混凝土质量比(简称水灰比)、消泡剂用量、养护条件和胶乳稳定性对改性混凝土性能的影响。结果表明,当聚灰比为12%、水灰比为35%、消泡剂质量分数为丁苯胶乳的3%时,且在混凝土浇铸后干养28d的条件下,改性混凝土的抗压强度、抗折强度、黏结强度及抗渗性比未改性混凝土分别提高了6%,9%,85%,50%。稳定性越好的胶乳对改性混凝土的性能提高幅度越大。     

天然胶乳床垫和枕芯的发展

综述介绍天然胶乳床垫和枕芯的生产工艺、产品特性以及存在的问题。天然胶乳床垫和枕芯的生产工艺主要有邓禄普法和塔勒莱法胶乳发泡工艺,塔勒莱法工艺先进,但受设备结构复杂和投资大的限制,只有少数公司采用;邓禄普法性价比高,工艺趋于完善,被大多数厂家采用。天然胶乳床垫和枕芯具有优异的弹性、支撑性、透气性和抑菌抗螨功能,与睡眠者有良好的贴合性,可提高睡眠质量。巨大的市场需求导致天然胶乳床垫和枕芯产品存在部分假冒伪劣和粗制滥造产品,需要监管部门尽快制订产品标准并加强管理,引导和规范天然胶乳床垫和枕芯生产行业健康发展。     

Thermal,mechanical and drug release characteristics of an acrylic film using active pharmaceutical ingredient as non-traditional plasticizer

Abstract

The objective of this study was to investigate thermal and mechanical properties as well as in vitro drug release of Eudragit® RL (ERL) film using chlorpheniramine maleate (CPM) as either active pharmaceutical ingredient or non-traditional plasticizer. Differential scanning calorimeter was used to measure the glass transition temperature (T_g) of 0–100% w/w CPM in ERL physical mixture. Instron testing machine was used to investigate Young’s modulus, tensile stress and tensile strain (%) of ERL film containing 20–60% w/w CPM. Finally, a Franz diffusion cell was used to study drug release from ERL films obtained from four formulations, i.e. CRHP0/0, CRHP0/5, CRHP2/0 and CRHP2/5. The T_g of ERL was decreased when the weight percentage of CPM increased. The reduction of the T_g could be described by Kwei equation, indicating the interaction between CPM and ERL. Modulus and tensile stress decreased whereas tensile strain (%) increased when weight percentage of CPM increased. The change of mechanical properties was associated with the reduction of the T_g when weight percentage of CPM increased. ERL films obtained from four formulations could release the drug in no less than 10?h. Cumulative amount of drug release per unit area of ERL film containing only CPM (CRHP0/0) was lower than those obtained from the formulations containing traditional plasticizer (CRHP0/5), surfactant (CRHP2/0) or both of them (CRHP2/5). The increase of drug release was a result of the increase of drug permeability through ERL film and drug solubility based on traditional plasticizer and surfactant, respectively.     

丁苯橡胶/炭黑湿法预混胶的塑炼特性

基于胶乳/炭黑湿法混合的丁苯橡胶/炭黑湿法预混胶(P(SBR/CB))是一种在低剪切力环境下制备得到的炭黑在丁苯橡胶基体中分散优良的橡胶/炭黑预混胶,与采用传统机械混炼得到的充炭黑母胶相比,未经塑炼加工的P(SBR/CB)中的橡胶-炭黑相互作用较弱,故其加工行为表现出诸多新的特点。本文在分析P(SBR/CB)结构的基础上,采用实验室开炼机和Brabender转矩流变仪研究了其塑炼特性,探讨了开炼机薄通次数和密炼机塑炼工艺参数(循环油温、转速、塑炼时间等)对其塑炼特性(表观黏度、门尼黏度、排胶温度和结合胶含量)的影响规律,发现P(SBR/CB)的塑炼过程主要包括2个同时进行的进程,即炭黑网络的破坏和橡胶-炭黑相互作用的增强,且可通过调节密炼机塑炼参数,调控P(SBR/CB)混炼胶的门尼黏度和结合胶含量。     

水分对分子筛结构及吸附性能的影响

分子筛是变压吸附制氧过程中最重要的组分,使用中该组分常出现吸水失效问题,极大地影响了氧产量及浓度.针对此问题,本文以HD-1型和PU-8型分子筛为原料,通过在不同温度(100、200、300、400℃)下活化得到不同含水量的分子筛,并通过对不同材料的结构形貌、热性能及吸附性能的表征分析了水分对分子筛结构及吸附性能的影响.研究结果表明:水分不会破坏分子筛的骨架结构,但会增大晶胞参数,并导致HD-1型分子筛中阳离子迁移;分子筛中的物理吸附水和化学结晶水会影响其吸附性能,其中物理吸附水的影响最大;活化有效提高了分子筛的吸附性能,且温度越高,含水量越少,吸附性能越好;在150~180℃下活化,将物理吸附水脱附后,分子筛的吸附能力可恢复70%,可在此温度下进行吸附器内低温活化;在400℃下活化,脱除化学结晶水,分子筛吸附性能可100%恢复,400℃为两种分子筛的最佳活化温度.     

A perturbed particle swarm algorithm for numerical optimization

The canonical particle swarm optimization (PSO) has its own disadvantages, such as the high speed of convergence which often implies a rapid loss of diversity during the optimization process, which inevitably leads to undesirable premature convergence. In order to overcome the disadvantage of PSO, a perturbed particle swarm algorithm (pPSA) is presented based on the new particle updating strategy which is based upon the concept of perturbed global best to deal with the problem of premature convergence and diversity maintenance within the swarm. A linear model and a random model together with the initial max–min model are provided to understand and analyze the uncertainty of perturbed particle updating strategy. pPSA is validated using 12 standard test functions. The preliminary results indicate that pPSO performs much better than PSO both in quality of solutions and robustness and comparable with GCPSO. The experiments confirm us that the perturbed particle updating strategy is an encouraging strategy for stochastic heuristic algorithms and the max–min model is a promising model on the concept of possibility measure.     

新型阻燃氯丁胶乳阻燃、黏合体系及其浸渍工艺的研究

研究了新型阻燃氯丁胶乳的阻燃和黏合性能及其影响因素．试验结果表明,当Sb2O3的添加量为10．6份时,胶乳的阻燃性能大幅度提高;在CR中加入粘合剂RF／RA（添加量比为4：4．6）可在一定程度上提高帆布／橡胶层的黏合性能;浸渍工艺对阻燃和黏合也有一定程度的影响,且一浴浸渍异氰酸酯和环氧树脂,烘干温度为105℃,时间为10min,二浴采用15％的氯丁胶乳浸渍2次,并经过105℃预烘干和200℃快速定型,氯丁胶乳的阻燃和黏合强度最大．